Wraps by car

Baojun Valli wrap

The Baojun Valli wrap page covers the first generation of the wagon, produced from 2021 to now. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 72 ft (22 m).

1generations17 mof film for a full wrap

Baojun Valli, first generation, factory photo
Baojun Valli, first generation. Factory color shown.

Baojun Valli wrap colors and ideas

  • Valli black wrap
  • Valli white wrap
  • Valli gray wrap
  • Valli silver wrap
  • Valli red wrap
  • Valli blue wrap
  • Valli green wrap
  • Valli yellow wrap
  • Valli orange wrap
  • Valli purple wrap
  • Valli pink wrap
  • Valli teal wrap
  • Valli brown wrap
  • Valli gold wrap
  • Valli chrome wrap
  • Valli color shift wrap
  • Valli carbon fiber wrap
  • Valli camo and patterned wrap

How much vinyl to wrap a Baojun Valli

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowwagon (5 doors)184.4 in (4,685 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Valli wrap cost factors

Valli wrap cost depends on the size of the car, the film chosen, and the labor for its panels. At 184.4 in (4,685 mm) long, the wagon needs about 56 ft (17 m) of standard film. Chrome or patterned film adds material and time, raising the total. The tailgate glass cut-out and roof rail trimming also affect the work involved.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Valli wraps by generation

Swipe sideways. Tap a card for the full description.

Baojun Valli, first generation, factory photo
Factory color shown

2021–now Valli wagon (first generation)

2021–nowwagon (5 doors)184.4 in (4,685 mm)

The first generation of the Baojun Valli is a five-door wagon built from 2021 to now. Its 184.4 in (4,685 mm) length means a full wrap uses about 56 ft (17 m) of film. The long body has continuous side panels that wrap in single pieces. The tailgate is one large panel with the rear glass inside it.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Valli

A partial wrap on a Baojun Valli covers the roof, hood, or mirror caps without wrapping the whole car. Valli chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less film than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Baojun Valli: body, cut-outs and film

The Baojun Valli vinyl wrap starts with a five-door wagon body that is 184.4 in (4,685 mm) long. Its long roofline and large rear quarter panels add surface area compared with a hatchback. The film estimate counts every painted panel including the tailgate. One generation means all Valli cars share the same panel count.

Valli wrap ideas must allow for the tailgate, where the rear glass is set into the panel. The film ends at the edge of the glass, so the installer trims around it neatly. Door handles, badges, and trim pieces are removed or masked for a clean install. The roof rails stay in place and the film is cut around their mounts.

To know how much vinyl to wrap a Valli, check the production year of your car. The catalog lists one generation from 2021 to now, so every Valli uses the same panel layout. Film estimates do not change between early and late cars. Only color or finish choice changes the amount from 56 ft (17 m) to 72 ft (22 m).

Questions about wrapping a Baojun Valli

How much vinyl does it take to wrap a Baojun Valli?

Yes, a full wrap of a Baojun Valli takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 72 ft (22 m). Those figures are for the first-generation wagon body from 2021 to now.

Can I wrap only the hood or the roof of a Valli?

Yes, you can wrap only the hood or the roof of a Valli. A partial wrap on this car typically covers the roof, hood, or mirror caps as separate jobs. That uses far less film than a full color change wrap.

Is a Valli hard to wrap?

The Valli is not especially hard to wrap, but its tailgate adds work. The rear glass is set into the tailgate panel, so the film must end at the edge of the glass. At 184.4 in (4,685 mm) long, the side panels are large and need care to install without wrinkles.

How many generations of the Valli does this page cover?

This page covers one generation of the Baojun Valli. It is the first generation, produced from 2021 to the present. All Valli cars in the catalog share the same wagon body style and dimensions.