Wraps by car

Bristol Blenheim Speedster wrap

The Bristol Blenheim Speedster wrap is a full color change wrap for the only generation of this open sports car, produced from 2003 to 2011. A full wrap of the newest convertible body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 48 ft (14.5 m). This page explains the wrap process, film quantities, and smaller vinyl wrap jobs for the Blenheim Speedster.

1generations12.5 mof film for a full wrap

Bristol Blenheim Speedster, first generation, factory photo
Bristol Blenheim Speedster, first generation. Factory color shown.

Bristol Blenheim Speedster wrap colors and ideas

  • Blenheim Speedster black wrap
  • Blenheim Speedster white wrap
  • Blenheim Speedster gray wrap
  • Blenheim Speedster silver wrap
  • Blenheim Speedster red wrap
  • Blenheim Speedster blue wrap
  • Blenheim Speedster green wrap
  • Blenheim Speedster yellow wrap
  • Blenheim Speedster orange wrap
  • Blenheim Speedster purple wrap
  • Blenheim Speedster pink wrap
  • Blenheim Speedster teal wrap
  • Blenheim Speedster brown wrap
  • Blenheim Speedster gold wrap
  • Blenheim Speedster chrome wrap
  • Blenheim Speedster color shift wrap
  • Blenheim Speedster carbon fiber wrap
  • Blenheim Speedster camo and patterned wrap

How much vinyl to wrap a Bristol Blenheim Speedster

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2011convertible (2 doors)184.0 in (4,674 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Blenheim Speedster wrap cost factors

The Blenheim Speedster wrap cost is based on the size of the car, the film type, and the amount of disassembly. A larger body like this 184.0 in (4,674 mm) convertible uses more film than a small coupe. Chrome or patterned film raises the cost because it needs about 48 ft (14.5 m) rather than 41 ft (12.5 m) of standard cast film.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Blenheim Speedster wraps by generation

Swipe sideways. Tap a card for the full description.

Bristol Blenheim Speedster, first generation, factory photo
Factory color shown

2003–2011 Blenheim Speedster convertible (first generation)

2003–2011convertible (2 doors)184.0 in (4,674 mm)

The open top of the first generation Bristol Blenheim Speedster is not wrapped, and the film ends where the fabric top begins. If a folding hard top is fitted, each panel is wrapped separately and the film is trimmed at the panel gaps. The installer works around the top mechanism without covering any moving parts.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Blenheim Speedster

A partial wrap on a Bristol Blenheim Speedster can cover the hood, mirror caps, or rear deck without wrapping the whole car. Chrome delete on this model involves covering window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bristol Blenheim Speedster: body, cut-outs and film

The Bristol Blenheim Speedster vinyl wrap covers a single body style: a two-door convertible with an overall length of 184.0 in (4,674 mm). A fabric top is not wrapped, so the film stops where the top begins and the body panels below are covered in full. The long hood and large rear deck of this sports car add surface area, which increases film use compared with a shorter car.

Blenheim Speedster wrap ideas must account for a convertible body where the fabric top is left unwrapped and film ends at its edge. The front bumper, rear bumper, and side mirrors are common areas for cut-outs or removal during installation. Handles, badges, and trim pieces are removed where possible so the film can be tucked for a clean edge.

How much vinyl to wrap a Blenheim Speedster depends on the film type and the generation, but only one generation exists for this model. For the 2003–2011 convertible, a full wrap takes about 41 ft (12.5 m) of standard cast film. Chrome or patterned film requires more, about 48 ft (14.5 m), because of pattern matching and trimming.

Questions about wrapping a Bristol Blenheim Speedster

How much vinyl does it take to wrap a Bristol Blenheim Speedster?

A full wrap of a Bristol Blenheim Speedster takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast vinyl. If you use chrome or patterned film, allow about 48 ft (14.5 m). These figures are based on the 2003–2011 convertible body.

Is the top of a Blenheim Speedster wrapped?

No, the top of a Blenheim Speedster is not wrapped. The fabric top is left bare, and the wrap film ends where the top begins.

Can I wrap only the hood or the roof of a Blenheim Speedster?

Yes, you can wrap only the hood of a Blenheim Speedster, and the roof is not applicable because the car has a fabric top. A partial wrap can also cover the mirror caps or rear deck. Chrome delete of window trim and badges is another smaller job.

Is a Blenheim Speedster hard to wrap?

Yes, a Blenheim Speedster adds some work because of its long hood and large rear deck, which require careful film handling. The convertible body means the installer must work around the fabric top and stop the film at its edge. Remove badges, handles, and mirrors to get a tidy finish.