Wraps by car

Chery Bonus (A13) wrap

This page covers the Chery Bonus (A13) vinyl wrap in its single generation, the 2011–2016 sedan. A full wrap of this subcompact body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises that estimate to about 61 ft (18.5 m).

1generations16 mof film for a full wrap

Chery Bonus (A13), first generation, factory photo
Chery Bonus (A13), first generation. Factory color shown.

Chery Bonus (A13) wrap colors and ideas

  • Bonus (A13) black wrap
  • Bonus (A13) white wrap
  • Bonus (A13) gray wrap
  • Bonus (A13) silver wrap
  • Bonus (A13) red wrap
  • Bonus (A13) blue wrap
  • Bonus (A13) green wrap
  • Bonus (A13) yellow wrap
  • Bonus (A13) orange wrap
  • Bonus (A13) purple wrap
  • Bonus (A13) pink wrap
  • Bonus (A13) teal wrap
  • Bonus (A13) brown wrap
  • Bonus (A13) gold wrap
  • Bonus (A13) chrome wrap
  • Bonus (A13) color shift wrap
  • Bonus (A13) carbon fiber wrap
  • Bonus (A13) camo and patterned wrap

How much vinyl to wrap a Chery Bonus (A13)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2016sedan (4 doors)168.1 in (4,269 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Bonus (A13) wrap cost factors

The Bonus (A13) wrap cost depends on film choice, the condition of the paint, and the amount of disassembly. A cast vinyl wrap for the 168.1 in (4,269 mm) sedan takes about 52 ft (16 m). Chrome or patterned film increases the material to about 61 ft (18.5 m). Labor for cut-outs around parking sensors or fog lamps adds time.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Bonus (A13) wraps by generation

Swipe sideways. Tap a card for the full description.

Chery Bonus (A13), first generation, factory photo
Factory color shown

2011–2016 Bonus (A13) sedan (first generation)

2011–2016sedan (4 doors)168.1 in (4,269 mm)

The first generation Chery Bonus (A13) was built from 2011 to 2016. Panels may be original or repainted after those years, so a test spot comes before a full wrap. Good paint adhesion helps the film lay flat and hold its edge. An installer will check each panel before starting.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Bonus (A13)

Smaller jobs on the Chery Bonus (A13) include a partial wrap for the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) can be applied as clear film on the front end. These options change only part of the body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chery Bonus (A13): body, cut-outs and film

The Chery Bonus (A13) vinyl wrap starts with one body style: a four-door sedan. Its length of 168.1 in (4,269 mm) places it in the subcompact class. The modest panel sizes mean installers can often cut film with less waste. A full wrap still needs careful measurement around the bumpers and doors.

On the Bonus (A13) wrap ideas include planning for bumper features. Some trims have parking sensors in the bumpers, so the film is cut around each sensor. Fog lamps on some trims need cut-outs in the bumper film. Those details keep the wrap neat and functional.

When counting how much vinyl to wrap a Bonus (A13), the single generation simplifies planning. The 2011–2016 sedan uses the same body shell throughout the run. The film estimate of about 52 ft (16 m) applies to the standard cast vinyl. Add about 9 ft (2.5 m) more for chrome or patterned film.

Questions about wrapping a Chery Bonus (A13)

How much vinyl does it take to wrap a Chery Bonus (A13)?

It takes about 52 ft (16 m) of 60-inch (1.52 m) cast film to wrap a Chery Bonus (A13) sedan. That is the estimate for the 2011–2016 body. If the film is chrome or patterned, the amount rises to about 61 ft (18.5 m).

Can I wrap only the hood or the roof of a Bonus (A13)?

Yes, you can wrap only the hood or the roof of a Bonus (A13). A partial wrap can cover the roof, hood, or mirror caps. A chrome delete on window trim and badges is another partial option. Clear paint protection film (PPF) on the front end is also available.

Is a Bonus (A13) hard to wrap?

The Bonus (A13) is not especially hard to wrap, but two features add work. Some trims have parking sensors that require cutting the film around each sensor. Fog lamps on some trims also need cut-outs in the bumper film. The subcompact size can make film handling a bit easier.

How many generations of the Bonus (A13) does this page cover?

This page covers one generation of the Chery Bonus (A13), sold from 2011 to 2016. The catalog has no earlier or later generations for this model.