Wraps by car

Chery Kimo (A1) wrap

A Chery Kimo (A1) wrap covers this five-door mini hatchback, built from 2008 to 2015 in one generation. A full color change wrap of the newest body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 56 ft (17 m).

1generations14.5 mof film for a full wrap

Chery Kimo (A1), first generation, factory photo
Chery Kimo (A1), first generation. Factory color shown.

Chery Kimo (A1) wrap colors and ideas

  • Kimo (A1) black wrap
  • Kimo (A1) white wrap
  • Kimo (A1) gray wrap
  • Kimo (A1) silver wrap
  • Kimo (A1) red wrap
  • Kimo (A1) blue wrap
  • Kimo (A1) green wrap
  • Kimo (A1) yellow wrap
  • Kimo (A1) orange wrap
  • Kimo (A1) purple wrap
  • Kimo (A1) pink wrap
  • Kimo (A1) teal wrap
  • Kimo (A1) brown wrap
  • Kimo (A1) gold wrap
  • Kimo (A1) chrome wrap
  • Kimo (A1) color shift wrap
  • Kimo (A1) carbon fiber wrap
  • Kimo (A1) camo and patterned wrap

How much vinyl to wrap a Chery Kimo (A1)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2015hatchback (5 doors)145.7 in (3,700 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Kimo (A1) wrap cost factors

Kimo (A1) wrap cost depends on film type, design complexity, and surface preparation. A short body of 145.7 in (3,700 mm) with five doors calls for moderate material and labor compared with longer cars. Full wraps in chrome or patterned film need about 56 ft (17 m), which raises the film cost.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Kimo (A1) wraps by generation

Swipe sideways. Tap a card for the full description.

Chery Kimo (A1), first generation, factory photo
Factory color shown

2008–2015 Kimo (A1) hatchback (first generation)

2008–2015hatchback (5 doors)145.7 in (3,700 mm)

The first-generation Chery Kimo (A1) hatchback has roof rails on every trim, so the installer must decide before the wrap begins. The rails either come off before the roof is wrapped, or the film is cut along them. Leaving them on saves time but leaves the roof seams visible at the rail edges.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Kimo (A1)

For a Kimo (A1) chrome delete, wrap shops cover the window trim and badges with black film. A partial wrap can cover the roof, hood, and mirror caps instead of the whole body. Paint protection film (PPF) is also an option: a clear film on the front end that keeps stone chips off the bumper and hood.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Chery Kimo (A1): body, cut-outs and film

A Chery Kimo (A1) vinyl wrap has to fit a compact hatchback body that is 145.7 in (3,700 mm) long. Five doors and a tall roof mean the vinyl installer handles larger side panels than on a two-door car. The short length still makes the Kimo (A1) a smaller job than a mid-size sedan.

Kimo (A1) wrap ideas can include a two-tone look, but the tailgate needs careful work because the rear glass is part of it. Film ends at the edge of the glass, so the installer cannot stretch vinyl behind a hidden frame. This makes the tailgate the main area where the design must be planned in sections.

To know how much vinyl to wrap a Kimo (A1), you need to check the body shape only once, since there is one generation. The figure of 48 ft (14.5 m) of 60-inch (1.52 m) film assumes a full color change with no roof rails left in place. Removing the roof rails adds a little labor but does not change the film count.

Questions about wrapping a Chery Kimo (A1)

How much vinyl does it take to wrap a Chery Kimo (A1)?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap a Chery Kimo (A1) in a full color change. Chrome or patterned film needs about 56 ft (17 m).

Can I wrap only the hood or the roof of a Kimo (A1)?

Yes, a roof, hood, or mirror cap wrap is a standard partial job on a Kimo (A1). The roof is wrapped only after the roof rails are removed or the film is cut along them.

Is a Kimo (A1) hard to wrap?

The Kimo (A1) is a small car, but it adds work in two places: the tailgate with the rear glass in it, and roof rails on every trim. The film ends at the glass edge on the tailgate, and the rails must be removed or trimmed around.

How many generations of the Kimo (A1) does this page cover?

This page covers one generation of the Kimo (A1), produced from 2008 to 2015.