Wraps by car

Xpeng G6 wrap

This page covers a Xpeng G6 wrap, including vinyl wrap options and film needs for the first generation SUV. The Xpeng G6 has one generation in catalog, produced from 2023 to now with a restyle in 2025. A full wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 62 ft (19 m).

1generations16.5 mof film for a full wrap

Xpeng G6, first generation, factory photo
Xpeng G6, first generation. Factory color shown.

Xpeng G6 wrap colors and ideas

  • Xpeng G6 black wrap
  • Xpeng G6 white wrap
  • Xpeng G6 gray wrap
  • Xpeng G6 silver wrap
  • Xpeng G6 red wrap
  • Xpeng G6 blue wrap
  • Xpeng G6 green wrap
  • Xpeng G6 yellow wrap
  • Xpeng G6 orange wrap
  • Xpeng G6 purple wrap
  • Xpeng G6 pink wrap
  • Xpeng G6 teal wrap
  • Xpeng G6 brown wrap
  • Xpeng G6 gold wrap
  • Xpeng G6 chrome wrap
  • Xpeng G6 color shift wrap
  • Xpeng G6 carbon fiber wrap
  • Xpeng G6 camo and patterned wrap

How much vinyl to wrap a Xpeng G6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)187.1 in (4,753 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)

Xpeng G6 wrap cost factors

Xpeng G6 wrap cost depends on film type, wrap coverage, and the car's details. A full wrap of this 187.1 in (4,753 mm) SUV uses about 54 ft (16.5 m) of cast film or 62 ft (19 m) of chrome or patterned film. Cut-outs for sensors, cameras, and flush handles add labor time. Partial wraps like a hood or chrome delete use less material and lower the cost.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have flush door handles: each handle is wrapped as a small piece of its own.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have a tow hitch: a cut-out in the rear bumper film.
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2025: bumpers and lights differ between the versions, and so do the film cuts.

Xpeng G6 wraps by generation

Swipe sideways. Tap a card for the full description.

Xpeng G6, first generation, factory photo
Factory color shown

2023–now Xpeng G6 SUV (first generation)

2023–nowSUV (5 doors)187.1 in (4,753 mm)

The first generation Xpeng G6 has a panoramic glass roof on every trim, so the roof is not wrapped. The film ends at the roof rails, leaving the glass dark against any film color. This means you cannot change the roof color with a wrap. The glass roof is a fixed part of the design from 2023 onward.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have flush door handles: each handle is wrapped as a small piece of its own.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have a tow hitch: a cut-out in the rear bumper film.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Xpeng G6

For the Xpeng G6, a partial wrap can cover the hood, mirror caps, or tailgate. A chrome delete on this car means covering the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. Each job uses much less film than a full wrap.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng G6: body, cut-outs and film

A Xpeng G6 vinyl wrap is measured for its SUV body, which is 187.1 in (4,753 mm) long with five doors. The size means a full wrap uses about 54 ft (16.5 m) of 60-inch (1.52 m) film. You can wrap the tailgate as one piece, but the rear glass is not covered so the film ends at its edge. The wrap covers all painted panels, leaving glass and lights clear.

Xpeng G6 wrap ideas start with the details that need careful trimming on this electric SUV. Every trim has a panoramic glass roof, so the film ends at the roof rails and the glass stays unwrapped. Some trims have flush door handles and parking sensors, so each handle is wrapped as a small piece and film is cut around each sensor. Cameras in the body and a possible tow hitch also need cut-outs.

To know how much vinyl to wrap a Xpeng G6, compare the first generation from 2023 to now and its 2025 restyle. The body length stays 187.1 in (4,753 mm) across these years, so film needs remain about 54 ft (16.5 m). The restyle may change bumper shapes slightly, but the roof and glass area are the same. Always measure your exact car before ordering film.

Questions about wrapping a Xpeng G6

How much vinyl does it take to wrap a Xpeng G6?

A full wrap of a Xpeng G6 takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, you need about 62 ft (19 m). These figures are for the newest body of the first generation, which is 187.1 in (4,753 mm) long.

Can the roof of a Xpeng G6 be wrapped?

No, the roof of a Xpeng G6 cannot be wrapped because every trim has a panoramic glass roof. The film ends at the roof rails, so the glass stays its original dark color. Only the painted roof rails can be covered.

Which years of the Xpeng G6 take the same film cuts?

All years of the Xpeng G6 from 2023 to now take the same film cuts, with one note: the restyle in 2025 may change bumper details. The body dimensions are unchanged, so film quantities stay the same. Always check the exact bumper shape of your car before cutting.

Can I wrap only the hood or the roof of a Xpeng G6?

Yes, the Xpeng G6 offers partial wrap options such as hood, mirror caps, and tailgate. You can also do a chrome delete on the window trim and badges, or apply clear paint protection film (PPF) to the front end. These jobs use less film than a full wrap.