Wraps by car

FSO 127p wrap

The FSO 127p wrap page covers the first generation FSO 127p, a subcompact hatchback produced from 1971 to 1976. A full vinyl wrap of this car takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 51 ft (15.5 m) to cover the same body.

1generations12 mof film for a full wrap

FSO 127p, first generation, factory photo
FSO 127p, first generation. Factory color shown.

FSO 127p wrap colors and ideas

  • FSO 127p black wrap
  • FSO 127p white wrap
  • FSO 127p gray wrap
  • FSO 127p silver wrap
  • FSO 127p red wrap
  • FSO 127p blue wrap
  • FSO 127p green wrap
  • FSO 127p yellow wrap
  • FSO 127p orange wrap
  • FSO 127p purple wrap
  • FSO 127p pink wrap
  • FSO 127p teal wrap
  • FSO 127p brown wrap
  • FSO 127p gold wrap
  • FSO 127p chrome wrap
  • FSO 127p color shift wrap
  • FSO 127p carbon fiber wrap
  • FSO 127p camo and patterned wrap

How much vinyl to wrap an FSO 127p

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1976hatchback (3 doors)130.7 in (3,320 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m)

FSO 127p wrap cost factors

FSO 127p wrap cost depends on the size of the car and the film grade, not on a fixed price list. A full wrap uses about 39 ft (12 m) of 60-inch (1.52 m) cast film, and a chrome or patterned film uses about 51 ft (15.5 m). The amount of disassembly and the condition of the 1971–1976 paint also affect the labor time.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

FSO 127p wraps by generation

Swipe sideways. Tap a card for the full description.

FSO 127p, first generation, factory photo
Factory color shown

1971–1976 FSO 127p hatchback (first generation)

1971–1976hatchback (3 doors)130.7 in (3,320 mm)

The first generation FSO 127p was built from 1971 to 1976, so paint age matters before a wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. An installer tests adhesion on a small area to see if the old paint can hold the film without lifting.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 51 ft (15.5 m).

Roof, hood, chrome delete and PPF on an FSO 127p

FSO 127p partial wrap options cover the roof, hood, and mirror caps as separate color change jobs. A chrome delete on the FSO 127p covers the window trim and badges with black film. Paint protection film (PPF) on the front end uses clear film to guard the nose and the leading edge of the hood.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an FSO 127p: body, cut-outs and film

The FSO 127p vinyl wrap is sized around a short hatchback body with three doors and a length of 130.7 in (3,320 mm). This compact silhouette keeps each side panel small, so the wrap installer can handle most pieces without a second pair of hands. The tailgate glass reaches close to the roof, which reduces the film area on the rear panel.

FSO 127p wrap ideas start with the factory shape: a tailgate with the rear glass in it, where the film ends at the edge of the glass. Two long side doors mean each door is one large piece of film, so the graphic can run uninterrupted from the front wing to the rear quarter. Installers cut the film cleanly around the door handles and the window rubbers.

To figure how much vinyl to wrap an FSO 127p, count one generation in this catalog: the first generation built from 1971 to 1976. There is no second generation to change the panel sizes, so the film estimate stays the same for every hatchback of this model. The 39 ft (12 m) figure for standard film assumes a clean, complete exterior with no extra accessories.

Questions about wrapping an FSO 127p

How much vinyl does it take to wrap an FSO 127p?

A full wrap of an FSO 127p takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, the amount goes up to about 51 ft (15.5 m). These figures are for the first generation hatchback body of this page.

Can I wrap only the hood or the roof of an FSO 127p?

Yes, you can wrap only the hood or the roof of an FSO 127p. The partial wrap options on this page include the roof, hood, and mirror caps as separate jobs. A professional can also wrap just the window trim and badges as a chrome delete.

Is an FSO 127p hard to wrap?

The FSO 127p adds work in two specific areas: the tailgate with the rear glass in it and the two long side doors. The film must end at the edge of the glass on the tailgate, and each side door is one large piece of film. The short 130.7 in (3,320 mm) body helps, but the glass and door shapes need careful cutting.

How many generations of the FSO 127p does this page cover?

This page covers one generation of the FSO 127p. The first generation was built from 1971 to 1976, and the film estimate here is for that body only. There are no other generations in this catalog.