Wraps by car

Xpeng G3i wrap

The Xpeng G3i wrap guide covers the first generation SUV from 2022 to now. A full vinyl wrap of this five-door body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. The catalog has one generation, so every panel estimate on this page suits the current G3i body.

1generations18 mof film for a full wrap

Xpeng G3i, first generation, factory photo
Xpeng G3i, first generation. Factory color shown.

Xpeng G3i wrap colors and ideas

  • Xpeng G3i black wrap
  • Xpeng G3i white wrap
  • Xpeng G3i gray wrap
  • Xpeng G3i silver wrap
  • Xpeng G3i red wrap
  • Xpeng G3i blue wrap
  • Xpeng G3i green wrap
  • Xpeng G3i yellow wrap
  • Xpeng G3i orange wrap
  • Xpeng G3i purple wrap
  • Xpeng G3i pink wrap
  • Xpeng G3i teal wrap
  • Xpeng G3i brown wrap
  • Xpeng G3i gold wrap
  • Xpeng G3i chrome wrap
  • Xpeng G3i color shift wrap
  • Xpeng G3i carbon fiber wrap
  • Xpeng G3i camo and patterned wrap

How much vinyl to wrap a Xpeng G3i

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)177.0 in (4,495 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Xpeng G3i wrap cost factors

The Xpeng G3i wrap cost depends on the film type, the number of panels and the amount of detail work. A full color change takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, while chrome or patterned film raises the material to about 67 ft (20.5 m). The tailgate and charge port door each add a small separate piece, which influences the labor part of the cost.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Xpeng G3i wraps by generation

Swipe sideways. Tap a card for the full description.

Xpeng G3i, first generation, factory photo
Factory color shown

2022–now Xpeng G3i SUV (first generation)

2022–nowSUV (5 doors)177.0 in (4,495 mm)

The first generation Xpeng G3i is a five-door SUV with a 177.0 in (4,495 mm) body. That length and body style mean a full wrap uses about 59 ft (18 m) of 60-inch (1.52 m) film and touches around 12 main panels. The tailgate works as one large panel with the film stopping at the glass edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Xpeng G3i

A partial wrap on a Xpeng G3i can cover the roof, hood or mirror caps without a full body job. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard the leading edges from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng G3i: body, cut-outs and film

The Xpeng G3i vinyl wrap follows a five-door SUV body that is 177.0 in (4,495 mm) long. The size means a full wrap needs about 59 ft (18 m) of 60-inch (1.52 m) cast film, with the roof and pillars included. Because the rear glass is part of the tailgate, the film ends at the edge of the glass instead of wrapping around it.

Xpeng G3i wrap ideas should account for its electric charge port door, which is wrapped as a small piece of its own. The tailgate film ends at the edge of the rear glass. A wrap that covers the roof and pillars gives a two-tone look without touching the charge port.

To work out how much vinyl to wrap a Xpeng G3i you only need one generation: the 2022–now body. The five-door SUV takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a standard color change. If you choose chrome or patterned film the estimate rises to about 67 ft (20.5 m) because of extra material for matching.

Questions about wrapping a Xpeng G3i

How much vinyl does it take to wrap a Xpeng G3i?

A Xpeng G3i needs about 59 ft (18 m) of 60-inch (1.52 m) cast film for a full wrap. If you pick chrome or patterned film the estimate goes up to about 67 ft (20.5 m). The tailgate and charge port are wrapped as separate pieces, which is already included in these figures.

Can I wrap only the hood or the roof of a Xpeng G3i?

Yes, you can wrap only the hood or the roof of a Xpeng G3i. A partial wrap on the roof, hood or mirror caps is a smaller job than a full wrap. The roof section works well for a gloss black or contrasting color on this SUV.

Is a Xpeng G3i hard to wrap?

The Xpeng G3i is not a hard wrap, but it has details that add time. The tailgate with the rear glass in it means the film ends at the edge of the glass instead of wrapping into a gap. The charge port door is a small separate piece on an electric car, so it needs its own cut and alignment.

How many generations of the Xpeng G3i does this page cover?

This page covers one generation of the Xpeng G3i, from 2022 to the present. The single body style is a five-door SUV with the same panel sizes across that generation.