Wraps by car

Feifan F7 wrap

This page covers the Feifan F7 wrap for the single generation in production since 2023. A full wrap of the liftback takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl wrap. The same body style needs roughly 74 ft (22.5 m) of chrome or patterned film.

1generations20 mof film for a full wrap

Feifan F7, first generation, factory photo
Feifan F7, first generation. Factory color shown.

Feifan F7 wrap colors and ideas

  • Feifan F7 black wrap
  • Feifan F7 white wrap
  • Feifan F7 gray wrap
  • Feifan F7 silver wrap
  • Feifan F7 red wrap
  • Feifan F7 blue wrap
  • Feifan F7 green wrap
  • Feifan F7 yellow wrap
  • Feifan F7 orange wrap
  • Feifan F7 purple wrap
  • Feifan F7 pink wrap
  • Feifan F7 teal wrap
  • Feifan F7 brown wrap
  • Feifan F7 gold wrap
  • Feifan F7 chrome wrap
  • Feifan F7 color shift wrap
  • Feifan F7 carbon fiber wrap
  • Feifan F7 camo and patterned wrap

How much vinyl to wrap a Feifan F7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2023–nowliftback (5 doors)196.9 in (5,000 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Feifan F7 wrap cost factors

Feifan F7 wrap cost depends on the area of film, the number of panels and the film type. The full body needs about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl, or about 74 ft (22.5 m) of chrome or patterned film. A partial job on the roof or hood uses less material, so the quotes come in lower. The charge port door and the tailgate cut-outs add time to the job.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Feifan F7 wraps by generation

Swipe sideways. Tap a card for the full description.

Feifan F7, first generation, factory photo
Factory color shown

2023–now Feifan F7 liftback (first generation)

2023–nowliftback (5 doors)196.9 in (5,000 mm)

The first generation Feifan F7 is a liftback with five doors and a length of 196.9 in (5,000 mm). The tailgate includes the rear glass, so the film area stops at the edge of the glass. The roof and side panels are large, but a standard roll of 60-inch (1.52 m) film covers them in single pieces. About 66 ft (20 m) of cast vinyl wraps the whole body without the extra waste for a chrome finish.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Feifan F7

A partial wrap on the Feifan F7 covers the roof, hood or mirror caps only. Chrome delete is another option, with the window trim and badges covered in black film. Paint protection film (PPF) goes on the front end as a clear film over the bumper, hood and fenders. Each of these jobs uses less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Feifan F7: body, cut-outs and film

The Feifan F7 vinyl wrap follows the long liftback shape of this electric car. At 196.9 in (5,000 mm), the body has large roof and side panels that use film efficiently. The five-door layout adds a tailgate, but no separate trunk lid. A wrap kit counts the hood, fenders, doors, quarter panels, bumpers, rockers and the tailgate.

Feifan F7 wrap ideas start with the tailgate, where the rear glass runs to the edge of the panel. The film ends at the edge of the glass, so the installer cuts that line cleanly. The charge port door is wrapped as a small piece of its own, removed from the surrounding quarter panel. Door handles, mirror caps and badges are also wrapped off the car for a neat finish.

When you work out how much vinyl to wrap a Feifan F7, this page covers one generation only. The 2023–now liftback has one body length of 196.9 in (5,000 mm). A newer edition of the model would change the film estimate, but no other generation exists yet. Installers buy film for the current body and add a little for waste on the long panels.

Questions about wrapping a Feifan F7

How much vinyl does it take to wrap a Feifan F7?

A full wrap of a Feifan F7 takes about 66 ft (20 m) of 60-inch (1.52 m) cast vinyl. If you choose chrome or patterned film, the estimate is about 74 ft (22.5 m). The liftback body is long, but the five-door layout keeps the panel count manageable.

Can I wrap only the hood or the roof of a Feifan F7?

Yes, you can wrap only the hood or the roof of a Feifan F7. A partial wrap on those panels or the mirror caps is a smaller job than a full color change wrap. The roof is long and flat, which makes it a straightforward panel for vinyl film.

Is a Feifan F7 hard to wrap?

The Feifan F7 is not hard to wrap, but a few details add work. The tailgate has the rear glass in it, so the film must end at the edge of the glass. The charge port door is wrapped as a small piece of its own. At 196.9 in (5,000 mm) long, the body has large panels that need careful handling.

How many generations of the Feifan F7 does this page cover?

This page covers one generation of the Feifan F7, the first generation from 2023 to now. There is no second generation in the catalog. All film estimates on this page refer to that single liftback body.