Wraps by car

Chevrolet Traverse wrap

The Chevrolet Traverse wrap page covers the three generations of this three-row SUV, from 2008 to today. The newest body takes about 69 feet (21 meters) of 60-inch (1.52 m) cast film for a full color change. Chrome or patterned film raises the estimate to about 87 feet (26.5 meters). These figures are the starting point for planning a vinyl wrap on a Traverse.

3generations

Chevrolet Traverse, third generation, factory photo
Chevrolet Traverse, third generation. Factory color shown.

Chevrolet Traverse wrap colors and ideas

  • Traverse black wrap
  • Traverse white wrap
  • Traverse gray wrap
  • Traverse silver wrap
  • Traverse red wrap
  • Traverse blue wrap
  • Traverse green wrap
  • Traverse yellow wrap
  • Traverse orange wrap
  • Traverse purple wrap
  • Traverse pink wrap
  • Traverse teal wrap
  • Traverse brown wrap
  • Traverse gold wrap
  • Traverse chrome wrap
  • Traverse color shift wrap
  • Traverse carbon fiber wrap
  • Traverse camo and patterned wrap

How much vinyl to wrap a Chevrolet Traverse

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowSUV (5 doors)——
2017–2024SUV (5 doors)204.3 in (5,189 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)
2008–2018SUV (5 doors)203.7 in (5,174 mm) to 205.0 in (5,207 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

Traverse wrap cost factors

Traverse wrap cost depends on the film's type, the body's size, and the trim details. A full wrap uses about 69 ft (21 m) of vinyl, and chrome film raises the amount to 87 ft (26.5 m). Roof rails and parking sensors add labor for removal and cut-outs. A taller body from 69.9 in (1,775 mm) to 70.7 in (1,795 mm) means the roof is wrapped from a platform.

  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Traverse wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Traverse, third generation, factory photo
Factory color shown

2023–now Traverse SUV (third generation)

2023–nowSUV (5 doors)

The third generation of the Chevrolet Traverse has roof rails that come off before a roof wrap, or the film is cut along them. Removing the rails gives a cleaner edge under the rail feet, while cutting along them saves time. Every trim of this generation includes roof rails, so the choice affects every whole-body wrap. The tailgate glass and parking sensors also need cut-outs on this body.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Chevrolet Traverse, second generation, factory photo
Factory color shown

2017–2024 Traverse SUV (second generation)

2017–2024SUV (5 doors)204.3 in (5,189 mm)

The second generation of the Traverse covers cars from 2017 to 2024, overlapping with the newer body from 2023 to 2024. For a car built in those overlapping years, check which body it is before ordering film or planning the work. The 2021 restyle changed the front and rear ends, so the bumper wrap may differ. A shop can identify the generation from the vehicle identification number or the body details.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (70.7 in (1,795 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Chevrolet Traverse, first generation, factory photo
Factory color shown

2008–2018 Traverse SUV (first generation)

2008–2018SUV (5 doors)203.7 in (5,174 mm) to 205.0 in (5,207 mm)

The first generation of the Traverse runs from 2008 to 2018, and paint age matters on a car of these years. Panels may be original or repainted, and a test spot comes before a full wrap to check adhesion. The body ranges from 203.7 in (5,174 mm) to 205.0 in (5,207 mm) in length, with roof rails and parking sensors on every trim. Fog lamps and cameras add more cut-outs on many cars.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (69.9 in (1,775 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a Traverse

A partial wrap on a Chevrolet Traverse covers the roof, hood, or mirror caps, and a chrome delete changes the look of the window trim and badges. Paint protection film (PPF) is a clear option for the front end. These smaller jobs protect the paint or change the color without wrapping the whole SUV. The tall roof is often wrapped from a platform, even for a partial job.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Traverse: body, cut-outs and film

The Chevrolet Traverse vinyl wrap is shaped by the SUV's five-door body and its size, which ranges from 203.7 in (5,174 mm) to 205.0 in (5,207 mm) across generations. The large panels mean the film is laid in sections and stretched over flat surfaces. The tall roof adds area and requires working from a platform. The tailgate with the rear glass is wrapped as one piece up to the edge of the glass.

Traverse wrap ideas include moving parts and sensors that need careful planning. Parking sensors require cut-outs in the bumper film, and cameras in the body need precise openings. Roof rails come off before wrapping or the film is cut along them. Some trims add a sunroof, fog lamps, or a styling kit that creates more separate pieces.

How much vinyl to wrap a Traverse depends on the generation and the film's pattern. The second and first generations use about 69 ft (21 m) of standard cast film, while the third generation's estimate is based on its similar size. Chrome or patterned film requires about 87 ft (26.5 m) to match the pattern. A wrapper checks the exact body and the film's width before cutting.

Questions about wrapping a Chevrolet Traverse

How much vinyl does it take to wrap a Chevrolet Traverse?

It takes about 69 feet (21 meters) of 60-inch (1.52 m) cast film to wrap the newest Chevrolet Traverse body. Chrome or patterned film raises the amount to about 87 feet (26.5 meters). These figures assume a full wrap with no spoilers or extra styling parts. A shop measures the exact body before cutting the film.

Can the roof of a Traverse be wrapped?

Yes, the roof of a Traverse can be wrapped, and the film is cut along the roof rails or the rails come off first. The roof is tall, from 69.9 in (1,775 mm) to 70.7 in (1,795 mm) depending on generation, so a platform or ladder is needed. A sunroof on some trims means the film is cut around the opening.

Can I wrap only the hood or the roof of a Traverse?

Yes, you can wrap only the hood or only the roof of a Traverse as a partial wrap. The roof needs the rails removed or the film cut along them, and a platform because of the SUV's height. The hood is a large panel best covered with two people to avoid wrinkles. A partial wrap on the roof and hood is a common way to change the look without a full wrap.

Is a Traverse hard to wrap?

A Traverse is not the hardest vehicle to wrap, but its size and details add work. The body is about 204 in (5,182 mm) long and 70 in (1,778 mm) tall, so the roof is wrapped from a platform. Parking sensors, cameras, and roof rails need removal or precise cut-outs. Some trims add fog lamps, a sunroof, or a styling kit that means more separate pieces.