Wraps by car

Baojun RS-3 wrap

This page covers the Baojun RS-3, a compact SUV built from 2019 to 2021 in one generation. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The page also lists jobs like partial wraps, chrome delete, and paint protection film.

1generations17.5 mof film for a full wrap

Baojun RS-3, first generation, factory photo
Baojun RS-3, first generation. Factory color shown.

Baojun RS-3 wrap colors and ideas

  • Baojun RS-3 black wrap
  • Baojun RS-3 white wrap
  • Baojun RS-3 gray wrap
  • Baojun RS-3 silver wrap
  • Baojun RS-3 red wrap
  • Baojun RS-3 blue wrap
  • Baojun RS-3 green wrap
  • Baojun RS-3 yellow wrap
  • Baojun RS-3 orange wrap
  • Baojun RS-3 purple wrap
  • Baojun RS-3 pink wrap
  • Baojun RS-3 teal wrap
  • Baojun RS-3 brown wrap
  • Baojun RS-3 gold wrap
  • Baojun RS-3 chrome wrap
  • Baojun RS-3 color shift wrap
  • Baojun RS-3 carbon fiber wrap
  • Baojun RS-3 camo and patterned wrap

How much vinyl to wrap a Baojun RS-3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–2021SUV (5 doors)169.3 in (4,300 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Baojun RS-3 wrap cost factors

The Baojun RS-3 wrap cost depends on the film type, the shop's labor rate, and the number of panels. The car is a five-door SUV with a moderate film amount of about 57 ft (17.5 m) for a full wrap. Cast film costs more than calendared film but conforms better to the bumper curves. Removing trim or badges adds time, and chrome delete requires extra pieces of black film.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Baojun RS-3 wraps by generation

Swipe sideways. Tap a card for the full description.

Baojun RS-3, first generation, factory photo
Factory color shown

2019–2021 Baojun RS-3 SUV (first generation)

2019–2021SUV (5 doors)169.3 in (4,300 mm)

The first generation Baojun RS-3 is a five-door SUV with a length of 169.3 in (4,300 mm). A full wrap needs about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. The body has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The number of panels is standard for a small SUV, with no extra-long doors or complex bumps.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Baojun RS-3

A partial wrap on the Baojun RS-3 can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap and target high-wear or high-visibility areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Baojun RS-3: body, cut-outs and film

The Baojun RS-3 is a five-door SUV with a length of 169.3 in (4,300 mm). Its size is similar to other small crossovers, so a full wrap uses a moderate amount of film. The number of panels is typical for a modern SUV, with separate doors, fenders, and bumpers. A wrap shop counts each panel when planning the job.

For Baojun RS-3 wrap ideas, start with the tailgate. The rear glass is set into the tailgate, so the film ends at the edge of the glass. The door handles and mirrors are separate pieces that can be wrapped or left as accents. The roof rails and the antenna base also need careful trimming.

To know how much vinyl to wrap a Baojun RS-3, measure the body panels. The catalog lists one generation, so the film estimate stays the same for all years. A full wrap uses about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. Plan for extra film if you choose a patterned vinyl or if the installer needs to redo a panel.

Questions about wrapping a Baojun RS-3

How much vinyl does it take to wrap a Baojun RS-3?

A full wrap of a Baojun RS-3 takes about 57 ft (17.5 m) of 60-inch (1.52 m) film. The figure is for the newest body, the first generation made from 2019 to 2021. Add about 66 ft (20 m) if you use chrome or patterned film.

Can I wrap only the hood or the roof of a Baojun RS-3?

Yes, you can wrap only the hood or the roof of a Baojun RS-3. A partial wrap covers the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges. Paint protection film is applied to the front end only.

Is a Baojun RS-3 hard to wrap?

The Baojun RS-3 is not too hard to wrap, but the tailgate adds work. The rear glass is in the tailgate, so the film ends at the edge of the glass. The SUV size of 169.3 in (4,300 mm) means more panels than a small hatchback, but the shapes are straightforward.

How many generations of the Baojun RS-3 does this page cover?

This page covers one generation of the Baojun RS-3, built from 2019 to 2021. The body style is a five-door SUV with the same length and film estimate for all years.