Wraps by car

Chevrolet Trax wrap

This page covers the Chevrolet Trax vinyl wrap for all four generations of the SUV. The newest body, the fourth generation, has been built since 2022. A full wrap of that body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

4generations18.5 mof film for a full wrap

Chevrolet Trax, fourth generation, factory photo
Chevrolet Trax, fourth generation. Factory color shown.

Chevrolet Trax wrap colors and ideas

  • Trax black wrap
  • Trax white wrap
  • Trax gray wrap
  • Trax silver wrap
  • Trax red wrap
  • Trax blue wrap
  • Trax green wrap
  • Trax yellow wrap
  • Trax orange wrap
  • Trax purple wrap
  • Trax pink wrap
  • Trax teal wrap
  • Trax brown wrap
  • Trax gold wrap
  • Trax chrome wrap
  • Trax color shift wrap
  • Trax carbon fiber wrap
  • Trax camo and patterned wrap

How much vinyl to wrap a Chevrolet Trax

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2022–nowSUV (5 doors)178.6 in (4,537 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2012–2023SUV (5 doors)167.2 in (4,247 mm) to 167.6 in (4,257 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1998–2004SUV, open-top SUV (2 or 5 doors)148.8 in (3,780 mm) to 159.8 in (4,059 mm)about 43 ft (13 m) for the open-top SUV to 54 ft (16.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m)
1989–1998SUV, open-top SUV (3 or 5 doors)142.5 in (3,620 mm) to 158.7 in (4,030 mm)about 39 ft (12 m) for the open-top SUV to 54 ft (16.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Trax wrap cost factors

Trax wrap cost depends on the size of the body, the film type, and the amount of disassembly. The fourth-generation Trax is the largest at 178.6 in (4,537 mm) and needs about 61 ft (18.5 m) of film. Chrome or patterned film raises material use to about 69 ft (21 m). Cut-outs for sensors, cameras, and roof rails add labor time.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.

Trax wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Trax, fourth generation, factory photo
Factory color shown

2022–now Trax SUV (fourth generation)

2022–nowSUV (5 doors)178.6 in (4,537 mm)

The fourth-generation Chevrolet Trax, produced from 2022 onward, has roof rails on some trims. The roof rails come off before the roof is wrapped, or the film is cut along them. This choice affects the finish and the labor time.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Chevrolet Trax, third generation, factory photo
Factory color shown

2012–2023 Trax SUV (third generation)

2012–2023SUV (5 doors)167.2 in (4,247 mm) to 167.6 in (4,257 mm)

The third-generation Chevrolet Trax was produced from 2012 to 2023, overlapping with the fourth generation in 2022 and 2023. Owners of a Trax from those years must check which body style they have. The two generations have different lengths and film needs.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Chevrolet Trax, second generation, factory photo
Factory color shown

1998–2004 Trax SUV, open-top SUV (second generation)

1998–2004SUV, open-top SUV (2 or 5 doors)148.8 in (3,780 mm) to 159.8 in (4,059 mm)

The second-generation Chevrolet Trax from 1998 to 2004 came as an SUV and an open-top SUV. On the open top, a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the open-top SUV to 54 ft (16.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 62 ft (19 m).

Chevrolet Trax, first generation, factory photo
Factory color shown

1989–1998 Trax SUV, open-top SUV (first generation)

1989–1998SUV, open-top SUV (3 or 5 doors)142.5 in (3,620 mm) to 158.7 in (4,030 mm)

The first-generation Chevrolet Trax from 1989 to 1998 is the oldest body on this page. On a car of these years, panels may be original or repainted, and paint condition varies. A test spot comes before a full wrap to check adhesion.

Open-top SUV body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 39 ft (12 m) for the open-top SUV to 54 ft (16.5 m) for the SUV, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Trax

A partial wrap on a Chevrolet Trax can cover the roof, hood, or mirror caps. Trax chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to protect against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Trax: body, cut-outs and film

The Chevrolet Trax vinyl wrap is shaped by the body styles and sizes of each generation. The fourth-generation SUV is 178.6 in (4,537 mm) long, while the third generation is 167.2 in (4,247 mm) to 167.6 in (4,257 mm) long. The first and second generations offered an open-top SUV, which wraps differently from the closed body. These differences change how much film is needed and how it is applied.

Trax wrap ideas start with the parts that need cut-outs or removal. Every trim of the 2022–now body has parking sensors and cameras, so the film is cut around each sensor and lens. Roof rails on some trims come off before the roof is wrapped or the film is cut along them. The tailgate has the rear glass in it, and the film ends at the edge of the glass.

How much vinyl to wrap a Trax depends on the generation and body style. The newest fourth-generation body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The third generation needs about 57 ft (17.5 m), and the first and second generations need from about 39 ft (12 m) to 54 ft (16.5 m) depending on style. Chrome or patterned film adds about 8 to 10 ft (2.5 to 3 m) to each estimate.

Questions about wrapping a Chevrolet Trax

How much vinyl does it take to wrap a Chevrolet Trax?

About 61 ft (18.5 m) of vinyl is needed for a full wrap of the newest Chevrolet Trax. That estimate uses 60-inch (1.52 m) cast film on the fourth-generation body.

Can I wrap only the hood or the roof of a Trax?

Yes, you can wrap only the hood or the roof of a Trax. A partial wrap on this car often covers the roof, hood, or mirror caps.

Is a Trax hard to wrap?

A Trax is not hard to wrap, but several features add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass. Parking sensors, cameras, and roof rails on some trims require careful cut-outs or removal.

How many generations of the Trax does this page cover?

This page covers four generations of the Chevrolet Trax. They range from the first generation produced from 1989 to 1998 to the fourth generation produced from 2022 onward.