Wraps by car

Chevrolet Spark wrap

This page covers the Chevrolet Spark wrap across four generations and gives the vinyl wrap figures for the newest body. The current fourth generation is a mini hatchback sold from 2015 to now. A full wrap of this body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

4generations14.5 mof film for a full wrap

Chevrolet Spark, fourth generation, factory photo
Chevrolet Spark, fourth generation. Factory color shown.

Chevrolet Spark wrap colors and ideas

  • Spark black wrap
  • Spark white wrap
  • Spark gray wrap
  • Spark silver wrap
  • Spark red wrap
  • Spark blue wrap
  • Spark green wrap
  • Spark yellow wrap
  • Spark orange wrap
  • Spark purple wrap
  • Spark pink wrap
  • Spark teal wrap
  • Spark brown wrap
  • Spark gold wrap
  • Spark chrome wrap
  • Spark color shift wrap
  • Spark carbon fiber wrap
  • Spark camo and patterned wrap

How much vinyl to wrap a Chevrolet Spark

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–nowhatchback (5 doors)143.9 in (3,655 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2010–2016hatchback (5 doors)143.3 in (3,640 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)
2005–2010hatchback (5 doors)137.6 in (3,495 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)
2000–2005hatchback (5 doors)137.6 in (3,495 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Spark wrap cost factors

Spark wrap cost depends on the size of the car, the film choice, and the body details to work around. The current body is 143.9 in (3,655 mm) long and a full wrap uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. Some trims have a sunroof or parking sensors, and every trim has cameras that need extra cut-out time.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Spark wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Spark, fourth generation, factory photo
Factory color shown

2015–now Spark hatchback (fourth generation)

2015–nowhatchback (5 doors)143.9 in (3,655 mm)

The fourth generation Chevrolet Spark got a restyling in 2018. The bumpers and lights changed on the updated car. Film cut for the 2015–2018 version does not fit the 2018–now version. The body length stayed at 143.9 in (3,655 mm).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Chevrolet Spark, third generation, factory photo
Factory color shown

2010–2016 Spark hatchback (third generation)

2010–2016hatchback (5 doors)143.3 in (3,640 mm)

The third generation Chevrolet Spark was built from 2010 to 2016, and it is not the only Spark from 2015 and 2016. The fourth generation also started in 2015, so a car from those two years could be either body. The owner of a 2015 or 2016 Spark should check which body it is before ordering film. This third generation is 143.3 in (3,640 mm) long.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Chevrolet Spark, second generation, factory photo
Factory color shown

2005–2010 Spark hatchback (second generation)

2005–2010hatchback (5 doors)137.6 in (3,495 mm)

The second generation Chevrolet Spark was made from 2005 to 2010, so paint age matters before a wrap. Panels on a car of these years may be original or repainted. A test spot is wise before a full wrap to check that the adhesive releases cleanly. The body is 137.6 in (3,495 mm) long and takes about 46 ft (14 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Chevrolet Spark, first generation, factory photo
Factory color shown

2000–2005 Spark hatchback (first generation)

2000–2005hatchback (5 doors)137.6 in (3,495 mm)

The first generation Chevrolet Spark is the smallest body in this catalog. Its length is 137.6 in (3,495 mm), and the five-door hatchback shape has a tailgate with the rear glass in it. A full wrap uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. The small roof and hood mean fewer panels to work around than on the newer bodies.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Spark

A partial wrap on a Spark can be just the roof, hood, or mirror caps. Spark chrome delete covers the window trim and badges with black film. Paint protection film (PPF) on the front end is a clear film that protects the bumper, hood, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Spark: body, cut-outs and film

Every Chevrolet Spark vinyl wrap has to follow the five-door hatchback shape and its compact size. The newest body is 143.9 in (3,655 mm) long, so most installers can reach every panel without a ladder. The earlier M300 body from 2010–2016 is nearly the same size at 143.3 in (3,640 mm). The two older M200 and M150 bodies are shorter at 137.6 in (3,495 mm).

Spark wrap ideas should account for the parts that need cut-outs or can be removed for a neat edge. On the current body, the tailgate has the rear glass in it, so the film stops at the glass edge. Some trims have a sunroof, parking sensors, or fog lamps, and the film is cut around those openings. Every trim has cameras in the body, so each lens needs a cut-out too.

When you count how much vinyl to wrap a Spark, the four generations do not all use the same amount. The first and second generation bodies need about 46 ft (14 m) of 60-inch (1.52 m) cast film. The third and fourth generation bodies need about 48 ft (14.5 m) of the same film. Chrome or patterned film adds roughly 4 ft (1.5 m) to either figure.

Questions about wrapping a Chevrolet Spark

How much vinyl does it take to wrap a Chevrolet Spark?

A Chevrolet Spark takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap of the newest body. That figure covers the 2015–now fourth generation. Chrome or patterned film adds about 8 ft (2.5 m) to the total.

Can the roof of a Spark be wrapped?

Yes, the roof of a Spark can be wrapped. The roof is a small part of this mini car, so a roof wrap is a short job. On some trims of the current body, a sunroof means the film is cut around its opening.

Which years of the Spark take the same film cuts?

The years that take the same film cuts are 2010–2016 for the third generation and 2015–now for the fourth generation, but they overlap in 2015 and 2016. The fourth generation was restyled in 2018, so the 2015–2018 and 2018–now versions of that body need different bumper and light cuts. The first and second generations do not share cuts with any other body.

Can I wrap only the hood or the roof of a Spark?

Yes, you can wrap only the hood or the roof of a Spark. A partial wrap covers just the roof, hood, or mirror caps. A chrome delete covers the window trim and badges, and paint protection film goes on the front end.