Wraps by car

Xpeng P7+ wrap

The Xpeng P7+ wrap is a full vinyl wrap for the first generation liftback. This catalog page covers one generation of the P7+. A full wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

1generations20.5 mof film for a full wrap

Xpeng P7+, first generation, factory photo
Xpeng P7+, first generation. Factory color shown.

Xpeng P7+ wrap colors and ideas

  • P7+ black wrap
  • P7+ white wrap
  • P7+ gray wrap
  • P7+ silver wrap
  • P7+ red wrap
  • P7+ blue wrap
  • P7+ green wrap
  • P7+ yellow wrap
  • P7+ orange wrap
  • P7+ purple wrap
  • P7+ pink wrap
  • P7+ teal wrap
  • P7+ brown wrap
  • P7+ gold wrap
  • P7+ chrome wrap
  • P7+ color shift wrap
  • P7+ carbon fiber wrap
  • P7+ camo and patterned wrap

How much vinyl to wrap a Xpeng P7+

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2026–nowliftback (5 doors)199.6 in (5,071 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m)

P7+ wrap cost factors

P7+ wrap cost depends on the film type, the wrap coverage, and the prep work for a car 199.6 in (5,071 mm) long. A full-wrap quote starts from the film area of about 67 ft (20.5 m) for standard cast film. Partial wraps, chrome delete, or paint protection film on the front end change the material and labor. The shop measures your car before quoting, so the final number reflects the exact P7+ you bring.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

P7+ wraps by generation

Swipe sideways. Tap a card for the full description.

Xpeng P7+, first generation, factory photo
Factory color shown

2026–now P7+ liftback (first generation)

2026–nowliftback (5 doors)199.6 in (5,071 mm)

The first generation P7+ is a five-door liftback that measures 199.6 in (5,071 mm) long. That size means a full wrap uses about 67 ft (20.5 m) of standard cast film. The wrap is applied to large panels like the roof and hood, plus the doors and rear quarters. The tailgate includes the rear glass, so the film ends at its edge.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 76 ft (23 m).

Roof, hood, chrome delete and PPF on a P7+

A partial wrap on the P7+ can cover the roof, hood, or mirror caps, while a chrome delete covers window trim and badges. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. The P7+ chrome delete uses black film over the bright trim for a different look without a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Xpeng P7+: body, cut-outs and film

The Xpeng P7+ vinyl wrap covers a large liftback body at 199.6 in (5,071 mm) long. With five doors, the film must cover the roof, hood, fenders, doors, and rear quarters. That size means a full wrap uses about 67 ft (20.5 m) of standard cast film. The single body style keeps panel count and layout the same for all P7+ cars.

P7+ wrap ideas start with the tailgate glass edge, where the film ends cleanly at the glass. The charge port door is wrapped as a small separate piece, so it can be opened without stress. The mirror caps, door handles, and badges can be removed or wrapped in place depending on the finish you want. For a two-tone look, the roof panel can be wrapped in a contrasting color.

How much vinyl to wrap a P7+ depends on the film type, with about 67 ft (20.5 m) of standard cast film for a full wrap. Chrome or patterned film needs more material, about 76 ft (23 m), because of pattern matching and waste. The single generation in this catalog has one body style, so the amount does not change between years.

Questions about wrapping a Xpeng P7+

How much vinyl does it take to wrap a Xpeng P7+?

A full wrap takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a Xpeng P7+. If you choose chrome or patterned film, the amount rises to about 76 ft (23 m) to allow for matching.

Can I wrap only the hood or the roof of a P7+?

Yes, you can wrap only the hood or the roof of a P7+. Partial wrap jobs on this car often include the roof, hood, or mirror caps as separate panels.

Is a P7+ hard to wrap?

A P7+ adds work because the tailgate glass means the film must end at the glass edge, and the charge port door is wrapped as its own small piece. The car's 199.6 in (5,071 mm) length also means large panels that need careful handling.

How many generations of the P7+ does this page cover?

This page covers one generation of the P7+, the first generation sold from 2026 onward.