Wraps by car

Chevrolet Spin wrap

This page covers the Chevrolet Spin wrap with vinyl wrap, a five-door minivan produced from 2012 to now. The catalog describes its single generation, including the 2018 and 2024 restyles. A full wrap of the newest body takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film.

1generations19.5 mof film for a full wrap

Chevrolet Spin, first generation, factory photo
Chevrolet Spin, first generation. Factory color shown.

Chevrolet Spin wrap colors and ideas

  • Spin black wrap
  • Spin white wrap
  • Spin gray wrap
  • Spin silver wrap
  • Spin red wrap
  • Spin blue wrap
  • Spin green wrap
  • Spin yellow wrap
  • Spin orange wrap
  • Spin purple wrap
  • Spin pink wrap
  • Spin teal wrap
  • Spin brown wrap
  • Spin gold wrap
  • Spin chrome wrap
  • Spin color shift wrap
  • Spin carbon fiber wrap
  • Spin camo and patterned wrap

How much vinyl to wrap a Chevrolet Spin

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowvan (5 doors)171.7 in (4,360 mm) to 171.7 in (4,361 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Spin wrap cost factors

Spin wrap cost depends on the film type and the surface area of this 171.7 in (4,360 mm) minivan. The sliding side doors add labor because the tracks stay bare and the film must be cut along them. A partial job such as the hood or roof costs less than a full wrap, while chrome delete on the window trim and badges is a separate line item.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2018, 2024: bumpers and lights differ between the versions, and so do the film cuts.

Spin wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Spin, first generation, factory photo
Factory color shown

2012–now Spin van (first generation)

2012–nowvan (5 doors)171.7 in (4,360 mm) to 171.7 in (4,361 mm)

The first generation Chevrolet Spin is the only body in the catalog and has been built from 2012 to now with restyles in 2018 and 2024. Its sliding side doors have tracks that stay bare, so the film is cut along the track edges on every year. These cuts are the same on all first-generation Spins.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Spin

A partial wrap on the Chevrolet Spin can cover the roof, hood, or mirror caps. Spin chrome delete means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Spin: body, cut-outs and film

The Chevrolet Spin vinyl wrap uses a body length of 171.7 in (4,360 mm), which sets the film area. The five-door van shape has a tall roof and large side panels. Those panels are the main surfaces the installer covers with film.

Spin wrap ideas have to work around the sliding side doors, whose tracks stay bare and decide where the film is cut. The door handles, mirrors, and badges must be removed or cut out for a clean edge. The roof rails on this minivan also need careful trimming.

To know how much vinyl to wrap a Spin, count the differences between the 2018 and 2024 restyles and the original 2012 body. The overall length stays 171.7 in (4,360 mm) to 171.7 in (4,361 mm) across all years. A color change wrap with chrome or patterned film needs about 74 ft (22.5 m) instead of the standard 64 ft (19.5 m).

Questions about wrapping a Chevrolet Spin

How much vinyl does it take to wrap a Chevrolet Spin?

A full wrap takes about 64 ft (19.5 m) of 60-inch (1.52 m) cast film for the Chevrolet Spin. If you choose chrome or patterned film for a color change wrap, allow about 74 ft (22.5 m). The estimate covers the minivan body as measured at 171.7 in (4,360 mm).

Are the sliding doors of a Spin wrapped?

Yes, the sliding doors of a Spin are wrapped, but the tracks stay bare. The film is cut along the track edges so the doors can still slide. This is a standard detail on the first-generation Spin built from 2012 to now.

Which years of the Spin take the same film cuts?

All years of the first generation, 2012 to now, take the same film cuts. The restyles in 2018 and 2024 changed the look, but the body size and sliding door tracks are unchanged. An installer can use the same cutting patterns on any Spin.

Can I wrap only the hood or the roof of a Spin?

Yes, you can wrap only the hood or the roof of a Spin. A partial wrap can also include the mirror caps. For the front end, paint protection film (PPF) is a clear option, while chrome delete covers the window trim and badges.