Wraps by car

BAIC BJ212 wrap

The BAIC BJ212 wrap page covers the first generation, the only generation in this catalog, built from 1964 to 1987. This open-top SUV needs a full wrap of about 44 ft (13.5 m) of 60-inch (1.52 m) cast film. A chrome or patterned vinyl wrap uses about 52 ft (16 m) of film.

1generations13.5 mof film for a full wrap

BAIC BJ212, first generation, factory photo
BAIC BJ212, first generation. Factory color shown.

BAIC BJ212 wrap colors and ideas

  • BAIC BJ212 black wrap
  • BAIC BJ212 white wrap
  • BAIC BJ212 gray wrap
  • BAIC BJ212 silver wrap
  • BAIC BJ212 red wrap
  • BAIC BJ212 blue wrap
  • BAIC BJ212 green wrap
  • BAIC BJ212 yellow wrap
  • BAIC BJ212 orange wrap
  • BAIC BJ212 purple wrap
  • BAIC BJ212 pink wrap
  • BAIC BJ212 teal wrap
  • BAIC BJ212 brown wrap
  • BAIC BJ212 gold wrap
  • BAIC BJ212 chrome wrap
  • BAIC BJ212 color shift wrap
  • BAIC BJ212 carbon fiber wrap
  • BAIC BJ212 camo and patterned wrap

How much vinyl to wrap a BAIC BJ212

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1964–1987open-top SUV (5 doors)153.9 in (3,910 mm)about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

BAIC BJ212 wrap cost factors

The BAIC BJ212 wrap cost depends on the amount of film, the film type, and the labor hours. A full wrap uses about 44 ft (13.5 m) of 60-inch (1.52 m) film, and a chrome or patterned film uses about 52 ft (16 m). The tall body and the open top add preparation time, which changes the labor part of the cost.

  • Film for a full wrap: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: open-top SUV (5 doors).
  • Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A tall body (74.0 in (1,880 mm)): the roof is wrapped from a platform.

BAIC BJ212 wraps by generation

Swipe sideways. Tap a card for the full description.

BAIC BJ212, first generation, factory photo
Factory color shown

1964–1987 BAIC BJ212 open-top SUV (first generation)

1964–1987open-top SUV (5 doors)153.9 in (3,910 mm)

The first generation BAIC BJ212, built from 1964 to 1987, has an open top that is not wrapped. The film ends where the fabric top begins, along the top edge of the body. A folding hard top is wrapped as panels of its own if the owner wants it covered.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A tall body (74.0 in (1,880 mm)): the roof is wrapped from a platform.

Film: about 44 ft (13.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a BAIC BJ212

A BAIC BJ212 can also get a partial wrap on the hood, mirror caps, or tailgate. For a chrome delete on this BAIC BJ212, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film installed on the front end only.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a BAIC BJ212: body, cut-outs and film

A BAIC BJ212 vinyl wrap has to follow the open-top SUV body, which is 153.9 in (3,910 mm) long. The five-door body means film seams sit at the door gaps and the tailgate edges. Since the roof is fabric and not wrapped, the film stops cleanly at the top of the body.

BAIC BJ212 wrap ideas start with the tall body, 74.0 in (1,880 mm) high, so the roof is wrapped from a platform. The fabric top is not wrapped and the film ends where it begins. A tailgate with the rear glass in it means the film ends at the edge of the glass.

How much vinyl to wrap a BAIC BJ212 is based on the first generation body, the only one in this catalog. The film estimate of about 44 ft (13.5 m) of 60-inch (1.52 m) cast film is for the whole open-top body. Chrome or patterned film adds about 8 ft (2.5 m) because of waste from matching the pattern.

Questions about wrapping a BAIC BJ212

How much vinyl does it take to wrap a BAIC BJ212?

It takes about 44 ft (13.5 m) of 60-inch (1.52 m) cast film to wrap a BAIC BJ212. That figure is for the first generation body, which is the only generation in this catalog. For chrome or patterned film, the amount is about 52 ft (16 m).

Is the top of a BAIC BJ212 wrapped?

No, the fabric top of a BAIC BJ212 is not wrapped. The film ends where the fabric top begins, along the top edge of the body. A folding hard top, if fitted, is wrapped as panels of its own.

Can I wrap only the hood or the roof of a BAIC BJ212?

Yes, you can wrap only the hood or the roof of a BAIC BJ212. A partial wrap on the hood, mirror caps, or tailgate is a smaller job than a full wrap. The roof of this open-top SUV is not wrapped because it is fabric.

Is a BAIC BJ212 hard to wrap?

A BAIC BJ212 adds work because it is a tall body at 74.0 in (1,880 mm), so the roof is wrapped from a platform. The fabric top is not wrapped and the film ends where it begins, which needs a clean edge. The tailgate with the rear glass in it also requires the film to end at the edge of the glass.