Wraps by car

Brilliance M3 (BC3) wrap

This page covers the Brilliance M3 (BC3) vinyl wrap. The Brilliance M3 (BC3) was made in one generation from 2007 to 2011. The body is a compact coupe with two doors and a length of 176.8 in (4,490 mm). A full wrap of this body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Brilliance M3 (BC3), first generation, factory photo
Brilliance M3 (BC3), first generation. Factory color shown.

Brilliance M3 (BC3) wrap colors and ideas

  • M3 (BC3) black wrap
  • M3 (BC3) white wrap
  • M3 (BC3) gray wrap
  • M3 (BC3) silver wrap
  • M3 (BC3) red wrap
  • M3 (BC3) blue wrap
  • M3 (BC3) green wrap
  • M3 (BC3) yellow wrap
  • M3 (BC3) orange wrap
  • M3 (BC3) purple wrap
  • M3 (BC3) pink wrap
  • M3 (BC3) teal wrap
  • M3 (BC3) brown wrap
  • M3 (BC3) gold wrap
  • M3 (BC3) chrome wrap
  • M3 (BC3) color shift wrap
  • M3 (BC3) carbon fiber wrap
  • M3 (BC3) camo and patterned wrap

How much vinyl to wrap a Brilliance M3 (BC3)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2011coupe (2 doors)176.8 in (4,490 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

M3 (BC3) wrap cost factors

M3 (BC3) wrap cost depends on the amount of film and the prep work for this body. A full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film, and more if the film has chrome or a pattern. The two long doors require large single pieces, which need careful handling and add labor time. Paint condition also matters on a car of these years, because original or repainted panels may need extra prep before the film goes on.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

M3 (BC3) wraps by generation

Swipe sideways. Tap a card for the full description.

Brilliance M3 (BC3), first generation, factory photo
Factory color shown

2007–2011 M3 (BC3) coupe (first generation)

2007–2011coupe (2 doors)176.8 in (4,490 mm)

The first generation Brilliance M3 (BC3) runs from 2007 to 2011. This coupe body is 176.8 in (4,490 mm) long and has two doors, so a full wrap needs about 49 ft (15 m) of 60-inch (1.52 m) film. On a car of these years the panels may be original or repainted, and a test spot comes before a full wrap. The two long side doors are each wrapped as one large piece of film, which makes the job smoother but calls for a steady hand.

Two long side doors: each door is one large piece of film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an M3 (BC3)

A partial wrap on an M3 (BC3) can cover the roof, hood, or mirror caps. For a chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is a clear film applied to the front end. Each of these jobs uses less material than a full wrap and can be done without taking off the doors.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Brilliance M3 (BC3): body, cut-outs and film

A Brilliance M3 (BC3) vinyl wrap is sized around a compact coupe body. The car has two long side doors, and each door is one large piece of film. The overall length of 176.8 in (4,490 mm) keeps the main panels within standard roll widths. This body style means fewer seams on the sides and a clean look on the large door surfaces.

M3 (BC3) wrap ideas should account for the two long side doors. Each door is wrapped as one large piece, so a clean job needs careful squeegee work and no relief cuts across the panel. The front and rear bumpers come off for a proper wrap, and the door handles are removed for cut-outs. The coupe shape leaves the roof pillars narrow, so an installer may choose to wrap them in one run with the roof.

To know how much vinyl to wrap an M3 (BC3), start with the body length and panel count. The coupe has two doors, a hood, a roof, a trunk lid, and both bumpers, all within a length of 176.8 in (4,490 mm). A full wrap uses about 49 ft (15 m) of 60-inch (1.52 m) cast film, and chrome or patterned film takes about 61 ft (18.5 m). Because the car was made from 2007 to 2011, panels may be original or repainted, and a test spot comes before a full wrap.

Questions about wrapping a Brilliance M3 (BC3)

How much vinyl does it take to wrap a Brilliance M3 (BC3)?

It takes about 49 ft (15 m) of 60-inch (1.52 m) cast film to wrap a Brilliance M3 (BC3). If the film is chrome or patterned, plan for about 61 ft (18.5 m). This estimate covers the full coupe body with its two doors and 176.8 in (4,490 mm) length.

Can I wrap only the hood or the roof of an M3 (BC3)?

Yes, an M3 (BC3) can be wrapped only on the hood or the roof. A partial wrap also works for mirror caps, and a clear paint protection film can be put on the front end. A chrome delete covers the window trim and badges with black film. These smaller jobs use less film than a full wrap and leave the doors untouched.

Is an M3 (BC3) hard to wrap?

An M3 (BC3) is not hard to wrap, but the two long side doors add work. Each door is one large piece of film, so the installer needs to lay it without creases and work out air with a squeegee. The compact coupe length of 176.8 in (4,490 mm) keeps the other panels simple. The doors take the most time because of their size and the need for a clean seam at the edges.

How many generations of the M3 (BC3) does this page cover?

This page covers one generation of the M3 (BC3). The coupe was made from 2007 to 2011, and that is the only body style in the catalog. A full wrap of this generation takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.