Wraps by car

BMW iX5 Hydrogen wrap

The BMW iX5 Hydrogen wrap is a full color change on a large hydrogen fuel cell SUV. This page covers the first generation, built from 2023 to now. A full wrap of the newest body takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations20 mof film for a full wrap

BMW iX5 Hydrogen, first generation, factory photo
BMW iX5 Hydrogen, first generation. Factory color shown.

BMW iX5 Hydrogen wrap colors and ideas

  • iX5 Hydrogen black wrap
  • iX5 Hydrogen white wrap
  • iX5 Hydrogen gray wrap
  • iX5 Hydrogen silver wrap
  • iX5 Hydrogen red wrap
  • iX5 Hydrogen blue wrap
  • iX5 Hydrogen green wrap
  • iX5 Hydrogen yellow wrap
  • iX5 Hydrogen orange wrap
  • iX5 Hydrogen purple wrap
  • iX5 Hydrogen pink wrap
  • iX5 Hydrogen teal wrap
  • iX5 Hydrogen brown wrap
  • iX5 Hydrogen gold wrap
  • iX5 Hydrogen chrome wrap
  • iX5 Hydrogen color shift wrap
  • iX5 Hydrogen carbon fiber wrap
  • iX5 Hydrogen camo and patterned wrap

How much vinyl to wrap a BMW iX5 Hydrogen

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)193.8 in (4,922 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

iX5 Hydrogen wrap cost factors

The iX5 Hydrogen wrap cost depends on the size of the SUV and the film chosen. A full wrap uses about 66 ft (20 m) of 60-inch (1.52 m) film. Chrome or patterned film raises the amount to about 77 ft (23.5 m). The wrap shop's labor for a vehicle of this length also affects the cost.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

iX5 Hydrogen wraps by generation

Swipe sideways. Tap a card for the full description.

BMW iX5 Hydrogen, first generation, factory photo
Factory color shown

2023–now iX5 Hydrogen SUV (first generation)

2023–nowSUV (5 doors)193.8 in (4,922 mm)

The first generation of the iX5 Hydrogen is a five-door SUV with a length of 193.8 in (4,922 mm). Its large panels mean more film per panel than on a smaller car. A full wrap takes about 66 ft (20 m) of 60-inch (1.52 m) film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an iX5 Hydrogen

The iX5 Hydrogen chrome delete covers the window trim and badges with black film. A partial wrap can protect the roof, hood, or mirror caps. Paint protection film (PPF) is often applied to the front end as a clear barrier.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a BMW iX5 Hydrogen: body, cut-outs and film

The BMW iX5 Hydrogen vinyl wrap covers an SUV with five doors and a length of 193.8 in (4,922 mm). The tall sides and long roof use more film than a sedan of the same footprint. A full wrap includes the hood, roof, all four doors, front fenders, rear quarter panels, and the tailgate.

The iX5 Hydrogen wrap ideas start with the tailgate, which has the rear glass in it, so the film ends at the edge of the glass. The door handles, badges, and antenna need cut-outs or removal during the wrap. The front bumper has large air intakes that require extra time and relief cuts.

How much vinyl to wrap an iX5 Hydrogen depends on the film width and pattern. With 60-inch (1.52 m) cast film, the SUV needs about 66 ft (20 m). For chrome or patterned film, plan on about 77 ft (23.5 m). Curved areas like the bumpers increase waste.

Questions about wrapping a BMW iX5 Hydrogen

How much vinyl does it take to wrap a BMW iX5 Hydrogen?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl to wrap a BMW iX5 Hydrogen. For chrome or patterned film, plan on about 77 ft (23.5 m). The SUV's length of 193.8 in (4,922 mm) drives the amount.

Can I wrap only the hood or the roof of an iX5 Hydrogen?

Yes, you can wrap only the hood or the roof of an iX5 Hydrogen. Partial wraps often cover the roof, hood, or mirror caps. A chrome delete on the window trim and badges is also an option.

Is an iX5 Hydrogen hard to wrap?

Yes, an iX5 Hydrogen is relatively hard to wrap because the tailgate has glass in it, so the film ends at the edge of the glass. Its large size and deep bumper intakes add extra cutting and stretching. The door handles and antenna need removal or careful cut-outs.

How many generations of the iX5 Hydrogen does this page cover?

This page covers one generation of the iX5 Hydrogen, from 2023 to now. It is the only generation in the catalog.