Wraps by car

Brilliance H230 wrap

The Brilliance H230 wrap guide covers the first-generation subcompact, produced from 2015 to 2019 in hatchback and sedan forms. A full vinyl wrap of the newest body takes about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan. The car measures 165.0 in (4,190 mm) to 172.8 in (4,390 mm) depending on the body style.

1generations16.5 mof film for a full wrap

Brilliance H230, first generation, factory photo
Brilliance H230, first generation. Factory color shown.

Brilliance H230 wrap colors and ideas

  • Brilliance H230 black wrap
  • Brilliance H230 white wrap
  • Brilliance H230 gray wrap
  • Brilliance H230 silver wrap
  • Brilliance H230 red wrap
  • Brilliance H230 blue wrap
  • Brilliance H230 green wrap
  • Brilliance H230 yellow wrap
  • Brilliance H230 orange wrap
  • Brilliance H230 purple wrap
  • Brilliance H230 pink wrap
  • Brilliance H230 teal wrap
  • Brilliance H230 brown wrap
  • Brilliance H230 gold wrap
  • Brilliance H230 chrome wrap
  • Brilliance H230 color shift wrap
  • Brilliance H230 carbon fiber wrap
  • Brilliance H230 camo and patterned wrap

How much vinyl to wrap a Brilliance H230

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2019hatchback, sedan (4 or 5 doors)165.0 in (4,190 mm) to 172.8 in (4,390 mm)about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)

Brilliance H230 wrap cost factors

The Brilliance H230 wrap cost depends on the body style, the film type, and the number of cut-outs. The hatchback needs about 52 ft (16 m) of film and the sedan about 54 ft (16.5 m). A chrome or patterned film can take up to about 62 ft (19 m) because of pattern matching. Trims with a sunroof, parking sensors, or fog lamps add cut-out work but no extra film area.

  • Film for a full wrap: about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Brilliance H230 wraps by generation

Swipe sideways. Tap a card for the full description.

Brilliance H230, first generation, factory photo
Factory color shown

2015–2019 Brilliance H230 hatchback, sedan (first generation)

2015–2019hatchback, sedan (4 or 5 doors)165.0 in (4,190 mm) to 172.8 in (4,390 mm)

The first-generation Brilliance H230, sold from 2015 to 2019, offers a hatchback and a sedan style. The style decides the panel plan and the film amount, with the sedan taking about 2 ft (0.5 m) more film. The hatchback has a tailgate with the rear glass in it, while the sedan has a separate trunk lid. Both styles fit on 60-inch (1.52 m) cast film with no extra seams.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Roof, hood, chrome delete and PPF on a Brilliance H230

A partial wrap on a Brilliance H230 can cover the roof, hood, or mirror caps as separate jobs. A Brilliance H230 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done on either body style.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Brilliance H230: body, cut-outs and film

The Brilliance H230 vinyl wrap follows a straightforward panel layout because the car is a small hatchback or sedan with four or five doors. The body length of 165.0 in (4,190 mm) to 172.8 in (4,390 mm) means every panel is short enough to fit on 60-inch (1.52 m) cast film. The hatchback has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The sedan has a separate trunk lid, which changes the rear panel plan and adds a little film.

Brilliance H230 wrap ideas start with the cut-outs that a clean install needs on every trim. Some trims have a sunroof, and the roof film is cut around its opening. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Some trims have fog lamps in the front bumper, which means cut-outs in the bumper film.

To know how much vinyl to wrap a Brilliance H230, you compare the two body styles. The hatchback uses about 52 ft (16 m) of film, while the sedan uses about 54 ft (16.5 m). The sedan is 172.8 in (4,390 mm) long, and the hatchback is 165.0 in (4,190 mm) long. The sedan has a separate trunk lid that adds a panel and a little more film than the hatchback tailgate.

Questions about wrapping a Brilliance H230

How much vinyl does it take to wrap a Brilliance H230?

A Brilliance H230 full wrap takes about 52 ft (16 m) of vinyl for the hatchback and about 54 ft (16.5 m) for the sedan. The estimate is for 60-inch (1.52 m) cast film. A chrome or patterned film may take up to about 62 ft (19 m). The car is a subcompact with a length of 165.0 in (4,190 mm) to 172.8 in (4,390 mm).

Can the roof of a Brilliance H230 be wrapped?

Yes, the roof of a Brilliance H230 can be wrapped on its own. The roof is a single panel that fits within a 60-inch (1.52 m) film width. Some trims have a sunroof, and the film is then cut around its opening. A roof wrap is a partial job that uses less film than a full wrap.

Which Brilliance H230 body takes more film?

The sedan takes more film than the hatchback: about 54 ft (16.5 m) against about 52 ft (16 m). The sedan is 172.8 in (4,390 mm) long, while the hatchback is 165.0 in (4,190 mm) long. The sedan has a separate trunk lid to wrap, and the hatchback's tailgate includes the rear glass. The difference is about 2 ft (0.5 m) of 60-inch (1.52 m) film.

Can I wrap only the hood or the roof of a Brilliance H230?

Yes, you can wrap only the hood or only the roof of a Brilliance H230. Both panels are offered as partial wrap jobs along with the mirror caps. The hood and roof are clean, single panels with no cut-outs unless the car has a sunroof. A hood or roof wrap uses much less film than a full wrap of about 52 ft (16 m) to 54 ft (16.5 m).