Wraps by car

Feifan Marvel R wrap

A Feifan Marvel R wrap covers every painted panel of this electric SUV in vinyl wrap. The first generation has run from 2021 to now, so this page covers one body. A full wrap of that body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film, or about 70 ft (21.5 m) with chrome or patterned film.

1generations19 mof film for a full wrap

Feifan Marvel R, first generation, factory photo
Feifan Marvel R, first generation. Factory color shown.

Feifan Marvel R wrap colors and ideas

  • Marvel R black wrap
  • Marvel R white wrap
  • Marvel R gray wrap
  • Marvel R silver wrap
  • Marvel R red wrap
  • Marvel R blue wrap
  • Marvel R green wrap
  • Marvel R yellow wrap
  • Marvel R orange wrap
  • Marvel R purple wrap
  • Marvel R pink wrap
  • Marvel R teal wrap
  • Marvel R brown wrap
  • Marvel R gold wrap
  • Marvel R chrome wrap
  • Marvel R color shift wrap
  • Marvel R carbon fiber wrap
  • Marvel R camo and patterned wrap

How much vinyl to wrap a Feifan Marvel R

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2021–nowSUV (5 doors)184.0 in (4,674 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Marvel R wrap cost factors

A Marvel R wrap cost depends on the size of the vehicle, the film you choose and the labor in your area. The car is 184.0 in (4,674 mm) long, which sets a clear amount of film and cutting. A chrome or patterned film raises the material figure to about 70 ft (21.5 m), while plain cast film needs about 62 ft (19 m). The charge port door adds one small extra piece to cut and fit.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Electric car: the charge port door is wrapped as a small piece of its own.

Marvel R wraps by generation

Swipe sideways. Tap a card for the full description.

Feifan Marvel R, first generation, factory photo
Factory color shown

2021–now Marvel R SUV (first generation)

2021–nowSUV (5 doors)184.0 in (4,674 mm)

The first generation of the Feifan Marvel R has a 5-door SUV body that is 184.0 in (4,674 mm) long. That length gives the installer a large tailgate, four full doors and long roof rails to cover. The body breaks into about the same number of wrap panels as other mid-size SUVs. A full wrap uses about 62 ft (19 m) of 60-inch (1.52 m) cast film, or about 70 ft (21.5 m) with chrome or patterned film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Electric car: the charge port door is wrapped as a small piece of its own.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on a Marvel R

A partial wrap on a Marvel R can be a roof, hood and mirror caps done as one color change. A chrome delete covers the window trim and badges with black film. Paint protection film is a clear film put on the front end to guard the hood, bumper and fenders.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Feifan Marvel R: body, cut-outs and film

A Feifan Marvel R vinyl wrap treats a 5-door SUV body that is 184.0 in (4,674 mm) long. Its tall sides and large tailgate use more film than a small hatchback. The wrap still breaks down into a normal set of panels: bumpers, fenders, doors, roof, hood and tailgate.

Marvel R wrap ideas work around two special areas on this electric car. The tailgate carries the rear glass in it, so the film ends cleanly at the edge of that glass. The charge port door is wrapped as a small piece of its own, not as part of the rear quarter panel.

When you work out how much vinyl to wrap a Marvel R, one generation keeps the count simple. The first generation is the only body in the 2021–now range. Its one length and one door style mean the film estimate stays the same for every Marvel R.

Questions about wrapping a Feifan Marvel R

How much vinyl does it take to wrap a Feifan Marvel R?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast film to wrap a Feifan Marvel R. If the wrap uses chrome or patterned film, allow about 70 ft (21.5 m). The car is an electric SUV with a tall tailgate and five doors.

Can I wrap only the hood or the roof of a Marvel R?

Yes, you can wrap only the hood or the roof of a Marvel R. A shop can wrap the roof, hood and mirror caps as one small color change job. The film is cut to those panels and does not need to cover the rest of the SUV.

Is a Marvel R hard to wrap?

A Marvel R adds two extra steps that make the wrap a little more work than a plain SUV. The tailgate has the rear glass in it, so the installer must trim the film exactly along the edge of that glass. The charge port door needs its own small piece of film, which adds a cut and a seam.

How many generations of the Marvel R does this page cover?

This page covers one generation of the Marvel R. The first generation has been in production from 2021 to now, and no other generation is listed.