Wraps by car

BAIC BJ2020 wrap

A BAIC BJ2020 wrap covers the open-top SUV that was produced from 1989 to 2005. The catalog lists one generation of this classic utility vehicle. A full vinyl wrap of the body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 8 ft (2.5 m) to that estimate.

1generations14 mof film for a full wrap

BAIC BJ2020, first generation, factory photo
BAIC BJ2020, first generation. Factory color shown.

BAIC BJ2020 wrap colors and ideas

  • BAIC BJ2020 black wrap
  • BAIC BJ2020 white wrap
  • BAIC BJ2020 gray wrap
  • BAIC BJ2020 silver wrap
  • BAIC BJ2020 red wrap
  • BAIC BJ2020 blue wrap
  • BAIC BJ2020 green wrap
  • BAIC BJ2020 yellow wrap
  • BAIC BJ2020 orange wrap
  • BAIC BJ2020 purple wrap
  • BAIC BJ2020 pink wrap
  • BAIC BJ2020 teal wrap
  • BAIC BJ2020 brown wrap
  • BAIC BJ2020 gold wrap
  • BAIC BJ2020 chrome wrap
  • BAIC BJ2020 color shift wrap
  • BAIC BJ2020 carbon fiber wrap
  • BAIC BJ2020 camo and patterned wrap

How much vinyl to wrap a BAIC BJ2020

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–2005open-top SUV (5 doors)160.2 in (4,070 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

BAIC BJ2020 wrap cost factors

The BAIC BJ2020 wrap cost is set by the size of the body and the film you pick. A body of 160.2 in (4,070 mm) long and 76.4 in (1,940 mm) tall uses about 46 ft (14 m) of cast film. The open top cuts the surface area, but the tall sides add labor with a platform. Chrome or patterned film raises the material amount to about 54 ft (16.5 m).

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: open-top SUV (5 doors).
  • Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (76.4 in (1,940 mm)): the roof is wrapped from a platform.

BAIC BJ2020 wraps by generation

Swipe sideways. Tap a card for the full description.

BAIC BJ2020, first generation, factory photo
Factory color shown

1989–2005 BAIC BJ2020 open-top SUV (first generation)

1989–2005open-top SUV (5 doors)160.2 in (4,070 mm)

The first generation BAIC BJ2020 often has a fabric top that is never wrapped. The film ends where the fabric begins along the body edges. A folding hard top is handled as separate panels and wrapped piece by piece. The tailgate glass is left uncovered and the film is cut at its edge.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (76.4 in (1,940 mm)): the roof is wrapped from a platform.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a BAIC BJ2020

A BAIC BJ2020 chrome delete covers the window trim and badges with black film. A partial wrap on this SUV often includes the hood, mirror caps, and tailgate. Clear paint protection film (PPF) can be applied to the front end. These smaller jobs protect or change the look without wrapping the full body.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BAIC BJ2020: body, cut-outs and film

The BAIC BJ2020 vinyl wrap has to deal with a body that is 160.2 in (4,070 mm) long. A tall body of 76.4 in (1,940 mm) means the roof is wrapped from a platform. Open-top SUV styling with five doors gives the film long, flat side panels. The tailgate carries the rear glass, so the film stops at its edge.

BAIC BJ2020 wrap ideas begin with the parts that are not covered. A fabric top is not wrapped and the film ends where it begins. If the truck has a folding hard top, each panel is wrapped separately. The tailgate glass is left clear and the film is trimmed to its edge.

How much vinyl to wrap a BAIC BJ2020 depends on which generation you have. The catalog shows one generation from 1989 to 2005, so the estimate stays the same. Plan about 46 ft (14 m) of 60-inch cast film for the body. If you choose chrome or patterned film, allow about 54 ft (16.5 m).

Questions about wrapping a BAIC BJ2020

How much vinyl does it take to wrap a BAIC BJ2020?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a BAIC BJ2020. That figure covers the open-top SUV body of the generation from 1989 to 2005. If you choose chrome or patterned film, plan for about 54 ft (16.5 m) instead.

Is the top of a BAIC BJ2020 wrapped?

No, the top of a BAIC BJ2020 is not wrapped if it is a fabric top. The film ends where the fabric begins along the body. A folding hard top is different: it is wrapped as separate panels.

Can I wrap only the hood or the roof of a BAIC BJ2020?

Yes, you can wrap only the hood or the roof of a BAIC BJ2020. A partial wrap often covers the hood, mirror caps, or tailgate. The roof can be wrapped on its own, but it needs a platform because the body is 76.4 in (1,940 mm) tall.

Is a BAIC BJ2020 hard to wrap?

A BAIC BJ2020 adds work because it is a tall open-top SUV. The roof is 76.4 in (1,940 mm) high, so installers use a platform. The tailgate glass and fabric top edges need careful trimming. Overall it is straightforward, but the height and open panels take extra time.