A BYD G3 wrapped in chrome is a full color change from the factory paint, not a permanent repaint. Choose the finish first, because mirror chrome and satin chrome look different on the compact body. The hatchback and sedan of the first generation share the panel plan, but the sedan uses more film for its extra length. A wrap installer works from the tailgate first, since the film ends at the edge of the rear glass.
The factory paint under a chrome wrap must be clean, smooth and free of deep chips before installation. Any seam in the film follows a body line or panel edge so the chrome looks like a continuous surface. On the BYD G3 the tailgate carries the rear glass, so the film ends at the glass edge and leaves no exposed paint nearby. The installer checks every seam twice, because chrome film shows any overlap more than a matte color would.
A chrome wrap on the BYD G3 is removable when you decide to change it, but the removal must be done with heat and care. Hand wash only after the wrap is installed, because automatic brushes can scratch chrome film. Use a soft mitt and a pH-neutral soap, and dry with a microfiber towel to keep the finish even.


