Wraps by car

BMW X3 M wrap

A BMW X3 M wrap covers the mid-size SUV in a single generation, the F97 body built from 2019 to now. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. The 2021 restyling adds a little length, so later cars may need slightly more material.

1generations16.5 mof film for a full wrap

BMW X3 M, first generation, factory photo
BMW X3 M, first generation. Factory color shown.

BMW X3 M wrap colors and ideas

  • X3 M black wrap
  • X3 M white wrap
  • X3 M gray wrap
  • X3 M silver wrap
  • X3 M red wrap
  • X3 M blue wrap
  • X3 M green wrap
  • X3 M yellow wrap
  • X3 M orange wrap
  • X3 M purple wrap
  • X3 M pink wrap
  • X3 M teal wrap
  • X3 M brown wrap
  • X3 M gold wrap
  • X3 M chrome wrap
  • X3 M color shift wrap
  • X3 M carbon fiber wrap
  • X3 M camo and patterned wrap

How much vinyl to wrap a BMW X3 M

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)185.7 in (4,716 mm) to 186.1 in (4,726 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

X3 M wrap cost factors

X3 M wrap cost depends on the size of the car, the number of cut-outs, and the finish you choose. The 2019–now body needs about 54 ft (16.5 m) of film, with more for chrome or patterned film. Removing the roof rails and cutting around sensors and cameras adds labor time. The final amount also changes with the condition of the paint and whether you include the door jambs.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2021: bumpers and lights differ between the versions, and so do the film cuts.

X3 M wraps by generation

Swipe sideways. Tap a card for the full description.

BMW X3 M, first generation, factory photo
Factory color shown

2019–now X3 M SUV (first generation)

2019–nowSUV (5 doors)185.7 in (4,716 mm) to 186.1 in (4,726 mm)

The first-generation BMW X3 M has a glass roof that is not wrapped, so the roof stays dark whatever the color of the film. The wrap stops at the roof rails, and the glass itself is left untouched. This means you do not need to spend film on the largest horizontal panel of the car. The dark roof still works with any color change wrap on the body.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an X3 M

A partial wrap on the BMW X3 M can cover the hood, mirror caps, or tailgate. An X3 M chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear option for the front end of the car. These jobs use less film than a full wrap and can be done without removing the roof rails.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BMW X3 M: body, cut-outs and film

This BMW X3 M vinyl wrap is shaped by a five-door SUV body that measures from 185.7 in (4,716 mm) to 186.1 in (4,726 mm). The longer post-2021 cars have revised bumper shapes, which changes the film layout at the front and rear. The sides stay largely the same, so most of the extra material goes into the front and rear fascias. Every trim has a styling kit on the bumpers and sills, which adds separate pieces that must be wrapped individually.

X3 M wrap ideas start with the parts that need careful cutting or removal. The tailgate has rear glass in it, and the film ends at the edge of the glass. Every trim has a panoramic glass roof, which is not wrapped, and the film ends at the roof rails. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Parking sensors and cameras in the bumpers and body require the film to be cut around each sensor and lens.

How much vinyl to wrap an X3 M changes with the production year of the car. The first-generation F97 runs from 2019 onward, and the 2021 restyling altered the front and rear bumper design. A wrap on a post-2021 car uses more film on the bumpers, while the roof and sides stay the same. Anyone counting film should measure the car itself, because the length varies from 185.7 in (4,716 mm) to 186.1 in (4,726 mm).

Questions about wrapping a BMW X3 M

How much vinyl does it take to wrap a BMW X3 M?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a BMW X3 M. The newest body, built from 2019, needs that much for a full color change wrap. A chrome or patterned film uses about 61 ft (18.5 m) because of the extra material needed for the styling kit.

Can the roof of an X3 M be wrapped?

Yes, the roof of an X3 M can be wrapped, but the panoramic glass roof is not covered. The film ends at the edge of the glass and at the roof rails. Some trims have roof rails that must come off first, or the film is cut along them.

Which years of the X3 M take the same film cuts?

All years of the X3 M from 2019 to now share the same body for most film cuts. The 2021 restyling only changed the front and rear bumpers, so the side and roof cuts stay the same. For the bumpers, you need separate cuts for the pre-2021 and post-2021 cars.

Can I wrap only the hood or the roof of an X3 M?

Yes, you can wrap only the hood or the roof of an X3 M. A partial wrap of the hood, mirror caps, or tailgate is a smaller job than a full wrap. The roof can be wrapped around the glass panel, and the roof rails are handled as needed.