Wraps by car

BMW iX1 wrap

The BMW iX1 wrap page covers this electric SUV in full. The first generation has been in production since 2022 and is the only generation in the catalog. A complete vinyl wrap of the newest body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 7 ft (2 m) to that estimate.

1generations16 mof film for a full wrap

BMW iX1, first generation, factory photo
BMW iX1, first generation. Factory color shown.

BMW iX1 wrap colors and ideas

  • BMW iX1 black wrap
  • BMW iX1 white wrap
  • BMW iX1 gray wrap
  • BMW iX1 silver wrap
  • BMW iX1 red wrap
  • BMW iX1 blue wrap
  • BMW iX1 green wrap
  • BMW iX1 yellow wrap
  • BMW iX1 orange wrap
  • BMW iX1 purple wrap
  • BMW iX1 pink wrap
  • BMW iX1 teal wrap
  • BMW iX1 brown wrap
  • BMW iX1 gold wrap
  • BMW iX1 chrome wrap
  • BMW iX1 color shift wrap
  • BMW iX1 carbon fiber wrap
  • BMW iX1 camo and patterned wrap

How much vinyl to wrap a BMW iX1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)177.2 in (4,500 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

BMW iX1 wrap cost factors

BMW iX1 wrap cost is set by film choice, surface area, and labor. The car is 177.2 in (4,500 mm) long, so a full wrap uses about 52 ft (16 m) of film. The panoramic glass roof cannot be wrapped, which reduces the covered area compared to a metal roof. The roof rails, sensors, and cameras add time because they need cut-outs or removal.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Electric car: the charge port door is wrapped as a small piece of its own.

BMW iX1 wraps by generation

Swipe sideways. Tap a card for the full description.

BMW iX1, first generation, factory photo
Factory color shown

2022–now BMW iX1 SUV (first generation)

2022–nowSUV (5 doors)177.2 in (4,500 mm)

The first generation BMW iX1 has a glass roof that stays dark whatever the film color. Since the glass is not wrapped, the roof area is smaller than on a car with a metal roof. The film ends at the roof rails, which are present on every trim. This means you save film on the roof but still need to remove or cut around the rails.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a BMW iX1

A BMW iX1 partial wrap covers the hood, mirror caps, and tailgate without doing the whole car. Chrome delete on the BMW iX1 means covering window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film and take less time than a full color change wrap.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BMW iX1: body, cut-outs and film

A BMW iX1 vinyl wrap must fit the SUV body style and its 177.2 in (4,500 mm) length. The five-door shape means long roof and side panels that use film efficiently. Because the car is electric, there are fewer front air intakes to wrap around than on a combustion SUV. The tailgate is tall, so it needs careful film handling.

BMW iX1 wrap ideas should account for the glass roof and body hardware. Every trim has a panoramic glass roof, so the roof itself is not wrapped. Roof rails, parking sensors, and cameras require cut-outs or removal before film goes on. The charge port door is wrapped as a small separate piece.

How much vinyl to wrap a BMW iX1 depends on the generation, but there is only one. The first generation from 2022 to now is the sole body style in the catalog. For that body, a full wrap takes about 52 ft (16 m) of standard cast film. If you choose chrome or patterned film, plan for about 59 ft (18 m).

Questions about wrapping a BMW iX1

How much vinyl does it take to wrap a BMW iX1?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a BMW iX1. For chrome or patterned film, the estimate is about 59 ft (18 m). The first generation from 2022 to now is the only body in the catalog. The glass roof reduces the covered area slightly.

Can the roof of a BMW iX1 be wrapped?

The roof of a BMW iX1 cannot be wrapped because every trim has a panoramic glass roof. Glass is not wrapped, so the roof stays dark no matter the film color. The film ends at the roof rails, which are also present on every trim. You can still wrap the pillars and the area around the glass.

Can I wrap only the hood or the roof of a BMW iX1?

Yes, you can wrap only the hood or the roof of a BMW iX1, but the roof is glass. For the hood, a partial wrap covers the hood, mirror caps, and tailgate. For the roof, since the glass is not wrapped, you would wrap only the surrounding metal edges. A partial wrap is a good way to change the look without a full vinyl wrap.

Is a BMW iX1 hard to wrap?

A BMW iX1 is somewhat hard to wrap because of its glass roof and body hardware. Every trim has a panoramic glass roof, roof rails, parking sensors, and cameras. The roof rails must be removed or the film cut along them, and the sensors and cameras need precise cut-outs. The size of 177.2 in (4,500 mm) also means long film panels that need careful handling.