Wraps by car

Brilliance FRV (BS2) wrap

The Brilliance FRV (BS2) gets this wrap page. It appears in one catalog generation. A full wrap of the 2008–2013 hatchback takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations16.5 mof film for a full wrap

Brilliance FRV (BS2), first generation, factory photo
Brilliance FRV (BS2), first generation. Factory color shown.

Brilliance FRV (BS2) wrap colors and ideas

  • FRV (BS2) black wrap
  • FRV (BS2) white wrap
  • FRV (BS2) gray wrap
  • FRV (BS2) silver wrap
  • FRV (BS2) red wrap
  • FRV (BS2) blue wrap
  • FRV (BS2) green wrap
  • FRV (BS2) yellow wrap
  • FRV (BS2) orange wrap
  • FRV (BS2) purple wrap
  • FRV (BS2) pink wrap
  • FRV (BS2) teal wrap
  • FRV (BS2) brown wrap
  • FRV (BS2) gold wrap
  • FRV (BS2) chrome wrap
  • FRV (BS2) color shift wrap
  • FRV (BS2) carbon fiber wrap
  • FRV (BS2) camo and patterned wrap

How much vinyl to wrap a Brilliance FRV (BS2)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2013hatchback (5 doors)166.9 in (4,240 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

FRV (BS2) wrap cost factors

FRV (BS2) wrap cost depends on the size and the film choice. The car needs about 54 ft (16.5 m) of 60-inch (1.52 m) cast film, or about 64 ft (19.5 m) for chrome or patterned film. The amount of cut-outs around the hatch glass also affects labor. The final cost changes with the installer's rates for a compact five-door car.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

FRV (BS2) wraps by generation

Swipe sideways. Tap a card for the full description.

Brilliance FRV (BS2), first generation, factory photo
Factory color shown

2008–2013 FRV (BS2) hatchback (first generation)

2008–2013hatchback (5 doors)166.9 in (4,240 mm)

The first generation Brilliance FRV (BS2) ran from 2008 to 2013. Because the car is now over a decade old, panels may be original or repainted. Always do a test spot before a full wrap. That tells you whether old paint will lift when the film is removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an FRV (BS2)

The Brilliance FRV (BS2) suits several partial jobs. A partial wrap can cover the roof, hood, or mirror caps. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Brilliance FRV (BS2): body, cut-outs and film

A Brilliance FRV (BS2) vinyl wrap covers one body style. The car is a five-door hatchback with a length of 166.9 in (4,240 mm). That size makes it a manageable compact project for one installer. The straight sides and simple front end reduce the amount of wasted film.

FRV (BS2) wrap ideas start with the tailgate. The rear glass is set into the tailgate, so the film ends at the edge of the glass and does not wrap behind it. You do not need to remove the glass. Trim the film cleanly along the glass edge for a neat finish.

To work out how much vinyl to wrap an FRV (BS2), use the single-generation data. This page covers the first generation from 2008–2013 only. Since there is just one body, you do not change film estimates between generations. The same 166.9 in (4,240 mm) length applies to every FRV (BS2) you work on.

Questions about wrapping a Brilliance FRV (BS2)

How much vinyl does it take to wrap a Brilliance FRV (BS2)?

A full wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That is the film estimate for the newest FRV (BS2) body from 2008–2013. Chrome or patterned film runs to about 64 ft (19.5 m) because of the extra material needed to match patterns.

Can I wrap only the hood or the roof of an FRV (BS2)?

Yes, you can wrap only the hood or the roof of an FRV (BS2). These are listed as partial wrap options. Mirror caps are another small job. A partial wrap needs far less film than a full wrap.

Is an FRV (BS2) hard to wrap?

The FRV (BS2) is not especially hard to wrap, but the tailgate adds work. The rear glass is set into the tailgate, so the film ends at the edge of the glass. You need careful trimming there. At 166.9 in (4,240 mm) long, the car is a typical compact hatchback to handle.

How many generations of the FRV (BS2) does this page cover?

This page covers one generation of the FRV (BS2), from 2008 to 2013.