Wraps by car

Zibar ZD wrap

The Zibar ZD wrap guide covers this compact open-top SUV, produced from 2020 onward in a single generation. A full vinyl wrap of the Zibar ZD takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the need to about 52 ft (16 m). The car is 157.5 in (4,000 mm) long overall.

1generations12 mof film for a full wrap

Zibar ZD, first generation, factory photo
Zibar ZD, first generation. Factory color shown.

Zibar ZD wrap colors and ideas

  • Zibar ZD black wrap
  • Zibar ZD white wrap
  • Zibar ZD gray wrap
  • Zibar ZD silver wrap
  • Zibar ZD red wrap
  • Zibar ZD blue wrap
  • Zibar ZD green wrap
  • Zibar ZD yellow wrap
  • Zibar ZD orange wrap
  • Zibar ZD purple wrap
  • Zibar ZD pink wrap
  • Zibar ZD teal wrap
  • Zibar ZD brown wrap
  • Zibar ZD gold wrap
  • Zibar ZD chrome wrap
  • Zibar ZD color shift wrap
  • Zibar ZD carbon fiber wrap
  • Zibar ZD camo and patterned wrap

How much vinyl to wrap a Zibar ZD

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowopen-top SUV157.5 in (4,000 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Zibar ZD wrap cost factors

The Zibar ZD wrap cost depends on the area covered, the film type, and the labor for the top and glass areas. A full wrap uses about 39 ft (12 m) of cast film, but a chrome delete uses a narrower film with more waste. The tailgate glass and the top edges add time, so the final figure reflects those cut-outs. The single body style means no cost difference between years.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: open-top SUV.
  • Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Zibar ZD wraps by generation

Swipe sideways. Tap a card for the full description.

Zibar ZD, first generation, factory photo
Factory color shown

2020–now Zibar ZD open-top SUV (first generation)

2020–nowopen-top SUV157.5 in (4,000 mm)

The first generation Zibar ZD has an open top that is not wrapped when the car has a fabric roof. The film ends where the fabric begins, so the upper body line is a natural stop point. If the car has a folding hard top, that top is wrapped as panels of its own. The same rule applies to every ZD from 2020 to now.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Zibar ZD

A partial wrap on a Zibar ZD covers the hood, mirror caps, or tailgate without wrapping the whole car. A chrome delete (bright trim covered with black film) handles the window trim and badges. Paint protection film (PPF) is clear film on the front end to shield the nose and hood from road debris. Any of these jobs uses less material than a full wrap.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Zibar ZD: body, cut-outs and film

A Zibar ZD vinyl wrap follows the small, upright body of this open-top SUV. The 157.5 in (4,000 mm) length means less film than a full-size truck, but the high sides and exposed top add surface area. The body has only one style, so every Zibar ZD wrap uses the same panel plan. The fabric top is not wrapped, so the film ends where that top begins.

Zibar ZD wrap ideas work around two main areas: the top and the tailgate. A folding hard top, if fitted, is wrapped as separate panels of its own, while a fabric top is left uncovered. The rear tailgate includes the glass, and the film stops at the edge of the glass. The mirrors and door handles are small parts that need careful trimming.

How much vinyl to wrap a Zibar ZD depends on the top type and the film chosen. The open body means no roof panel for a standard color change wrap, reducing the total needed. A chrome delete or patterned film needs about 52 ft (16 m) because of extra material for trim and pattern matching. The first generation has not changed in size since 2020.

Questions about wrapping a Zibar ZD

How much vinyl does it take to wrap a Zibar ZD?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap a Zibar ZD with a standard color change film. Chrome or patterned film raises the total to about 52 ft (16 m). The estimate covers the first generation body from 2020 onward.

Is the top of a Zibar ZD wrapped?

No, the fabric top of a Zibar ZD is not wrapped. The film ends where the fabric begins, at the edge of the top opening. A folding hard top, however, is wrapped as separate panels.

Can I wrap only the hood or the roof of a Zibar ZD?

Yes, you can wrap only the hood or the roof of a Zibar ZD. A partial wrap covers the hood, mirror caps, or tailgate as separate jobs. The roof area is not a separate panel on this open-top car, so the top is not wrapped unless it is a hard top.

Is a Zibar ZD hard to wrap?

A Zibar ZD is not especially hard to wrap, but the open top and tailgate glass add work. The film must be cut cleanly where the fabric top begins and around the tailgate glass. The 157.5 in (4,000 mm) length is compact, so the main panels are manageable.