Wraps by car

Chevrolet Orlando wrap

The Chevrolet Orlando wrap page covers the two generations of this minivan. The second generation ran from 2018 to 2023 and the first from 2010 to 2018. A full vinyl wrap of the newest body takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film.

2generations20.5 mof film for a full wrap

Chevrolet Orlando, second generation, factory photo
Chevrolet Orlando, second generation. Factory color shown.

Chevrolet Orlando wrap colors and ideas

  • Orlando black wrap
  • Orlando white wrap
  • Orlando gray wrap
  • Orlando silver wrap
  • Orlando red wrap
  • Orlando blue wrap
  • Orlando green wrap
  • Orlando yellow wrap
  • Orlando orange wrap
  • Orlando purple wrap
  • Orlando pink wrap
  • Orlando teal wrap
  • Orlando brown wrap
  • Orlando gold wrap
  • Orlando chrome wrap
  • Orlando color shift wrap
  • Orlando carbon fiber wrap
  • Orlando camo and patterned wrap

How much vinyl to wrap a Chevrolet Orlando

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2018–2023van (5 doors)184.4 in (4,684 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)
2010–2018van (5 doors)183.1 in (4,652 mm)about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m)

Orlando wrap cost factors

The Orlando wrap cost depends on the size of the vehicle, the film chosen, and the condition of the paint. The Orlando is 184.4 in (4,684 mm) long or 183.1 in (4,652 mm) depending on generation, so a full wrap uses about 67 ft (20.5 m) of film. Chrome or patterned film increases the amount to about 79 ft (24 m).

  • Film for a full wrap: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Orlando wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Orlando, second generation, factory photo
Factory color shown

2018–2023 Orlando van (second generation)

2018–2023van (5 doors)184.4 in (4,684 mm)

The second generation Chevrolet Orlando from 2018 to 2023 has sliding side doors with tracks that stay bare. The film is cut along the door tracks, which creates a clean edge where the vinyl meets the channel. This generation is 184.4 in (4,684 mm) long and needs about 67 ft (20.5 m) of 60-inch (1.52 m) film for a full wrap.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Chevrolet Orlando, first generation, factory photo
Factory color shown

2010–2018 Orlando van (first generation)

2010–2018van (5 doors)183.1 in (4,652 mm)

The first generation Chevrolet Orlando from 2010 to 2018 requires attention to paint age before wrapping. On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap to check adhesion. This generation also has sliding door tracks that stay bare, and some trims have parking sensors and fog lamps needing cut-outs.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 67 ft (20.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 79 ft (24 m).

Roof, hood, chrome delete and PPF on an Orlando

A partial wrap on a Chevrolet Orlando can cover the roof, hood, and mirror caps. Orlando chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another option for the front end of the Orlando.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Orlando: body, cut-outs and film

The Chevrolet Orlando vinyl wrap is sized for a five-door van body. The latest Orlando is 184.4 in (4,684 mm) long, while the first generation is 183.1 in (4,652 mm). These dimensions place the Orlando in the minivan class, and a full wrap uses about 67 ft (20.5 m) of 60-inch (1.52 m) film.

Orlando wrap ideas must include the sliding side doors and the door tracks. The tracks stay bare, and the film is cut along them on both generations. On some first-generation trims, parking sensors and fog lamps require cut-outs in the bumper film.

How much vinyl to wrap an Orlando depends on the generation and the film type. Both generations need about 67 ft (20.5 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, plan for about 79 ft (24 m) because of the extra material needed for matching.

Questions about wrapping a Chevrolet Orlando

How much vinyl does it take to wrap a Chevrolet Orlando?

It takes about 67 ft (20.5 m) of 60-inch (1.52 m) cast film to wrap a Chevrolet Orlando. This figure applies to the newest body, which is 184.4 in (4,684 mm) long. If you choose chrome or patterned film, plan for about 79 ft (24 m).

Are the sliding doors of an Orlando wrapped?

Yes, the sliding doors of an Orlando are wrapped, but the tracks stay bare. The film is cut along the door tracks so the doors can slide without interference. This applies to both generations of the Orlando.

Can I wrap only the hood or the roof of an Orlando?

Yes, you can wrap only the hood or the roof of an Orlando. These are common partial wrap jobs along with mirror caps. Chrome delete on the window trim and badges is another option.

Is an Orlando hard to wrap?

The Orlando is not especially hard to wrap, but it has some areas that add work. The sliding door tracks must stay bare, so the film is cut along them. The size of the van means a full wrap takes about 67 ft (20.5 m) of film, and some trims have sensors and fog lamps that need cut-outs.