A Traverse wrapped in yellow starts with the finish: matte, satin, gloss or a special effect. Gloss is the closest to fresh factory paint with the deepest shine. Matte and satin flatten the reflections and give the SUV a softer, solid look. The finish changes how a color change reads from ten steps away.
Factory paint is the base for any wrap, so the panels must be clean and smooth before film goes on. Rock chips, deep scratches and failing clear coat show through and can make the film lift. Seams are planned where the body panels meet, but a smart installer hides them along edges and trim lines. On a large SUV the seams are fewer than you expect because the film is cut from a 60-inch roll.
A removable wrap is expected to peel off later, but it still needs normal care. Hand wash the Traverse with a soft sponge and a mild automotive soap. Avoid automatic car washes with brushes, and never use a pressure washer close to the film edges. The film is removable, but how easily it comes off depends on the paint underneath and how it was stored.

