Wraps by car

Xpeng P5 wrap

The Xpeng P5 wrap page covers the mid-size sedan sold since 2021 and this first generation is the only body this catalog lists. A full vinyl wrap of a Xpeng P5 takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, while chrome or patterned film uses about 69 ft (21 m). The car is 189.3 in (4,808 mm) long and has four doors.

1generations18 mof film for a full wrap

Xpeng P5, first generation, factory photo
Xpeng P5, first generation. Factory color shown.

Xpeng P5 wrap colors and ideas

  • Xpeng P5 black wrap
  • Xpeng P5 white wrap
  • Xpeng P5 gray wrap
  • Xpeng P5 silver wrap
  • Xpeng P5 red wrap
  • Xpeng P5 blue wrap
  • Xpeng P5 green wrap
  • Xpeng P5 yellow wrap
  • Xpeng P5 orange wrap
  • Xpeng P5 purple wrap
  • Xpeng P5 pink wrap
  • Xpeng P5 teal wrap
  • Xpeng P5 brown wrap
  • Xpeng P5 gold wrap
  • Xpeng P5 chrome wrap
  • Xpeng P5 color shift wrap
  • Xpeng P5 carbon fiber wrap
  • Xpeng P5 camo and patterned wrap

How much vinyl to wrap a Xpeng P5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowsedan (4 doors)189.3 in (4,808 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Xpeng P5 wrap cost factors

The Xpeng P5 wrap cost depends on the size of the mid-size sedan, the number of panels and the film an owner chooses. A full wrap of the 189.3 in (4,808 mm) body uses about 59 ft (18 m) of standard cast film, while chrome or patterned film takes about 69 ft (21 m). Partial jobs like the roof or hood use less film and less labor than the full body.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

Xpeng P5 wraps by generation

Swipe sideways. Tap a card for the full description.

Xpeng P5, first generation, factory photo
Factory color shown

2021–now Xpeng P5 sedan (first generation)

2021–nowsedan (4 doors)189.3 in (4,808 mm)

The first generation Xpeng P5 is a four-door sedan that measures 189.3 in (4,808 mm) in length. A body of this size uses about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full color change wrap. The four doors and the trunk add panels to the job compared with a hatchback of similar length.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Xpeng P5

An owner can choose a partial wrap on a Xpeng P5 for the roof, hood or mirror caps instead of the whole body. A chrome delete on this car covers the window trim and badges with black film, and paint protection film (PPF) can be applied as clear film on the front end. Each of those jobs is smaller than a full wrap and uses only the film needed for those panels.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng P5: body, cut-outs and film

A Xpeng P5 vinyl wrap follows the lines of a four-door sedan body that is 189.3 in (4,808 mm) long. The sedan shape means the roof, hood, trunk and four door panels are the main flat areas a wrap installer works with. A mid-size sedan of this length fits on standard 60-inch (1.52 m) rolls with less waste than a taller vehicle.

For Xpeng P5 wrap ideas, the body has few areas that need special treatment beyond normal sedan panels. The charge port door is wrapped as a small piece of its own because this is an electric car, and that piece is cut and applied separately. Door handles, badges and mirror caps are the usual parts an installer removes or masks before applying film.

To work out how much vinyl to wrap a Xpeng P5, an installer counts on the only body this page covers being the first generation sold from 2021. The 2021–now sedan is listed as one generation, so there is no older or newer body to compare when measuring film. The film estimate of about 59 ft (18 m) applies to every Xpeng P5 you would find in a catalog today.

Questions about wrapping a Xpeng P5

How much vinyl does it take to wrap a Xpeng P5?

A Xpeng P5 takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap, or about 69 ft (21 m) if you use chrome or patterned film. The estimate comes from the first generation mid-size sedan body that is 189.3 in (4,808 mm) long.

Can I wrap only the hood or the roof of a Xpeng P5?

Yes, you can wrap only the hood or the roof of a Xpeng P5. A partial wrap on this car can cover the roof, hood or mirror caps, or you can do a chrome delete on the window trim and badges.

Is a Xpeng P5 hard to wrap?

A Xpeng P5 is not hard to wrap for an installer who works on electric cars, but the charge port door adds one small piece to the job. The sedan body is 189.3 in (4,808 mm) long and has four doors, so the number of panels is typical for a mid-size car.

How many generations of the Xpeng P5 does this page cover?

This page covers one generation of the Xpeng P5, the first generation sold from 2021 to now. The catalog lists no other body for this model.