Wraps by car

Xpeng X9 wrap

The Xpeng X9 wrap page covers the first generation of this electric minivan, produced from 2023 onward. A full vinyl wrap of the current body takes about 79 ft (24 m) of 60-inch (1.52 m) cast film. Chrome or patterned film work needs roughly 94 ft (28.5 m) due to the extra material around trim and details. The car is a tall five-door van that offers a large continuous surface for a color change.

1generations24 mof film for a full wrap

Xpeng X9 wrap colors and ideas

  • Xpeng X9 black wrap
  • Xpeng X9 white wrap
  • Xpeng X9 gray wrap
  • Xpeng X9 silver wrap
  • Xpeng X9 red wrap
  • Xpeng X9 blue wrap
  • Xpeng X9 green wrap
  • Xpeng X9 yellow wrap
  • Xpeng X9 orange wrap
  • Xpeng X9 purple wrap
  • Xpeng X9 pink wrap
  • Xpeng X9 teal wrap
  • Xpeng X9 brown wrap
  • Xpeng X9 gold wrap
  • Xpeng X9 chrome wrap
  • Xpeng X9 color shift wrap
  • Xpeng X9 carbon fiber wrap
  • Xpeng X9 camo and patterned wrap

How much vinyl to wrap a Xpeng X9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowvan (5 doors)208.7 in (5,300 mm) to 209.3 in (5,316 mm)about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m)

Xpeng X9 wrap cost factors

The Xpeng X9 wrap cost depends on the size of the body, which runs 208.7 in (5,300 mm) to 209.3 in (5,316 mm) long and 70.3 in (1,785 mm) tall. A full wrap takes about 79 ft (24 m) of 60-inch (1.52 m) cast film, while chrome or patterned film takes about 94 ft (28.5 m). The sliding door tracks and charge port door add trim and cutting time. The roof height often requires a platform, which affects labor.

  • Film for a full wrap: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • A tall body (70.3 in (1,785 mm)): the roof is wrapped from a platform.
  • Restyled in 2026: bumpers and lights differ between the versions, and so do the film cuts.

Xpeng X9 wraps by generation

Swipe sideways. Tap a card for the full description.

2023–now Xpeng X9 van (first generation)

2023–nowvan (5 doors)208.7 in (5,300 mm) to 209.3 in (5,316 mm)

The first generation Xpeng X9 is a five-door electric minivan built from 2023 onward, with a restyling in 2026. The sliding side doors have tracks that stay bare, so the film is cut along those lines and the door panels are wrapped separately. The body length ranges from 208.7 in (5,300 mm) to 209.3 in (5,316 mm), which affects how much material each side takes. The tall body means the roof wrap is done from a platform.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Electric car: the charge port door is wrapped as a small piece of its own.

A tall body (70.3 in (1,785 mm)): the roof is wrapped from a platform.

Film: about 79 ft (24 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m).

Roof, hood, chrome delete and PPF on a Xpeng X9

An Xpeng X9 chrome delete covers the window trim and badges with black film, leaving the painted panels alone. A partial wrap on this minivan can include the roof, hood, and mirror caps, which is a smaller job than a full color change. Paint protection film (PPF) is often applied as a clear film on the front end to guard the hood, bumper, and fenders. The sliding door tracks and charge port door do not need film for these smaller jobs.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng X9: body, cut-outs and film

An Xpeng X9 vinyl wrap covers a long, tall minivan body from 208.7 in (5,300 mm) to 209.3 in (5,316 mm) depending on trim. The five-door van shape includes a large roof, long side panels, and a front end with a charge port door. The 70.3 in (1,785 mm) height means the roof must be wrapped from a platform or step. The sliding side doors have tracks that stay bare and guide where the film is cut.

Xpeng X9 wrap ideas start with the sliding side doors, because the door tracks remain bare and the film is trimmed along their edges. The electric charge port door is wrapped as a small separate piece so it can still open cleanly. The tall body makes the roof a job for a platform or a second installer. Door handles, mirrors, and the front bumper may be removed or wrapped with careful relief cuts.

To know how much vinyl to wrap a Xpeng X9, measure the first generation body from 208.7 in (5,300 mm) to 209.3 in (5,316 mm). The roof, sides, hood, and rear hatch of the minivan take close to 79 ft (24 m) of 60-inch (1.52 m) cast film for a single-color wrap. A chrome or patterned film job uses about 94 ft (28.5 m) because the extra material is needed for aligned details and trim coverage. The 2026 restyling may change bumper and light shapes, which can alter how film is cut.

Questions about wrapping a Xpeng X9

How much vinyl does it take to wrap a Xpeng X9?

A full Xpeng X9 wrap takes about 79 ft (24 m) of 60-inch (1.52 m) cast vinyl for the standard film estimate. Chrome or patterned film jobs need about 94 ft (28.5 m) of material. These figures cover the newest body of the first generation, which is 208.7 in (5,300 mm) to 209.3 in (5,316 mm) long.

Are the sliding doors of a Xpeng X9 wrapped?

Yes, the sliding doors of a Xpeng X9 are wrapped, but the tracks stay bare. The film is cut along the door tracks so the doors can still slide without rubbing. The rest of the door panel is covered like any other panel.

Which years of the Xpeng X9 take the same film cuts?

The Xpeng X9 has one generation so far, produced from 2023 onward. The 2026 restyling may change the film cuts for bumpers or lights, but the basic panels remain the same. All years of the first generation take the same general film templates.

Can I wrap only the hood or the roof of a Xpeng X9?

Yes, you can wrap only the hood or the roof of a Xpeng X9 as a partial job. The roof is tall and needs a platform, but it is a single large panel. The hood is also a straightforward panel for a color change or paint protection film.