Wraps by car

Chery B13 wrap

A Chery B13 wrap covers the 2006–2008 minivan with a single generation on offer and uses about 74 ft (22.5 m) of 60-inch (1.52 m) cast vinyl wrap for a full body.

1generations22.5 mof film for a full wrap

Chery B13, first generation, factory photo
Chery B13, first generation. Factory color shown.

Chery B13 wrap colors and ideas

  • Chery B13 black wrap
  • Chery B13 white wrap
  • Chery B13 gray wrap
  • Chery B13 silver wrap
  • Chery B13 red wrap
  • Chery B13 blue wrap
  • Chery B13 green wrap
  • Chery B13 yellow wrap
  • Chery B13 orange wrap
  • Chery B13 purple wrap
  • Chery B13 pink wrap
  • Chery B13 teal wrap
  • Chery B13 brown wrap
  • Chery B13 gold wrap
  • Chery B13 chrome wrap
  • Chery B13 color shift wrap
  • Chery B13 carbon fiber wrap
  • Chery B13 camo and patterned wrap

How much vinyl to wrap a Chery B13

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2008van (5 doors)199.0 in (5,055 mm)about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m)

Chery B13 wrap cost factors

The Chery B13 wrap cost depends on the tall 71.1 in (1,805 mm) body and the 199.0 in (5,055 mm) length, which need a platform and extra labor. The sliding door tracks require precise cutting, and a patterned film uses about 85 ft (26 m) instead of 74 ft (22.5 m). The installer's time for removing mirrors, badges and window trim adds to the final figure.

  • Film for a full wrap: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • A tall body (71.1 in (1,805 mm)): the roof is wrapped from a platform.

Chery B13 wraps by generation

Swipe sideways. Tap a card for the full description.

Chery B13, first generation, factory photo
Factory color shown

2006–2008 Chery B13 van (first generation)

2006–2008van (5 doors)199.0 in (5,055 mm)

The first generation Chery B13 has sliding side doors where the tracks stay bare and decide where the film is cut. The wrap must follow the track line exactly, so the film edge is trimmed against the channel and no vinyl is pushed inside. The door tracks remain visible, while the rest of the panel is covered in one piece.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

A tall body (71.1 in (1,805 mm)): the roof is wrapped from a platform.

Film: about 74 ft (22.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 85 ft (26 m).

Roof, hood, chrome delete and PPF on a Chery B13

A partial wrap on a Chery B13 includes the roof, hood or mirror caps as single panels, and a chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. The sliding door tracks are left bare in every option.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chery B13: body, cut-outs and film

The Chery B13 vinyl wrap is shaped around a five-door van body that is 199.0 in (5,055 mm) long and 71.1 in (1,805 mm) tall. The tall roof and long sides mean the installer works from a platform and uses extra film for the upper panels. A standard 60-inch (1.52 m) roll covers most panels in one piece, but the sliding door tracks force careful cutting.

Chery B13 wrap ideas start with the sliding side doors because the tracks stay bare and decide where the film edge lands. Window trim and badges are removed for a clean chrome delete, while the mirror caps come off for a neat finish. The tall roof is wrapped from a platform so the film can be laid without stretching over the center.

To work out how much vinyl to wrap a Chery B13, compare the single generation from 2006–2008 with the film estimate of 74 ft (22.5 m) for a full wrap. A chrome or patterned film adds about 11 ft (3.5 m) because the pattern must be matched on the long panels. Since every body is a tall five-door van, the roof and sliding tracks are the main areas that use extra material.

Questions about wrapping a Chery B13

How much vinyl does it take to wrap a Chery B13?

It takes about 74 ft (22.5 m) of 60-inch (1.52 m) cast film for a full Chery B13 wrap. A chrome or patterned film needs about 85 ft (26 m) because the pattern has to be matched on the long van panels. The tall roof and sliding door tracks also require extra trimming that uses part of that film.

Are the sliding doors of a Chery B13 wrapped?

The sliding doors of a Chery B13 are wrapped, but the tracks stay bare and decide where the film is cut. The vinyl is trimmed along the edge of the track channel, so the door panel is covered without blocking the sliding mechanism. The track itself remains unpainted metal or plastic.

Can I wrap only the hood or the roof of a Chery B13?

Yes, you can wrap only the hood or the roof of a Chery B13 as a partial wrap. The roof is 71.1 in (1,805 mm) high and is wrapped from a platform, while the hood is a smaller single panel that needs no removal. Mirror caps are also done separately when you want a small color accent.

Is a Chery B13 hard to wrap?

A Chery B13 is harder to wrap than a small car because the roof is 71.1 in (1,805 mm) high and the body is 199.0 in (5,055 mm) long, so the installer works from a platform. The sliding door tracks must be cut precisely, and the long side panels need a helper to lay the film straight. It is still a standard van wrap, but the height and tracks add labor.