Wraps by car

BAIC EU5 wrap

The BAIC EU5 wrap page covers the first-generation compact sedan built from 2021 onward. A full vinyl wrap of this four-door body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 67 ft (20.5 m).

1generations17.5 mof film for a full wrap

BAIC EU5, first generation, factory photo
BAIC EU5, first generation. Factory color shown.

BAIC EU5 wrap colors and ideas

  • BAIC EU5 black wrap
  • BAIC EU5 white wrap
  • BAIC EU5 gray wrap
  • BAIC EU5 silver wrap
  • BAIC EU5 red wrap
  • BAIC EU5 blue wrap
  • BAIC EU5 green wrap
  • BAIC EU5 yellow wrap
  • BAIC EU5 orange wrap
  • BAIC EU5 purple wrap
  • BAIC EU5 pink wrap
  • BAIC EU5 teal wrap
  • BAIC EU5 brown wrap
  • BAIC EU5 gold wrap
  • BAIC EU5 chrome wrap
  • BAIC EU5 color shift wrap
  • BAIC EU5 carbon fiber wrap
  • BAIC EU5 camo and patterned wrap

How much vinyl to wrap a BAIC EU5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowsedan (4 doors)183.5 in (4,660 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

BAIC EU5 wrap cost factors

The BAIC EU5 wrap cost depends on the size of the car, the film chosen, and the shop's labor. This sedan needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film for a full color change. A chrome or patterned film uses about 67 ft (20.5 m), which raises the material portion of the cost. Removing trim and wrapping the charge port door adds time that is included in a full wrap quote.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

BAIC EU5 wraps by generation

Swipe sideways. Tap a card for the full description.

BAIC EU5, first generation, factory photo
Factory color shown

2021–now BAIC EU5 sedan (first generation)

2021–nowsedan (4 doors)183.5 in (4,660 mm)

The first-generation BAIC EU5 was restyled in 2021, and the bumpers and lights changed. Film cut for a pre-2021 car will not fit a post-2021 car at the front and rear. When you buy a pre-cut kit for this model, check that it matches your car's production date.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a BAIC EU5

A partial wrap on a BAIC EU5 can cover the roof, hood, or mirror caps for a two-tone look. A chrome delete covers the window trim and badges with black film for a cleaner appearance. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BAIC EU5: body, cut-outs and film

The BAIC EU5 vinyl wrap goes onto a sedan with four doors and a length of 183.5 in (4,660 mm). The sedan shape means large, continuous door and quarter panels that use film efficiently. The roof and hood are straightforward panels that need one person on each side to position the film.

BAIC EU5 wrap ideas should account for the electric charge port door, which is wrapped as a small piece of its own. The door handles and mirror caps come off for a cleaner edge, and the badges are removed for the hood and trunk areas. You can wrap the roof panel without removing the antenna if you cut around it carefully.

How much vinyl to wrap a BAIC EU5 depends on the film width and pattern. For the 2021 restyling, the bumpers and lights changed, so film cut for the earlier version does not fit the later one. When you order a kit, confirm the production year of your car before cutting.

Questions about wrapping a BAIC EU5

How much vinyl does it take to wrap a BAIC EU5?

A full wrap of a BAIC EU5 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, the amount rises to about 67 ft (20.5 m) because the pattern must be matched.

Which years of the BAIC EU5 take the same film cuts?

All BAIC EU5 models from 2021 onward share the same body shell, but the 2021 restyling changed the bumpers and lights. Film cut for a pre-2021 car will not fit a post-2021 car at the front and rear.

Can I wrap only the hood or the roof of a BAIC EU5?

Yes, you can wrap only the hood or the roof of a BAIC EU5. A partial wrap can cover the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges.

Is a BAIC EU5 hard to wrap?

The BAIC EU5 is not hard to wrap, but the electric charge port door adds a small extra step because it is wrapped as a separate piece. The sedan body is 183.5 in (4,660 mm) long, which means the roof film needs two installers to handle it without creasing.