Wraps by car

Feifan ER6 wrap

The Feifan ER6 wrap page covers the first generation of this electric sedan, produced from 2021 to now. A full vinyl wrap of the ER6 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan on about 67 ft (20.5 m).

1generations17.5 mof film for a full wrap

Feifan ER6, first generation, factory photo
Feifan ER6, first generation. Factory color shown.

Feifan ER6 wrap colors and ideas

  • Feifan ER6 black wrap
  • Feifan ER6 white wrap
  • Feifan ER6 gray wrap
  • Feifan ER6 silver wrap
  • Feifan ER6 red wrap
  • Feifan ER6 blue wrap
  • Feifan ER6 green wrap
  • Feifan ER6 yellow wrap
  • Feifan ER6 orange wrap
  • Feifan ER6 purple wrap
  • Feifan ER6 pink wrap
  • Feifan ER6 teal wrap
  • Feifan ER6 brown wrap
  • Feifan ER6 gold wrap
  • Feifan ER6 chrome wrap
  • Feifan ER6 color shift wrap
  • Feifan ER6 carbon fiber wrap
  • Feifan ER6 camo and patterned wrap

How much vinyl to wrap a Feifan ER6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowsedan (4 doors)186.0 in (4,724 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Feifan ER6 wrap cost factors

The Feifan ER6 wrap cost depends on the amount of film, the labor, and the film type you choose. A full wrap uses about 57 ft (17.5 m) of cast film, or 67 ft (20.5 m) for chrome or patterned film. The sedan body has standard panels, so the labor is similar to other four-door cars of this size.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).
  • Body: sedan (4 doors).
  • Electric car: the charge port door is wrapped as a small piece of its own.

Feifan ER6 wraps by generation

Swipe sideways. Tap a card for the full description.

Feifan ER6, first generation, factory photo
Factory color shown

2021–now Feifan ER6 sedan (first generation)

2021–nowsedan (4 doors)186.0 in (4,724 mm)

The first generation Feifan ER6 is a sedan with four doors and a length of 186.0 in (4,724 mm). That size means a full wrap takes about 57 ft (17.5 m) of 60-inch film, with more needed for chrome or patterned film. The number of panels is typical for a sedan: hood, roof, trunk, four doors, fenders, bumpers, and mirrors.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Feifan ER6

For a partial wrap on the Feifan ER6, you can cover the roof, hood, or mirror caps separately. A chrome delete replaces the bright window trim and badges with black film. Paint protection film (PPF) on the front end is a clear film that guards the hood, bumper, and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Feifan ER6: body, cut-outs and film

A Feifan ER6 vinyl wrap is a straightforward job because the car is a four-door sedan with a length of 186.0 in (4,724 mm). The sedan shape means the roof, hood, and trunk are separate panels that can be wrapped individually or as part of a full wrap. The size is moderate, so a full wrap needs the film amount given in the lead.

Feifan ER6 wrap ideas start with the electric charge port door, which is wrapped as a small piece of its own. The door handles and mirrors are wrapped in place, while the badges can be removed and reinstalled. The bumper covers and rocker panels stay on the car during a wrap.

When you figure how much vinyl to wrap a Feifan ER6, you only need to consider the first generation because that is the only generation in the catalog. The size and panel count are the same for every ER6 from 2021 onward. There are no earlier or later generations to compare.

Questions about wrapping a Feifan ER6

How much vinyl does it take to wrap a Feifan ER6?

A full wrap of a Feifan ER6 takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you use chrome or patterned film, you need about 67 ft (20.5 m) because of extra material for matching and trimming.

Can I wrap only the hood or the roof of a Feifan ER6?

Yes, you can wrap only the hood or the roof of a Feifan ER6. A partial wrap can cover the roof, hood, or mirror caps, and a chrome delete is another option for smaller jobs.

Is a Feifan ER6 hard to wrap?

A Feifan ER6 is not especially hard to wrap, but the charge port door adds one extra piece that must be wrapped separately. As an electric car, you need to be careful around the charge port area. The sedan body has standard panels, so the main work is the same as any car of this size.

How many generations of the Feifan ER6 does this page cover?

This page covers one generation of the Feifan ER6, the first generation produced from 2021 to now.