Wraps by car

Chevrolet Sonic wrap

The Chevrolet Sonic wrap page covers the current subcompact in its one generation sold from 2011 to now. A full vinyl wrap takes about 52 ft (16 m) for the hatchback or 54 ft (16.5 m) for the sedan in 60-inch (1.52 m) cast film. The car is offered as a hatchback and a sedan with 4 or 5 doors.

1generations16.5 mof film for a full wrap

Chevrolet Sonic, first generation, factory photo
Chevrolet Sonic, first generation. Factory color shown.

Chevrolet Sonic wrap colors and ideas

  • Sonic black wrap
  • Sonic white wrap
  • Sonic gray wrap
  • Sonic silver wrap
  • Sonic red wrap
  • Sonic blue wrap
  • Sonic green wrap
  • Sonic yellow wrap
  • Sonic orange wrap
  • Sonic purple wrap
  • Sonic pink wrap
  • Sonic teal wrap
  • Sonic brown wrap
  • Sonic gold wrap
  • Sonic chrome wrap
  • Sonic color shift wrap
  • Sonic carbon fiber wrap
  • Sonic camo and patterned wrap

How much vinyl to wrap a Chevrolet Sonic

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–nowhatchback, sedan (4 or 5 doors)159.0 in (4,039 mm) to 173.9 in (4,416 mm)about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Sonic wrap cost factors

Sonic wrap cost depends on the film grade, the wrap shop's work rate and the condition of the paint. A full color change on the sedan uses more material than the hatchback, about 54 ft (16.5 m) versus 52 ft (16 m). Removing door handles, lights and the tailgate trim adds labor time. If some trims have a sunroof or body cameras, the installer spends extra time cutting around those parts.

  • Film for a full wrap: about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: hatchback, sedan (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Restyled in 2016: bumpers and lights differ between the versions, and so do the film cuts.

Sonic wraps by generation

Swipe sideways. Tap a card for the full description.

Chevrolet Sonic, first generation, factory photo
Factory color shown

2011–now Sonic hatchback, sedan (first generation)

2011–nowhatchback, sedan (4 or 5 doors)159.0 in (4,039 mm) to 173.9 in (4,416 mm)

The first generation of the Chevrolet Sonic was built from 2011 to now under the T300 code. In 2016 the car was restyled with new bumpers and lights, so film templates made for earlier cars do not fit the later ones. Owners counting film for a wrap should check the production year before ordering a pre-cut kit.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have cameras in the body: the film is cut around each lens.

Film: about 52 ft (16 m) for the hatchback to 54 ft (16.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Sonic

A partial wrap on the Sonic covers the roof, hood or mirror caps with a contrast film. Sonic chrome delete replaces the bright window trim and badges with black film for a different look. Paint protection film (PPF) goes on the front end as a clear shield against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Chevrolet Sonic: body, cut-outs and film

A Chevrolet Sonic vinyl wrap has to follow the short, tall subcompact body with its creased fenders and roof rails. The hatchback needs less film than the sedan because the tailgate ends the body sooner and the rear glass sits inside it. The sedan is longer at up to 173.9 in (4,416 mm) and carries its film farther along the rear deck. Both styles use flat panels that a cast film can be laid onto with less stretching.

Sonic wrap ideas must include the tailgate of the hatchback where the film ends at the edge of the rear glass. Some trims have a sunroof, so the roof film is cut around its opening and tucked under the seal. On some trims, cameras sit in the body and the film is cut around each lens to keep the view clear. Door handles, mirrors and lights come off for a clean install without visible seams.

To know how much vinyl to wrap a Sonic, check the restyling in 2016 before ordering film. The bumpers and lights changed in that year, so film cut for one version does not fit the other. The body length stayed between 159.0 in (4,039 mm) for the hatchback and 173.9 in (4,416 mm) for the sedan, so the film estimate stays at 52 to 54 ft (16 to 16.5 m). A chrome or patterned film adds up to about 64 ft (19.5 m) because the pattern must be matched.

Questions about wrapping a Chevrolet Sonic

How much vinyl does it take to wrap a Chevrolet Sonic?

It takes about 52 ft (16 m) to wrap a Chevrolet Sonic hatchback and 54 ft (16.5 m) for the sedan in 60-inch (1.52 m) cast film. Chrome or patterned film can run up to about 64 ft (19.5 m) because the pattern has to be matched at the seams.

Can the roof of a Sonic be wrapped?

Yes, the roof of a Sonic can be wrapped. On some trims a sunroof is present, so the film is cut around its opening and the edges are tucked under the seal.

Which years of the Sonic take the same film cuts?

The same film cuts fit a Sonic built from 2011 to 2015, and another set fits a Sonic built from 2016 to now. The 2016 restyling changed the bumpers and lights, so film cut for one version does not fit the other.

Which Sonic body takes more film?

The Sonic sedan takes more film than the hatchback. The sedan needs about 54 ft (16.5 m) while the hatchback needs about 52 ft (16 m) in 60-inch (1.52 m) film.