Wraps by car

Baojun RC-5 wrap

The Baojun RC-5 wrap page covers one generation of this liftback and wagon, produced from 2020 to the present. A full vinyl wrap of the newest body uses about 52 ft (16 m) of 60-inch (1.52 m) cast film for the liftback and 56 ft (17 m) for the wagon. If you choose chrome or patterned film, plan for up to about 72 ft (22 m).

1generations16 mof film for a full wrap

Baojun RC-5, first generation, factory photo
Baojun RC-5, first generation. Factory color shown.

Baojun RC-5 wrap colors and ideas

  • Baojun RC-5 black wrap
  • Baojun RC-5 white wrap
  • Baojun RC-5 gray wrap
  • Baojun RC-5 silver wrap
  • Baojun RC-5 red wrap
  • Baojun RC-5 blue wrap
  • Baojun RC-5 green wrap
  • Baojun RC-5 yellow wrap
  • Baojun RC-5 orange wrap
  • Baojun RC-5 purple wrap
  • Baojun RC-5 pink wrap
  • Baojun RC-5 teal wrap
  • Baojun RC-5 brown wrap
  • Baojun RC-5 gold wrap
  • Baojun RC-5 chrome wrap
  • Baojun RC-5 color shift wrap
  • Baojun RC-5 carbon fiber wrap
  • Baojun RC-5 camo and patterned wrap

How much vinyl to wrap a Baojun RC-5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowliftback, wagon (5 doors)183.1 in (4,650 mm) to 184.4 in (4,685 mm)about 52 ft (16 m) for the liftback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m)

Baojun RC-5 wrap cost factors

The Baojun RC-5 wrap cost is driven by the film amount, the body style, and how many parts are removed or cut around. A liftback needs less film than a wagon, and a color change wrap with chrome or patterned film can require up to about 72 ft (22 m). Installers also add labor for the tailgate glass cut-out and for removing badges, handles and the antenna.

  • Film for a full wrap: about 52 ft (16 m) for the liftback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).
  • Body: liftback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Baojun RC-5 wraps by generation

Swipe sideways. Tap a card for the full description.

Baojun RC-5, first generation, factory photo
Factory color shown

2020–now Baojun RC-5 liftback, wagon (first generation)

2020–nowliftback, wagon (5 doors)183.1 in (4,650 mm) to 184.4 in (4,685 mm)

The first generation Baojun RC-5 comes as a liftback or a five-door wagon, and that choice decides the panel plan. The wagon has a taller tailgate with more surface area, so it uses about 4 ft (1 m) more film than the liftback. Both styles are built on the same platform, so the hood, front fenders and doors are identical.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the liftback to 56 ft (17 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Baojun RC-5

For smaller jobs, you can choose a partial wrap of the roof, the hood, or the mirror caps on a Baojun RC-5. A chrome delete covers the window trim and badges with black film to change the brightwork. A paint protection film (PPF) can be applied to the front end to protect the painted surfaces from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Baojun RC-5: body, cut-outs and film

A Baojun RC-5 vinyl wrap has to work with a body that runs 183.1 in (4,650 mm) to 184.4 in (4,685 mm) long, depending on the style. The liftback and the five-door wagon share the same front end, so the panel plan stays the same up to the rear doors. The wagon adds about 1.3 in (33 mm) of length and a taller rear section, which increases the film amount.

Baojun RC-5 wrap ideas often focus on the tailgate, where the rear glass is set into the panel. The film ends at the edge of the glass, so the installer cuts around it cleanly and may need to tuck the film under the weather seal. The door handles, badges and the shark-fin antenna come off for a cleaner install, and the mirror caps are wrapped separately.

If you want to know how much vinyl to wrap a Baojun RC-5, the answer depends on the body style you own. The wagon uses about 56 ft (17 m) of 60-inch (1.52 m) cast film, while the liftback uses about 52 ft (16 m). Since there is only one generation, you do not need to account for different front or rear designs across years.

Questions about wrapping a Baojun RC-5

How much vinyl does it take to wrap a Baojun RC-5?

A full wrap takes about 52 ft (16 m) to 56 ft (17 m) of 60-inch (1.52 m) cast film for a Baojun RC-5. The liftback sits at the lower end of that range, the wagon at the higher end, and chrome or patterned film can push it to about 72 ft (22 m).

Which Baojun RC-5 body takes more film?

The wagon takes more film than the liftback because of its taller tailgate and extra rear surface. The liftback uses about 52 ft (16 m), while the wagon uses about 56 ft (17 m) of 60-inch (1.52 m) cast film.

Can I wrap only the hood or the roof of a Baojun RC-5?

Yes, you can wrap only the hood or the roof of a Baojun RC-5 as a partial job. Mirror caps are another small panel that can be wrapped on its own, and a chrome delete covers just the window trim and badges.

Is a Baojun RC-5 hard to wrap?

A Baojun RC-5 is not especially hard to wrap, but the tailgate needs extra care because the rear glass is set into it. The installer has to cut the film at the edge of the glass and tuck it neatly, and the car's size means two people usually handle the large roof and side panels.