Wraps by car

Bristol Blenheim wrap

This page covers the Bristol Blenheim, a sports car built in three generations from 1993 to 2011. The newest body is a coupe with two doors and a length of 191.7 in (4,870 mm). A full vinyl wrap of that body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film or about 64 ft (19.5 m) if you choose chrome or patterned film.

3generations16 mof film for a full wrap

Bristol Blenheim, third generation, factory photo
Bristol Blenheim, third generation. Factory color shown.

Bristol Blenheim wrap colors and ideas

  • Blenheim black wrap
  • Blenheim white wrap
  • Blenheim gray wrap
  • Blenheim silver wrap
  • Blenheim red wrap
  • Blenheim blue wrap
  • Blenheim green wrap
  • Blenheim yellow wrap
  • Blenheim orange wrap
  • Blenheim purple wrap
  • Blenheim pink wrap
  • Blenheim teal wrap
  • Blenheim brown wrap
  • Blenheim gold wrap
  • Blenheim chrome wrap
  • Blenheim color shift wrap
  • Blenheim carbon fiber wrap
  • Blenheim camo and patterned wrap

How much vinyl to wrap a Bristol Blenheim

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1999–2011coupe (2 doors)191.7 in (4,870 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1998–1999coupe (2 doors)191.7 in (4,870 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1993–1997coupe (2 doors)191.7 in (4,870 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Blenheim wrap cost factors

Blenheim wrap cost depends on film choice, panel condition, and the amount of disassembly. A full wrap uses about 52 ft (16 m) of 60-inch (1.52 m) cast film, while chrome or patterned film pushes the amount to about 64 ft (19.5 m). Paint age matters because original or repainted panels can behave differently under film. Removing and refitting trim pieces adds labor that a simple panel wrap avoids.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Blenheim wraps by generation

Swipe sideways. Tap a card for the full description.

Bristol Blenheim, third generation, factory photo
Factory color shown

1999–2011 Blenheim coupe (third generation)

1999–2011coupe (2 doors)191.7 in (4,870 mm)

The third generation Bristol Blenheim was built from 1999 to 2011. On a car of these years, paint may be original or repainted, and a test spot comes before a full wrap. The coupe body has two long side doors that each take one large piece of film. Its length of 191.7 in (4,870 mm) is the same as the other generations.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Bristol Blenheim, second generation, factory photo
Factory color shown

1998–1999 Blenheim coupe (second generation)

1998–1999coupe (2 doors)191.7 in (4,870 mm)

The second generation Bristol Blenheim ran from 1998 to 1999. Its size and body style mean the amount of film and the number of panels stay the same as the newest body. The coupe shape and length of 191.7 in (4,870 mm) require about 52 ft (16 m) of 60-inch (1.52 m) cast film. The two long doors are each wrapped as one large piece.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Bristol Blenheim, first generation, factory photo
Factory color shown

1993–1997 Blenheim coupe (first generation)

1993–1997coupe (2 doors)191.7 in (4,870 mm)

The first generation Bristol Blenheim was produced from 1993 to 1997. Its size and body style mean the amount of film and the number of panels are unchanged from the later cars. The coupe body is 191.7 in (4,870 mm) long and has two side doors, each one large film piece. A full wrap takes the same film as the newest generation.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Blenheim

A partial wrap on the Blenheim covers the roof, hood, or mirror caps separately. Blenheim chrome delete hides the window trim and badges under black film. Paint protection film (PPF) is available as clear film on the front end. These smaller jobs let you focus on the parts that matter most to you.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Bristol Blenheim: body, cut-outs and film

The Bristol Blenheim vinyl wrap is shaped by its coupe body style and its size of 191.7 in (4,870 mm). A two-door coupe means fewer door gaps than a sedan, so the sides flow in larger pieces. The large doors and long panels reduce the number of seams in the film. This gives a cleaner look but calls for careful handling of each big sheet.

Blenheim wrap ideas must account for the two long side doors, where each door is one large piece of film. The door handles, mirrors, and window trim still need to be removed or cut around. The hood and roof are straightforward panels with defined edges. Working around the door gaps takes time because the film must be tucked and trimmed cleanly.

To know how much vinyl to wrap a Blenheim, compare the three generations. All three have the same coupe body style and the same length of 191.7 in (4,870 mm). The film estimate stays the same at about 52 ft (16 m) of 60-inch (1.52 m) cast film or about 64 ft (19.5 m) for chrome or patterned film. The opening years are the only real difference: 1993–1997, 1998–1999, and 1999–2011.

Questions about wrapping a Bristol Blenheim

How much vinyl does it take to wrap a Bristol Blenheim?

A full wrap of a Bristol Blenheim takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate rises to about 64 ft (19.5 m). These figures are based on the newest body, but all three generations share the same size.

Can I wrap only the hood or the roof of a Blenheim?

Yes, you can wrap only the hood or the roof of a Blenheim. A partial wrap covers the roof, hood, or mirror caps, depending on what you want to change. Chrome delete and clear paint protection film on the front end are other options. You do not have to commit to a full vehicle wrap.

Is a Blenheim hard to wrap?

The Blenheim is not especially hard to wrap, but its size and doors add work. Each long side door is one large piece of film, which requires a steady hand and a clean surface. At 191.7 in (4,870 mm), the coupe has long panels that must be laid without wrinkles. Extra time goes into tucking film around the door gaps and trim.

How many generations of the Blenheim does this page cover?

This page covers three generations of the Bristol Blenheim. They are the first generation from 1993 to 1997, the second from 1998 to 1999, and the third from 1999 to 2011. All three share the same coupe body style and the same length.