Wraps by car

Chery CrossEastar (B14) wrap

The Chery CrossEastar (B14) wrap page covers the first generation of this mid-size van, produced from 2008 to 2013. A full vinyl wrap of its five-door body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 79 ft (24 m).

1generations20.5 mof film for a full wrap

Chery CrossEastar (B14), first generation, factory photo
Chery CrossEastar (B14), first generation. Factory color shown.

Chery CrossEastar (B14) wrap colors and ideas

  • CrossEastar (B14) black wrap
  • CrossEastar (B14) white wrap
  • CrossEastar (B14) gray wrap
  • CrossEastar (B14) silver wrap
  • CrossEastar (B14) red wrap
  • CrossEastar (B14) blue wrap
  • CrossEastar (B14) green wrap
  • CrossEastar (B14) yellow wrap
  • CrossEastar (B14) orange wrap
  • CrossEastar (B14) purple wrap
  • CrossEastar (B14) pink wrap
  • CrossEastar (B14) teal wrap
  • CrossEastar (B14) brown wrap
  • CrossEastar (B14) gold wrap
  • CrossEastar (B14) chrome wrap
  • CrossEastar (B14) color shift wrap
  • CrossEastar (B14) carbon fiber wrap
  • CrossEastar (B14) camo and patterned wrap

How much vinyl to wrap a Chery CrossEastar (B14)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2013van (5 doors)183.5 in (4,662 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

CrossEastar (B14) wrap cost factors

CrossEastar (B14) wrap cost is driven by the size of the van, the film type and the labor on the sliding doors and bumpers. The first-generation body is 183.5 in (4,662 mm) long, so a full wrap uses about 67 ft (20.5 m) of film. Cast film and chrome or patterned films require different cutting and finishing work.

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

CrossEastar (B14) wraps by generation

Swipe sideways. Tap a card for the full description.

Chery CrossEastar (B14), first generation, factory photo
Factory color shown

2008–2013 CrossEastar (B14) van (first generation)

2008–2013van (5 doors)183.5 in (4,662 mm)

The first-generation Chery CrossEastar (B14) has sliding side doors that require the tracks to stay bare, which affects the wrap design. The film is cut along the door tracks, so the edges must be tucked and sealed cleanly. This generation was produced from 2008 to 2013 as a five-door van.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on a CrossEastar (B14)

A partial wrap on a CrossEastar (B14) can cover the roof, hood or mirror caps without the film amount of a full wrap. A chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end guards the hood, bumper and mirror caps from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chery CrossEastar (B14): body, cut-outs and film

The Chery CrossEastar (B14) vinyl wrap has to handle a body that is 183.5 in (4,662 mm) long, so installers plan the panel layout carefully. The five-door van shape gives large, mostly flat sides that suit wide film sections. The sliding side doors must be wrapped without covering the door tracks, which stay bare.

CrossEastar (B14) wrap ideas often start with a full color change, but the sliding door tracks remain uncovered and guide the cut lines. The door handles, mirrors and badges are removed for a clean finish around these parts. The front bumper needs careful relief cuts to follow the deep contours below the headlights.

How much vinyl to wrap a CrossEastar (B14) depends on the film type as well as the body size. A standard full wrap of the first-generation van needs about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. Choosing chrome or patterned film adds waste, bringing the estimate to about 79 ft (24 m).

Questions about wrapping a Chery CrossEastar (B14)

How much vinyl does it take to wrap a Chery CrossEastar (B14)?

A full wrap of a Chery CrossEastar (B14) takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan on about 79 ft (24 m) because of extra waste. This estimate covers the first-generation five-door van body.

Are the sliding doors of a CrossEastar (B14) wrapped?

No, the sliding doors of a CrossEastar (B14) are not fully wrapped because the door tracks stay bare. The film is cut along the tracks, and the door panels around them are covered. This keeps the tracks functional and the wrap edges protected.

Can I wrap only the hood or the roof of a CrossEastar (B14)?

Yes, you can wrap only the hood or the roof of a CrossEastar (B14). A partial wrap on this van often covers the roof, hood or mirror caps. A chrome delete covers the window trim and badges. Paint protection film (PPF) can also be applied to just the front end.

Is a CrossEastar (B14) hard to wrap?

A CrossEastar (B14) is not the easiest van to wrap because of its sliding door tracks and the 183.5 in (4,662 mm) body length. The film must be cut along the door tracks, which adds careful trimming work. The large side panels and front bumper contours also need extra time and skill.