Wraps by car

FSO 126p wrap

The FSO 126p wrap guide covers the single-generation mini hatchback produced from 1973 to 1991. A full vinyl wrap of this car takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 49 ft (15 m) to the total.

1generations11.5 mof film for a full wrap

FSO 126p, first generation, factory photo
FSO 126p, first generation. Factory color shown.

FSO 126p wrap colors and ideas

  • FSO 126p black wrap
  • FSO 126p white wrap
  • FSO 126p gray wrap
  • FSO 126p silver wrap
  • FSO 126p red wrap
  • FSO 126p blue wrap
  • FSO 126p green wrap
  • FSO 126p yellow wrap
  • FSO 126p orange wrap
  • FSO 126p purple wrap
  • FSO 126p pink wrap
  • FSO 126p teal wrap
  • FSO 126p brown wrap
  • FSO 126p gold wrap
  • FSO 126p chrome wrap
  • FSO 126p color shift wrap
  • FSO 126p carbon fiber wrap
  • FSO 126p camo and patterned wrap

How much vinyl to wrap an FSO 126p

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1973–1991hatchback (3 doors)128.7 in (3,270 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

FSO 126p wrap cost factors

The FSO 126p wrap cost depends on film type, surface preparation, and the number of panels you cover. A full wrap on this 128.7 in (3,270 mm) mini hatchback uses about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the material amount to roughly 49 ft (15 m). Older paint may need more preparation before film is applied.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

FSO 126p wraps by generation

Swipe sideways. Tap a card for the full description.

FSO 126p, first generation, factory photo
Factory color shown

1973–1991 FSO 126p hatchback (first generation)

1973–1991hatchback (3 doors)128.7 in (3,270 mm)

The first generation FSO 126p from 1973 to 1991 has paint that may be original or repainted, so a test spot is advised before a full wrap. Panel condition varies on a car of these years, and wrap film needs a smooth, stable surface to bond properly. The hatchback body is the only style listed for this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on an FSO 126p

Partial wrap jobs on an FSO 126p include the roof, hood, and mirror caps. Chrome delete covers window trim and badges with black film, while paint protection film (PPF) can be applied as clear film on the front end. These smaller jobs use less material than a full wrap and can be done on their own.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an FSO 126p: body, cut-outs and film

The FSO 126p is a mini three-door hatchback, so a vinyl wrap uses less film than on larger cars. At 128.7 in (3,270 mm) long, the body has short panels that help keep material waste low. The two long side doors are each covered with one large piece of film, which reduces seams.

FSO 126p wrap ideas should account for the tailgate with its rear glass, where film ends at the edge of the glass. The two long side doors are wrapped as single pieces, so any graphic must fit within each door panel. Roof and hood are simple flat areas that suit solid colors or small patterns.

How much vinyl to wrap an FSO 126p depends on which generation you have, and this page lists only the first generation from 1973 to 1991. The hatchback body is the only style in the catalog, so film estimates stay the same across those years. If you plan chrome or patterned film, you need about 49 ft (15 m) instead of 38 ft (11.5 m).

Questions about wrapping an FSO 126p

How much vinyl does it take to wrap an FSO 126p?

A full wrap of an FSO 126p takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film increases the amount to around 49 ft (15 m).

Can I wrap only the hood or the roof of an FSO 126p?

Yes, you can wrap only the hood or the roof of an FSO 126p. Partial wrap jobs include the roof, hood, and mirror caps, and they use less film than a full wrap.

Is an FSO 126p hard to wrap?

An FSO 126p is manageable to wrap but has some challenges. The tailgate with rear glass requires careful trimming at the glass edge, and the two long doors are large single pieces that need careful handling. At 38 ft (11.5 m) of film, the small size keeps the job shorter than on bigger cars.

How many generations of the FSO 126p does this page cover?

This page covers one generation of the FSO 126p, produced from 1973 to 1991. The catalog lists only the first generation hatchback.