Wraps by car

Zibar MK2 wrap

Zibar MK2 wrap pages cover this full-size SUV built from 2010 to now, one generation, and a full vinyl wrap of the newest body takes about 76 ft (23 m) of 60-inch (1.52 m) cast film. The MK2 is a four-door SUV with a long 207.9 in (5,280 mm) body and a tall roof at 74.8 in (1,900 mm). This guide explains film quantities, wrap ideas, and the work involved.

1generations23 mof film for a full wrap

Zibar MK2, first generation, factory photo
Zibar MK2, first generation. Factory color shown.

Zibar MK2 wrap colors and ideas

  • Zibar MK2 black wrap
  • Zibar MK2 white wrap
  • Zibar MK2 gray wrap
  • Zibar MK2 silver wrap
  • Zibar MK2 red wrap
  • Zibar MK2 blue wrap
  • Zibar MK2 green wrap
  • Zibar MK2 yellow wrap
  • Zibar MK2 orange wrap
  • Zibar MK2 purple wrap
  • Zibar MK2 pink wrap
  • Zibar MK2 teal wrap
  • Zibar MK2 brown wrap
  • Zibar MK2 gold wrap
  • Zibar MK2 chrome wrap
  • Zibar MK2 color shift wrap
  • Zibar MK2 carbon fiber wrap
  • Zibar MK2 camo and patterned wrap

How much vinyl to wrap a Zibar MK2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–nowSUV (4 doors)207.9 in (5,280 mm)about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m)

Zibar MK2 wrap cost factors

Zibar MK2 wrap cost depends on the size of this large SUV, the film type, and the labor for its height. A full wrap needs about 76 ft (23 m) of 60-inch (1.52 m) cast film, while chrome or patterned film requires about 94 ft (28.5 m). The tall body, 74.8 in (1,900 mm), adds time because the roof is wrapped from a platform. The tailgate with rear glass also affects cutting and finishing work.

  • Film for a full wrap: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m).
  • Body: SUV (4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.

Zibar MK2 wraps by generation

Swipe sideways. Tap a card for the full description.

Zibar MK2, first generation, factory photo
Factory color shown

2010–now Zibar MK2 SUV (first generation)

2010–nowSUV (4 doors)207.9 in (5,280 mm)

The first generation Zibar MK2 is a tall SUV, so the roof is wrapped from a platform and takes more time. This body has a tailgate with the rear glass in it, where the film ends at the edge of the glass. The height is 74.8 in (1,900 mm), which makes upper panels harder to reach. It has been produced from 2010 to now.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.8 in (1,900 mm)): the roof is wrapped from a platform.

Film: about 76 ft (23 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 94 ft (28.5 m).

Roof, hood, chrome delete and PPF on a Zibar MK2

Partial wrap options for the Zibar MK2 include the roof, hood, and mirror caps, plus chrome delete on window trim and badges. Paint protection film (PPF) is clear film applied to the front end for protection. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Zibar MK2: body, cut-outs and film

Zibar MK2 vinyl wrap work is shaped by the body style and size of this four-door SUV. The vehicle is 207.9 in (5,280 mm) long and 74.8 in (1,900 mm) tall, so large panels need wide film. A full wrap uses about 76 ft (23 m) of 60-inch (1.52 m) cast film, while the roof requires extra time from a platform.

Zibar MK2 wrap ideas should account for the tailgate with rear glass in it, where the film ends at the edge of the glass. The tall body also means the roof is wrapped from a platform, so plan for that step. Removing the rear glass or trim around it is not needed, but the tailgate surface is split by the window. For chrome or patterned film, estimate about 94 ft (28.5 m) of 60-inch (1.52 m) film.

How much vinyl to wrap a Zibar MK2 depends on the generation, and this page covers the first generation from 2010 to now. The size remains consistent, so the same quantities apply across those years. A full wrap takes about 76 ft (23 m) of cast film, and chrome or patterned film needs about 94 ft (28.5 m).

Questions about wrapping a Zibar MK2

How much vinyl does it take to wrap a Zibar MK2?

A Zibar MK2 takes about 76 ft (23 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, the amount is about 94 ft (28.5 m) of the same width. These figures are for the newest body style.

Can I wrap only the hood or the roof of a Zibar MK2?

Yes, you can wrap only the hood or the roof of a Zibar MK2. Partial wrap options include the roof, hood, and mirror caps. The roof is tall, so it requires a platform, but it can be done separately.

Is a Zibar MK2 hard to wrap?

A Zibar MK2 is moderately hard to wrap because of its size and tall body. The roof is 74.8 in (1,900 mm) high and is wrapped from a platform, adding time. The tailgate has rear glass in it, so the film ends at the edge of the glass, requiring precise cutting. The vehicle is 207.9 in (5,280 mm) long, meaning large panels need careful handling.

How many generations of the Zibar MK2 does this page cover?

This page covers one generation of the Zibar MK2, the first generation, produced from 2010 to now. There are no other generations in the catalog. The information here applies to that generation.