Wraps by car

Xpeng G7 wrap

This page covers the Xpeng G7 wrap and the vinyl wrap film a full wrap of the newest body takes. The Xpeng G7 is a five-door SUV in its first generation, produced from 2025 to the present. A complete color change wrap of this car uses about 66 ft (20 m) of 60-inch (1.52 m) cast film.

1generations20 mof film for a full wrap

Xpeng G7, first generation, factory photo
Xpeng G7, first generation. Factory color shown.

Xpeng G7 wrap colors and ideas

  • Xpeng G7 black wrap
  • Xpeng G7 white wrap
  • Xpeng G7 gray wrap
  • Xpeng G7 silver wrap
  • Xpeng G7 red wrap
  • Xpeng G7 blue wrap
  • Xpeng G7 green wrap
  • Xpeng G7 yellow wrap
  • Xpeng G7 orange wrap
  • Xpeng G7 purple wrap
  • Xpeng G7 pink wrap
  • Xpeng G7 teal wrap
  • Xpeng G7 brown wrap
  • Xpeng G7 gold wrap
  • Xpeng G7 chrome wrap
  • Xpeng G7 color shift wrap
  • Xpeng G7 carbon fiber wrap
  • Xpeng G7 camo and patterned wrap

How much vinyl to wrap a Xpeng G7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowSUV (5 doors)192.6 in (4,892 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Xpeng G7 wrap cost factors

Xpeng G7 wrap cost depends on the size of the vehicle, the film you choose, and the amount of labor. This SUV is 192.6 in (4,892 mm) long, which means more material than a smaller car. A full wrap of the newest body takes about 66 ft (20 m) of cast film, or about 74 ft (22.5 m) for chrome or patterned film. Added work on the tailgate glass edge and the separate charge port door also affects the labor.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Xpeng G7 wraps by generation

Swipe sideways. Tap a card for the full description.

Xpeng G7, first generation, factory photo
Factory color shown

2025–now Xpeng G7 SUV (first generation)

2025–nowSUV (5 doors)192.6 in (4,892 mm)

The first generation Xpeng G7 is a large five-door SUV, and that size sets the amount of film and the number of panels. The body is 192.6 in (4,892 mm) long, so a full wrap needs about 66 ft (20 m) of 60-inch film. You wrap the tailgate as one big panel, but the film ends at the edge of the rear glass. The four doors, hood, roof, and bumpers add up to a standard panel count for a large SUV.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Xpeng G7

A partial wrap on a Xpeng G7 can cover the roof, hood, or mirror caps without wrapping the whole car. A Xpeng G7 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film you can put on the front end to protect it from stone chips. These smaller jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng G7: body, cut-outs and film

A Xpeng G7 vinyl wrap covers a large SUV body that is 192.6 in (4,892 mm) long. The five-door layout means the tailgate is a big single panel, while the four side doors add four more large panels. The roof, hood, front and rear bumpers, and the front fenders make up the rest of the wrap. This body uses less film than a full-size van but more than a small crossover.

Xpeng G7 wrap ideas often start with a color change on the large side panels and the tailgate. The tailgate has the rear glass built into it, so the film ends at the edge of the glass. The electric car's charge port door is wrapped as a small piece of its own. You can also add paint protection film (PPF) on the front end or a chrome delete (bright trim covered with black film) on the window trim and badges.

How much vinyl to wrap a Xpeng G7 depends on the generation you are working on. This page covers the first generation Xpeng G7, produced from 2025 to the present. If you count film for this body, plan on about 66 ft (20 m) of cast film for a full wrap. Since there is only one generation in the catalog, those figures stay the same for every 2025–now Xpeng G7.

Questions about wrapping a Xpeng G7

How much vinyl does it take to wrap a Xpeng G7?

A full wrap of a Xpeng G7 takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. That figure is for the first generation body, which is the only generation in the catalog. If you use chrome or patterned film, the amount rises to about 74 ft (22.5 m).

Can I wrap only the hood or the roof of a Xpeng G7?

Yes, you can wrap only the hood or the roof of a Xpeng G7. A partial wrap on this car often covers the roof, hood, or mirror caps. You can also do a chrome delete on the window trim and badges. Those jobs use less film than a full wrap.

Is a Xpeng G7 hard to wrap?

The Xpeng G7 is not especially hard to wrap, but its size and a few details add work. The tailgate has the rear glass in it, so the film must end cleanly at the edge of the glass. The charge port door is wrapped as a small piece of its own. With a body 192.6 in (4,892 mm) long, you need to handle large panels carefully.

How many generations of the Xpeng G7 does this page cover?

This page covers one generation of the Xpeng G7. The first generation is produced from 2025 to the present. There is only one body in the catalog for this model.