Every Mix wrapped in gray starts with a finish and not a brand because no two films feel the same on this upright body. A flat matte reads as soft and cloth-like, a satin reads as cool and dry, and a gloss reads as painted and deep under streetlights. The second decision is the film itself because budget lines and premium lines lay down differently over the door tracks and the roof. Gray is a true color change on the Mix when it is far from the original tone, while a tone close to factory paint reads as a refresh instead.

Factory paint can stay under the wrap and be revealed later because the film is removable without a repaint. The film does not merge with the paint, so inspectors and buyers can still read the original code under the hood. The seams show the most on a tall van body when the light is low, because a 60-inch roll has to be joined on the roof and the rear corners. A gloss gray with high clarity makes the seams quieter than a heavy metallic, which catches light along each cut line.

Removable film on the Mix is not a lifetime layer and can be taken off by a skilled hand without pulling clear coat. Hand wash is the safe routine for the wrap, with a soft mitt and a pH-neutral soap instead of a brush tunnel. The electric charge port door is wrapped as a small piece of its own, so it can be worked without stretching the film off the surrounding panel. A satin or matte gray should be dried with a microfiber towel in straight lines, because circular wiping can leave a faint map on the surface.