Wraps by car

Chevrolet Camaro wrap

A Chevrolet Camaro wrap covers the sixth-generation sports car from 2015 to 2025. This page catalogues vinyl wrap for six generations of the Camaro. A full wrap of the newest body takes about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe. Use 60-inch (1.52 m) cast film for these cars.

6generations16 mof film for a full wrap

Chevrolet Camaro, sixth generation, factory photo
Chevrolet Camaro, sixth generation. Factory color shown.

Chevrolet Camaro wrap colors and ideas

  • Camaro black wrap
  • Camaro white wrap
  • Camaro gray wrap
  • Camaro silver wrap
  • Camaro red wrap
  • Camaro blue wrap
  • Camaro green wrap
  • Camaro yellow wrap
  • Camaro orange wrap
  • Camaro purple wrap
  • Camaro pink wrap
  • Camaro teal wrap
  • Camaro brown wrap
  • Camaro gold wrap
  • Camaro chrome wrap
  • Camaro color shift wrap
  • Camaro carbon fiber wrap
  • Camaro camo and patterned wrap

How much vinyl to wrap a Chevrolet Camaro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2025convertible, coupe (2 doors)188.3 in (4,783 mm) to 188.4 in (4,786 mm)about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
2009–2016convertible, coupe (2 doors)190.4 in (4,836 mm) to 190.6 in (4,841 mm)about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)
1992–2002convertible, coupe (2 doors)193.2 in (4,908 mm)about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)
1982–1992convertible, coupe (2 doors)192.0 in (4,877 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1970–1981coupe (2 doors)188.0 in (4,775 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)
1967–1969convertible, coupe (2 doors)184.7 in (4,691 mm) to 189.0 in (4,800 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Camaro wrap cost factors

Camaro wrap cost depends on the size of the body and the film finish. A sixth-generation coupe is 188.4 in (4,786 mm) long and takes about 52 ft (16 m) of film. The convertible uses slightly less film at about 51 ft (15.5 m). Chrome or patterned film raises the film amount to up to 66 ft (20 m).

  • Film for a full wrap: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2018: bumpers and lights differ between the versions, and so do the film cuts.

Camaro wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Camaro, sixth generation, factory photo
Factory color shown

2015–2025 Camaro convertible, coupe (sixth generation)

2015–2025convertible, coupe (2 doors)188.3 in (4,783 mm) to 188.4 in (4,786 mm)

The sixth-generation Camaro runs from 2015 to 2025 and includes convertible and coupe styles. The fabric top is not wrapped, so the vinyl ends where the top begins. A folding hard top would be wrapped as panels of its own. The 2018 restyling changed some body details but the film estimate remains about 51 ft (15.5 m) to 52 ft (16 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Chevrolet Camaro, fifth generation, factory photo
Factory color shown

2009–2016 Camaro convertible, coupe (fifth generation)

2009–2016convertible, coupe (2 doors)190.4 in (4,836 mm) to 190.6 in (4,841 mm)

The fifth-generation Camaro covers 2009 to 2016, overlapping the sixth generation from 2015 to 2016. An owner of a 2015 or 2016 car must check which body it is. This generation was restyled in 2013 and has a similar film estimate of 51 ft (15.5 m) to 52 ft (16 m). Convertible tops are not wrapped on this body either.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Chevrolet Camaro, fourth generation, factory photo
Factory color shown

1992–2002 Camaro convertible, coupe (fourth generation)

1992–2002convertible, coupe (2 doors)193.2 in (4,908 mm)

The fourth-generation Camaro spans 1992 to 2002 and was restyled in 1998. Bumpers and lights changed at the restyling, so film cut for one version does not fit the other. This body takes about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the coupe. Chrome or patterned film on this generation needs up to about 61 ft (18.5 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) for the convertible to 54 ft (16.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Chevrolet Camaro, third generation, factory photo
Factory color shown

1982–1992 Camaro convertible, coupe (third generation)

1982–1992convertible, coupe (2 doors)192.0 in (4,877 mm)

The third-generation Camaro from 1982 to 1992 came as a convertible or coupe. The body style decides the panel plan and the film amount. A full wrap of this generation uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film for the third generation runs to about 59 ft (18 m).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Chevrolet Camaro, second generation, factory photo
Factory color shown

1970–1981 Camaro coupe (second generation)

1970–1981coupe (2 doors)188.0 in (4,775 mm)

The second-generation Camaro was built from 1970 to 1981 as a coupe only. Paint on a car of these years may be original or repainted. A test spot comes before a full wrap to check adhesion and paint condition. This body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film.

Two long side doors: each door is one large piece of film.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Chevrolet Camaro, first generation, factory photo
Factory color shown

1967–1969 Camaro convertible, coupe (first generation)

1967–1969convertible, coupe (2 doors)184.7 in (4,691 mm) to 189.0 in (4,800 mm)

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Camaro

A partial wrap on a Camaro can cover the roof, hood, or mirror caps. Camaro chrome delete covers the window trim and badges with black film. Paint protection film (PPF) in clear film goes on the front end. These jobs use less film than a full wrap and focus on high-impact areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Camaro: body, cut-outs and film

A Chevrolet Camaro vinyl wrap follows the car's two body styles. The coupe and convertible are both two-door cars with long side panels. The sixth generation is 188.3 in (4,783 mm) to 188.4 in (4,786 mm) long. The earlier fifth generation is longer at 190.4 in (4,836 mm) to 190.6 in (4,841 mm).

Camaro wrap ideas must account for sensors and cameras on every trim. Parking sensors in the bumpers need a cut-out around each sensor. Cameras in the body also need the film cut around each lens. Some trims have fog lamps in the front bumper that require cut-outs. Convertible tops are not wrapped, so the film ends where the fabric top begins.

How much vinyl to wrap a Camaro depends on the generation and body style. A sixth-generation coupe uses about 52 ft (16 m) of film, while the convertible uses about 51 ft (15.5 m). Chrome or patterned film on the sixth generation can need up to about 66 ft (20 m). Older fourth-generation coupes need about 54 ft (16.5 m).

Questions about wrapping a Chevrolet Camaro

How much vinyl does it take to wrap a Chevrolet Camaro?

It takes about 51 ft (15.5 m) for the convertible to 52 ft (16 m) for the coupe to wrap a Chevrolet Camaro. That figure is for the sixth-generation body using 60-inch (1.52 m) cast film. Chrome or patterned film can require up to about 66 ft (20 m).

Is the top of a Camaro wrapped?

No, the top of a Camaro convertible is not wrapped. The fabric top is left unwrapped and the film ends where the top begins. Only a folding hard top would be wrapped as panels of its own.

Can the roof of a Camaro be wrapped?

Yes, the roof of a Camaro can be wrapped. For a coupe the roof is a straightforward panel. Some trims have a sunroof, and the roof film is cut around its opening.

Which years of the Camaro take the same film cuts?

The sixth generation (2015–2025) and fifth generation (2009–2016) have their own film cuts. The fourth generation changed in 1998, so cuts differ before and after the restyling. The third generation changed in 1985 and has its own cuts. The second generation (1970–1981) is a separate body with its own film patterns.