Wraps by car

Chevrolet TrailBlazer wrap

The Chevrolet TrailBlazer wrap page covers three generations: 2020–now, 2012–2020, and 2001–2009. A full wrap of the newest body takes about 59 ft (18 m) of 60-inch (1.52 m) cast film, or about 67 ft (20.5 m) for chrome or patterned film.

3generations18 mof film for a full wrap

Chevrolet TrailBlazer, third generation, factory photo
Chevrolet TrailBlazer, third generation. Factory color shown.

Chevrolet TrailBlazer wrap colors and ideas

  • TrailBlazer black wrap
  • TrailBlazer white wrap
  • TrailBlazer gray wrap
  • TrailBlazer silver wrap
  • TrailBlazer red wrap
  • TrailBlazer blue wrap
  • TrailBlazer green wrap
  • TrailBlazer yellow wrap
  • TrailBlazer orange wrap
  • TrailBlazer purple wrap
  • TrailBlazer pink wrap
  • TrailBlazer teal wrap
  • TrailBlazer brown wrap
  • TrailBlazer gold wrap
  • TrailBlazer chrome wrap
  • TrailBlazer color shift wrap
  • TrailBlazer carbon fiber wrap
  • TrailBlazer camo and patterned wrap

How much vinyl to wrap a Chevrolet TrailBlazer

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)173.5 in (4,407 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)
2012–2020SUV (5 doors)192.0 in (4,878 mm) to 192.4 in (4,887 mm)about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m)
2001–2009SUV (5 doors)207.8 in (5,278 mm)about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m)

TrailBlazer wrap cost factors

The TrailBlazer wrap cost depends on the film type, the generation, and the condition of the paint. A larger body like the first generation needs more film and more labor than the third generation. Chrome or patterned film raises the film amount by 8 to 20 ft (2.4 to 6 m) compared with standard cast film. Paint correction or rust repair before wrapping adds labor time.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2023: bumpers and lights differ between the versions, and so do the film cuts.

TrailBlazer wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet TrailBlazer, third generation, factory photo
Factory color shown

2020–now TrailBlazer SUV (third generation)

2020–nowSUV (5 doors)173.5 in (4,407 mm)

The third generation Chevrolet TrailBlazer was restyled for 2023. The bumpers and lights changed in 2023, so film cut for one version does not fit the other. Installers must check the build date to order the correct kit.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a two-tone body from the factory: the roof is a second color, and the wrap either keeps that split or covers it.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Chevrolet TrailBlazer, second generation, factory photo
Factory color shown

2012–2020 TrailBlazer SUV (second generation)

2012–2020SUV (5 doors)192.0 in (4,878 mm) to 192.4 in (4,887 mm)

The second generation Chevrolet TrailBlazer comes with roof rails on every trim. The roof rails must come off before the roof is wrapped, or the film is cut along them. Removing them gives a cleaner seam and allows the film to wrap under the rail feet.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (72.9 in (1,852 mm)): the roof is wrapped from a platform.

Film: about 69 ft (21 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 89 ft (27 m).

Chevrolet TrailBlazer, first generation, factory photo
Factory color shown

2001–2009 TrailBlazer SUV (first generation)

2001–2009SUV (5 doors)207.8 in (5,278 mm)

The first generation Chevrolet TrailBlazer is from 2001–2009, and paint age matters. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. Old paint can be brittle, so the installer will check adhesion before wrapping.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (77.0 in (1,956 mm)): the roof is wrapped from a platform.

Film: about 77 ft (23.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 87 ft (26.5 m).

Roof, hood, chrome delete and PPF on a TrailBlazer

The Chevrolet TrailBlazer can receive a partial wrap instead of a full wrap. A partial wrap can cover the roof, hood, and mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet TrailBlazer: body, cut-outs and film

The TrailBlazer has always been a five-door SUV, so a vinyl wrap covers the same main panels on every generation. The third generation is 173.5 in (4,407 mm) long, making it the smallest body and the least film to install. The second generation ranges from 192.0 in (4,878 mm) to 192.4 in (4,887 mm) long. The first generation is the largest at 207.8 in (5,278 mm) long.

TrailBlazer wrap ideas must account for cut-outs around parking sensors and cameras on every trim of the newest body. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Some trims have a sunroof, roof rails, or a factory two-tone body that the wrap can keep or cover. Fog lamps on some trims require cut-outs in the front bumper film.

How much vinyl to wrap a TrailBlazer depends on the generation, because body length changed over the years. The third generation uses about 59 ft (18 m) of standard cast film, while the second generation needs about 69 ft (21 m). The first generation is the longest and needs about 77 ft (23.5 m) of standard cast film. Chrome or patterned film adds about 8 to 20 ft (2.4 to 6 m) depending on the generation.

Questions about wrapping a Chevrolet TrailBlazer

How much vinyl does it take to wrap a Chevrolet TrailBlazer?

A full wrap of a 2020–now Chevrolet TrailBlazer takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the amount is about 67 ft (20.5 m).

Can the roof of a TrailBlazer be wrapped?

Yes, the roof of a Chevrolet TrailBlazer can be wrapped. On some trims with a sunroof, the film is cut around its opening. Roof rails are removed first or the film is cut along them.

Which years of the TrailBlazer take the same film cuts?

The first generation (2001–2009) changed in 2005, so film cuts differ between early and late versions. The second generation (2012–2020) changed in 2016, and the third generation (2020–now) changed in 2023. Within each period before and after the restyle, the cuts are the same.

Can I wrap only the hood or the roof of a TrailBlazer?

Yes, you can wrap only the hood or the roof of a TrailBlazer. These are part of a partial wrap that also includes mirror caps. Other partial jobs are a chrome delete for window trim and badges, or clear paint protection film on the front end.