Wraps by car

Chery Bonus 3 (E3/A19) wrap

This page covers the Chery Bonus 3 (E3/A19) sedan produced from 2014 to 2016. A full vinyl wrap of this subcompact car takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Patterned or chrome film needs more material, about 64 ft (19.5 m).

1generations16.5 mof film for a full wrap

Chery Bonus 3 (E3/A19), first generation, factory photo
Chery Bonus 3 (E3/A19), first generation. Factory color shown.

Chery Bonus 3 (E3/A19) wrap colors and ideas

  • Bonus 3 (E3/A19) black wrap
  • Bonus 3 (E3/A19) white wrap
  • Bonus 3 (E3/A19) gray wrap
  • Bonus 3 (E3/A19) silver wrap
  • Bonus 3 (E3/A19) red wrap
  • Bonus 3 (E3/A19) blue wrap
  • Bonus 3 (E3/A19) green wrap
  • Bonus 3 (E3/A19) yellow wrap
  • Bonus 3 (E3/A19) orange wrap
  • Bonus 3 (E3/A19) purple wrap
  • Bonus 3 (E3/A19) pink wrap
  • Bonus 3 (E3/A19) teal wrap
  • Bonus 3 (E3/A19) brown wrap
  • Bonus 3 (E3/A19) gold wrap
  • Bonus 3 (E3/A19) chrome wrap
  • Bonus 3 (E3/A19) color shift wrap
  • Bonus 3 (E3/A19) carbon fiber wrap
  • Bonus 3 (E3/A19) camo and patterned wrap

How much vinyl to wrap a Chery Bonus 3 (E3/A19)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–2016sedan (4 doors)175.2 in (4,450 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Bonus 3 (E3/A19) wrap cost factors

Bonus 3 (E3/A19) wrap cost depends on the film type and the number of panels wrapped. A full wrap uses about 54 ft (16.5 m) of standard cast film, while chrome or patterned film raises the amount to about 64 ft (19.5 m). Installation time is also set by the cut-outs for fog lamps and parking sensors. A partial job like a roof wrap uses far less film.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Bonus 3 (E3/A19) wraps by generation

Swipe sideways. Tap a card for the full description.

Chery Bonus 3 (E3/A19), first generation, factory photo
Factory color shown

2014–2016 Bonus 3 (E3/A19) sedan (first generation)

2014–2016sedan (4 doors)175.2 in (4,450 mm)

The first generation Chery Bonus 3 (E3/A19) is a subcompact sedan at 175.2 in (4,450 mm) long. Its four-door layout gives a predictable number of panels: hood, roof, trunk, and four doors. The size means a full wrap needs about 54 ft (16.5 m) of 60-inch (1.52 m) film. With no other body style, the panel count is consistent.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Bonus 3 (E3/A19)

A partial wrap on the Bonus 3 (E3/A19) can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use much less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chery Bonus 3 (E3/A19): body, cut-outs and film

A Chery Bonus 3 (E3/A19) vinyl wrap follows the sedan's four-door body with a length of 175.2 in (4,450 mm). The compact dimensions mean fewer large panels than a longer sedan. The roof, hood, trunk, and all four doors are wrapped as separate sections. This layout gives a clean install without an excessive number of seams.

When planning Bonus 3 (E3/A19) wrap ideas, note that every trim has fog lamps in the front bumper. The installer cuts the film around each lamp for a neat finish. Some trims also have parking sensors in the bumpers, and the film is cut around each sensor. Removing door handles and mirrors usually improves the final look.

This catalog lists one generation, so film quantities stay the same across production years. Anyone counting how much vinyl to wrap a Bonus 3 (E3/A19) needs no extra allowance for body changes. The single body style means one set of measurements covers all cars.

Questions about wrapping a Chery Bonus 3 (E3/A19)

How much vinyl does it take to wrap a Chery Bonus 3 (E3/A19)?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap a Chery Bonus 3 (E3/A19). If you choose chrome or patterned film, plan on about 64 ft (19.5 m).

Can I wrap only the hood or the roof of a Bonus 3 (E3/A19)?

Yes, you can wrap only the hood or the roof of a Bonus 3 (E3/A19). Partial wrap options include the roof, hood, and mirror caps.

Is a Bonus 3 (E3/A19) hard to wrap?

It is not especially hard, but the Bonus 3 (E3/A19) has details that add work. Every trim has fog lamps in the front bumper that need cut-outs. Some trims have parking sensors, so the film is cut around each sensor.

How many generations of the Bonus 3 (E3/A19) does this page cover?

This page covers one generation of the Bonus 3 (E3/A19), produced from 2014 to 2016.