Wraps by car

Chevrolet S-10 Pickup wrap

This page covers the Chevrolet S-10 Pickup wrap for the three generations produced since 1981. A full wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the estimate rises to about 64 ft (19.5 m).

3generations17 mof film for a full wrap

Chevrolet S-10 Pickup, third generation, factory photo
Chevrolet S-10 Pickup, third generation. Factory color shown.

Chevrolet S-10 Pickup wrap colors and ideas

  • S-10 Pickup black wrap
  • S-10 Pickup white wrap
  • S-10 Pickup gray wrap
  • S-10 Pickup silver wrap
  • S-10 Pickup red wrap
  • S-10 Pickup blue wrap
  • S-10 Pickup green wrap
  • S-10 Pickup yellow wrap
  • S-10 Pickup orange wrap
  • S-10 Pickup purple wrap
  • S-10 Pickup pink wrap
  • S-10 Pickup teal wrap
  • S-10 Pickup brown wrap
  • S-10 Pickup gold wrap
  • S-10 Pickup chrome wrap
  • S-10 Pickup color shift wrap
  • S-10 Pickup carbon fiber wrap
  • S-10 Pickup camo and patterned wrap

How much vinyl to wrap a Chevrolet S-10 Pickup

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2012–nowpickup (2 or 4 doors)176.8 in (4,490 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)
1993–2012pickup (2 or 4 doors)190.0 in (4,826 mm) to 205.0 in (5,207 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
1981–1993pickup (2 doors)——

S-10 Pickup wrap cost factors

The S-10 Pickup wrap cost depends on the generation, the body size, and the film type. The newest truck is 176.8 in (4,490 mm) long, while older trucks run to 205.0 in (5,207 mm), so more film is needed. A chrome or patterned film adds about 8 ft (2.5 m) to the estimate.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: pickup (2 or 4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Restyled in 2016, 2020, 2024: bumpers and lights differ between the versions, and so do the film cuts.

S-10 Pickup wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet S-10 Pickup, third generation, factory photo
Factory color shown

2012–now S-10 Pickup pickup (third generation)

2012–nowpickup (2 or 4 doors)176.8 in (4,490 mm)

For the third generation Chevrolet S-10 Pickup, the cab and the bed are wrapped as two separate bodies. The inside of the bed stays bare because film is not applied there. This truck is 176.8 in (4,490 mm) long and needs about 56 ft (17 m) of cast film, or 64 ft (19.5 m) for chrome or patterned film.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Chevrolet S-10 Pickup, second generation, factory photo
Factory color shown

1993–2012 S-10 Pickup pickup (second generation)

1993–2012pickup (2 or 4 doors)190.0 in (4,826 mm) to 205.0 in (5,207 mm)

The second generation Chevrolet S-10 Pickup, built from 1993 to 2012, may have original or repainted panels at this age. A test spot is applied before a full wrap to check paint adhesion. Lengths range from 190.0 in (4,826 mm) to 205.0 in (5,207 mm), so film needs vary with the bed length.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Chevrolet S-10 Pickup, first generation, factory photo
Factory color shown

1981–1993 S-10 Pickup pickup (first generation)

1981–1993pickup (2 doors)

The first generation Chevrolet S-10 Pickup is a two-door pickup, so the side panels are large and need careful film handling. Each side door is wrapped as one piece, reducing seams but increasing the size of each panel. The cab and bed remain two separate wrap areas.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Two long side doors: each door is one large piece of film.

Roof, hood, chrome delete and PPF on an S-10 Pickup

A partial wrap on a Chevrolet S-10 Pickup can cover the roof, hood, and mirror caps. An S-10 Pickup chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet S-10 Pickup: body, cut-outs and film

The Chevrolet S-10 Pickup vinyl wrap follows the truck body closely on every generation. The newest truck is 176.8 in (4,490 mm) long and comes as a pickup with two or four doors. Earlier trucks are longer, up to 205.0 in (5,207 mm), so they need more film.

S-10 Pickup wrap ideas start with the cab and the bed as two separate film areas. The inside of the bed is not wrapped on any generation. On the first generation, each long side door is one large piece of film.

To work out how much vinyl to wrap an S-10 Pickup, compare the body lengths and door counts. The newest generation, built from 2012 forward, is shorter than the second generation and keeps the same four-door layout. The first generation, with only two doors, has the largest side panels but fewer door cut-outs.

Questions about wrapping a Chevrolet S-10 Pickup

How much vinyl does it take to wrap a Chevrolet S-10 Pickup?

A full wrap of a Chevrolet S-10 Pickup takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the estimate is about 64 ft (19.5 m). This figure applies to the third generation, the newest body.

Is the bed of an S-10 Pickup wrapped?

No, the bed of an S-10 Pickup is not wrapped on the inside. The cab and the outside of the bed are wrapped as two separate bodies, but the inside bed surface stays bare.

Which years of the S-10 Pickup take the same film cuts?

The S-10 Pickup film cuts follow the three generations: 1981–1993, 1993–2012, and 2012–now. The third generation received restyles in 2016, 2020, and 2024, so panels changed within those years. The first and second generations kept their body shape throughout.

Can I wrap only the hood or the roof of an S-10 Pickup?

Yes, you can wrap only the hood or the roof of an S-10 Pickup. A partial wrap commonly covers the roof, hood, and mirror caps as separate pieces.