Wraps by car

FSO 125p wrap

The FSO 125p wrap page covers vinyl wrap for the compact FSO 125p, produced in one generation from 1967 to 1992. A full wrap of the newest 125p body takes about 43 ft (13 m) for the pickup to 51 ft (15.5 m) for the wagon, using 60-inch (1.52 m) cast film. The car was built in pickup, sedan, and wagon styles with two, four, or five doors.

1generations13 mof film for a full wrap

FSO 125p, first generation, factory photo
FSO 125p, first generation. Factory color shown.

FSO 125p wrap colors and ideas

  • FSO 125p black wrap
  • FSO 125p white wrap
  • FSO 125p gray wrap
  • FSO 125p silver wrap
  • FSO 125p red wrap
  • FSO 125p blue wrap
  • FSO 125p green wrap
  • FSO 125p yellow wrap
  • FSO 125p orange wrap
  • FSO 125p purple wrap
  • FSO 125p pink wrap
  • FSO 125p teal wrap
  • FSO 125p brown wrap
  • FSO 125p gold wrap
  • FSO 125p chrome wrap
  • FSO 125p color shift wrap
  • FSO 125p carbon fiber wrap
  • FSO 125p camo and patterned wrap

How much vinyl to wrap an FSO 125p

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1992pickup, sedan, wagon (2 or 4 or 5 doors)166.5 in (4,230 mm) to 166.9 in (4,240 mm)about 43 ft (13 m) for the pickup to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

FSO 125p wrap cost factors

The FSO 125p wrap cost depends on the body style, the film choice, and the amount of disassembly the job requires. A pickup wrap covers the cab and the bed as two bodies, which adds labor, while a wagon uses more film at up to 51 ft (15.5 m). Chrome or patterned film can raise the material need to about 66 ft (20 m). The condition of the old paint also affects the preparation time before the film goes on.

  • Film for a full wrap: about 43 ft (13 m) for the pickup to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: pickup, sedan, wagon (2 or 4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

FSO 125p wraps by generation

Swipe sideways. Tap a card for the full description.

FSO 125p, first generation, factory photo
Factory color shown

1967–1992 FSO 125p pickup, sedan, wagon (first generation)

1967–1992pickup, sedan, wagon (2 or 4 or 5 doors)166.5 in (4,230 mm) to 166.9 in (4,240 mm)

The FSO 125p first generation built from 1967 to 1992 includes pickup, sedan, and wagon styles. For a wrap, the pickup bed is treated as a separate body from the cab, and the inside of the bed stays bare. The rear glass sits in the tailgate, so the installer trims the film to the edge of the glass.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 43 ft (13 m) for the pickup to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an FSO 125p

An FSO 125p owner can choose a partial wrap, a chrome delete, or paint protection film instead of a full color change. The hood and roof can be wrapped as single panels, and the mirror caps make a small accent job. Chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an FSO 125p: body, cut-outs and film

The FSO 125p vinyl wrap work is shaped by the body style and size of this compact car. The pickup needs about 43 ft (13 m) of 60-inch (1.52 m) cast film, while the longer wagon can take up to 51 ft (15.5 m). A sedan sits between these figures, and all bodies measure 166.5 in (4,230 mm) to 166.9 in (4,240 mm) in length.

For FSO 125p wrap ideas, the installer plans cut-outs and removal around the pickup bed and the tailgate. The tailgate carries the rear glass, so the film ends at the edge of the glass and the glass itself is left clear. On the pickup, the cab and the bed are wrapped as two separate bodies, and the inside of the bed is not wrapped.

When counting how much vinyl to wrap an FSO 125p, the single generation means the figure depends on the body style rather than the production year. The pickup, sedan, and wagon bodies share the same length range of 166.5 in (4,230 mm) to 166.9 in (4,240 mm). The wagon uses the most film, up to about 51 ft (15.5 m), and the pickup the least, about 43 ft (13 m).

Questions about wrapping an FSO 125p

How much vinyl does it take to wrap an FSO 125p?

A full wrap of an FSO 125p takes about 43 ft (13 m) for the pickup and up to 51 ft (15.5 m) for the wagon, using 60-inch (1.52 m) cast film. With chrome or patterned film, the amount can reach about 66 ft (20 m). These figures cover the exterior panels of the newest body, the 1967–1992 first generation.

Is the bed of an FSO 125p wrapped?

No, the inside of the bed on an FSO 125p pickup is not wrapped. The cab and the outside of the bed are covered as two separate bodies, and the film ends at the top rails and the tailgate. The tailgate itself is wrapped only up to the edge of the rear glass.

Which FSO 125p body takes more film?

The FSO 125p wagon takes more film than the pickup or the sedan. A full wrap of the wagon needs about 51 ft (15.5 m), while the pickup needs about 43 ft (13 m). The sedan falls between these two amounts, depending on the number of doors.

Can I wrap only the hood or the roof of an FSO 125p?

Yes, you can wrap only the hood or the roof of an FSO 125p as a partial job. A partial wrap can also cover the mirror caps, and chrome delete addresses the window trim and badges. Paint protection film is another smaller option, applied as a clear film on the front end.