Wraps by car

Chevrolet Sail wrap

This page covers the Chevrolet Sail wrap across all three generations of the subcompact sedan and its variants. The Sail has been produced from 2005 until now, with a sedan, hatchback, and wagon body over the years. A full vinyl wrap of the newest Sail sedan takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

3generations16 mof film for a full wrap

Chevrolet Sail, third generation, factory photo
Chevrolet Sail, third generation. Factory color shown.

Chevrolet Sail wrap colors and ideas

  • Sail black wrap
  • Sail white wrap
  • Sail gray wrap
  • Sail silver wrap
  • Sail red wrap
  • Sail blue wrap
  • Sail green wrap
  • Sail yellow wrap
  • Sail orange wrap
  • Sail purple wrap
  • Sail pink wrap
  • Sail teal wrap
  • Sail brown wrap
  • Sail gold wrap
  • Sail chrome wrap
  • Sail color shift wrap
  • Sail carbon fiber wrap
  • Sail camo and patterned wrap

How much vinyl to wrap a Chevrolet Sail

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowsedan (4 doors)169.3 in (4,300 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m)
2010–2014hatchback, sedan (4 or 5 doors)163.5 in (4,152 mm)about 46 ft (14 m) for the sedan to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
2005–2009sedan, wagon (4 or 5 doors)169.3 in (4,300 mm)about 52 ft (16 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Sail wrap cost factors

Sail wrap cost depends on the film brand, the body style, and how much of the car is wrapped. The first generation wagon uses up to 59 ft (18 m) of film, while the second generation sedan uses as little as 46 ft (14 m). Extra work like wrapping the tailgate edge or removing badges adds labor time. The final figure comes from the installer's hourly rate and the shop's film pricing.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).
  • Body: sedan (4 doors).

Sail wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Sail, third generation, factory photo
Factory color shown

2014–now Sail sedan (third generation)

2014–nowsedan (4 doors)169.3 in (4,300 mm)

The third generation Chevrolet Sail is a four-door sedan that measures 169.3 in (4,300 mm) in length. Its panel count is standard for a subcompact sedan: hood, roof, trunk, four doors, and two bumpers. The film estimate is about 52 ft (16 m) of 60-inch (1.52 m) cast film. The sedan's smooth sides and simple curves make for a predictable wrap layout.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 62 ft (19 m).

Chevrolet Sail, second generation, factory photo
Factory color shown

2010–2014 Sail hatchback, sedan (second generation)

2010–2014hatchback, sedan (4 or 5 doors)163.5 in (4,152 mm)

The second generation Chevrolet Sail came as a hatchback or a sedan, and the body style decides the panel plan and the film amount. The hatchback has a shorter rear overhang and a tailgate with the glass in it, so the film ends at the glass edge. The sedan has a separate trunk lid that is wrapped as its own panel. Film use ranges from about 46 ft (14 m) for the sedan to 48 ft (14.5 m) for the hatchback.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the sedan to 48 ft (14.5 m) for the hatchback, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Chevrolet Sail, first generation, factory photo
Factory color shown

2005–2009 Sail sedan, wagon (first generation)

2005–2009sedan, wagon (4 or 5 doors)169.3 in (4,300 mm)

On a first generation Chevrolet Sail from 2005–2009, paint condition varies widely because the car is now older. Panels may be original or repainted, and a test spot of film on each panel shows whether the surface is sound before a full wrap. The sedan is 169.3 in (4,300 mm) long and the wagon is longer, so the wagon needs more film. Any repainted area must be cured and adhesion-tested before the wrap proceeds.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) for the sedan to 59 ft (18 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Sail

A partial wrap on a Chevrolet Sail can cover the roof, hood, or mirror caps as separate jobs. A Sail chrome delete changes the bright window trim and badges to black film. Paint protection film is another option, with a clear film applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Sail: body, cut-outs and film

A Chevrolet Sail vinyl wrap uses the car's compact dimensions to keep the job straightforward. The newest sedan is 169.3 in (4,300 mm) long, and the second generation is shorter at 163.5 in (4,152 mm). The Sail has four doors and a standard sedan shape, so the wrap breaks down into familiar panels. The size means a single installer can handle most panels without extra help.

Sail wrap ideas start with the tailgate on the first and second generation models. The tailgate has the rear glass set into it, so the film ends at the edge of the glass instead of covering the whole panel. Door handles, mirror caps, and badges are removed for a clean edge. The sedan's roof and pillars are straightforward single-piece sections.

If you need to know how much vinyl to wrap a Sail, the amount changes with the car's generation and body style. A third generation sedan uses about 52 ft (16 m) of film, while a second generation hatchback uses about 48 ft (14.5 m). The first generation wagon is the largest job at about 59 ft (18 m). The difference comes from the extra roof and rear panels on the wagon and the shorter tail on the hatchback.

Questions about wrapping a Chevrolet Sail

How much vinyl does it take to wrap a Chevrolet Sail?

A full wrap of the newest Chevrolet Sail takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. That figure covers the third generation sedan from 2014 to now. Chrome or patterned film adds extra material, so plan on about 62 ft (19 m) for those finishes.

Can I wrap only the hood or the roof of a Sail?

Yes, you can wrap only the hood or the roof of a Sail. A partial wrap covers the roof, hood, or mirror caps as separate jobs. The installer will cut the film to the panel edges and tuck the excess under the seams.

Is a Sail hard to wrap?

The Sail is not an especially hard car to wrap, but the tailgate glass adds a step on the first and second generation models. On those cars the film ends at the edge of the rear glass, which requires a careful cut and a tucked edge. The third generation sedan has no such complication, so it is the simplest of the three.

How many generations of the Sail does this page cover?

This page covers three generations of the Chevrolet Sail. The first generation ran from 2005 to 2009, the second from 2010 to 2014, and the third from 2014 to now.