Wraps by car

Xpeng P7 wrap

This page covers the Xpeng P7 wrap across two generations, the first from 2019 and the second from 2025. The second generation is a 197.5 in (5,017 mm) liftback, while the first generation is a 192.4 in (4,888 mm) sedan. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations18 mof film for a full wrap

Xpeng P7, second generation, factory photo
Xpeng P7, second generation. Factory color shown.

Xpeng P7 wrap colors and ideas

  • Xpeng P7 black wrap
  • Xpeng P7 white wrap
  • Xpeng P7 gray wrap
  • Xpeng P7 silver wrap
  • Xpeng P7 red wrap
  • Xpeng P7 blue wrap
  • Xpeng P7 green wrap
  • Xpeng P7 yellow wrap
  • Xpeng P7 orange wrap
  • Xpeng P7 purple wrap
  • Xpeng P7 pink wrap
  • Xpeng P7 teal wrap
  • Xpeng P7 brown wrap
  • Xpeng P7 gold wrap
  • Xpeng P7 chrome wrap
  • Xpeng P7 color shift wrap
  • Xpeng P7 carbon fiber wrap
  • Xpeng P7 camo and patterned wrap

How much vinyl to wrap a Xpeng P7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2025–nowliftback (5 doors)197.5 in (5,017 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)
2019–nowsedan (4 doors)192.4 in (4,888 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Xpeng P7 wrap cost factors

The Xpeng P7 wrap cost depends on the size of the car and the film used. The second generation is larger at 197.5 in (5,017 mm), so it uses more material than the 192.4 in (4,888 mm) first generation. Chrome or patterned film needs about 76 ft (23 m) for the second generation and about 62 ft (19 m) for the first generation, which adds to the cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Xpeng P7 wraps by generation

Swipe sideways. Tap a card for the full description.

Xpeng P7, second generation, factory photo
Factory color shown

2025–now Xpeng P7 liftback (second generation)

2025–nowliftback (5 doors)197.5 in (5,017 mm)

The second generation Xpeng P7 is a liftback with five doors and a length of 197.5 in (5,017 mm). The extra doors and tailgate mean more panels and edges to wrap carefully. The rear glass is in the tailgate, so the film ends at the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Xpeng P7, first generation, factory photo
Factory color shown

2019–now Xpeng P7 sedan (first generation)

2019–nowsedan (4 doors)192.4 in (4,888 mm)

The first generation Xpeng P7 has a panoramic glass roof on every trim. The glass is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails, which leaves a clean line between the wrapped body and the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has flush door handles: each handle is wrapped as a small piece of its own.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Xpeng P7

A partial wrap on a Xpeng P7 can cover the roof, hood, or mirror caps. Xpeng P7 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to protect against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng P7: body, cut-outs and film

The Xpeng P7 vinyl wrap job depends on its body style and size. The second generation's liftback has five doors and a longer body, so it needs more film and more panels than the first generation's four-door sedan. The precision cutting around the tailgate glass and flush handles adds time to the installation.

Xpeng P7 wrap ideas start with the parts that need cut-outs or come off. The electric charge port door is wrapped as a small piece of its own on both generations. The first generation has a panoramic glass roof on every trim, so the film ends at the roof rails, and flush door handles each get a small piece of film. Parking sensors and cameras in the bumpers and body are cut around carefully.

If you are counting how much vinyl to wrap a Xpeng P7, the generations differ. The first generation needs about 52 ft (16 m) of 60-inch cast film, while the second generation needs about 59 ft (18 m). The 2023 restyling of the first generation did not change its length, so the film estimate stays the same for later cars.

Questions about wrapping a Xpeng P7

How much vinyl does it take to wrap a Xpeng P7?

It takes about 59 ft (18 m) of 60-inch (1.52 m) cast film to wrap the newest Xpeng P7. That figure is for the second generation liftback, which is longer and has more panels than the first generation.

Can I wrap only the hood or the roof of a Xpeng P7?

Yes, you can wrap only the hood or the roof of a Xpeng P7. The partial wrap options listed are the roof, hood, and mirror caps, so any single panel is possible. A chrome delete is also a smaller job that covers the window trim and badges.

Is a Xpeng P7 hard to wrap?

A Xpeng P7 is not the easiest car to wrap because of its size and details. The flush door handles need to be wrapped as small pieces, and the charge port door is wrapped separately. Parking sensors, cameras, and the glass roof add cut-out work, especially on the first generation.

How many generations of the Xpeng P7 does this page cover?

This page covers two generations of the Xpeng P7. The first generation has been produced since 2019, and the second generation started in 2025.