Wraps by car

Geo Metro wrap

The Geo Metro wrap page covers the first generation subcompact sold from 1989 to 1997. It lists the body styles and the wrap film each one needs. A full wrap of the newest body takes about 43 ft (13 m) to 46 ft (14 m) of 60-inch (1.52 m) cast vinyl wrap.

1generations13 mof film for a full wrap

Geo Metro, first generation, factory photo
Geo Metro, first generation. Factory color shown.

Geo Metro wrap colors and ideas

  • Metro black wrap
  • Metro white wrap
  • Metro gray wrap
  • Metro silver wrap
  • Metro red wrap
  • Metro blue wrap
  • Metro green wrap
  • Metro yellow wrap
  • Metro orange wrap
  • Metro purple wrap
  • Metro pink wrap
  • Metro teal wrap
  • Metro brown wrap
  • Metro gold wrap
  • Metro chrome wrap
  • Metro color shift wrap
  • Metro carbon fiber wrap
  • Metro camo and patterned wrap

How much vinyl to wrap a Geo Metro

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1989–1997convertible, hatchback, sedan (2 or 3 or 4 doors)147.4 in (3,745 mm) to 164.0 in (4,166 mm)about 43 ft (13 m) for the convertible to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Metro wrap cost factors

Metro wrap cost depends on the size of the body and the film type. A smaller convertible uses about 43 ft (13 m) of film, while a sedan needs about 46 ft (14 m). Chrome or patterned film requires up to about 57 ft (17.5 m), which raises the material amount. The complexity of wrapping panels on a subcompact body also adds labor time.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, hatchback, sedan (2 or 3 or 4 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Metro wraps by generation

Swipe sideways. Tap a card for the full description.

Geo Metro, first generation, factory photo
Factory color shown

1989–1997 Metro convertible, hatchback, sedan (first generation)

1989–1997convertible, hatchback, sedan (2 or 3 or 4 doors)147.4 in (3,745 mm) to 164.0 in (4,166 mm)

The first generation Geo Metro includes a convertible with a top that is not wrapped when it is fabric. The film ends where the fabric begins, so the wrap stops at the edges of the top opening. A folding hard top is wrapped as panels of its own, with seams at its moving parts. The length of the first generation ranges from 147.4 in (3,745 mm) to 164.0 in (4,166 mm).

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) for the convertible to 46 ft (14 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Metro

A partial wrap on a Metro can cover the roof, hood, or mirror caps. Metro chrome delete involves covering window trim and badges with black film. Paint protection film (PPF) is clear film applied on the front end to guard against stone chips. These smaller jobs use less vinyl than a full wrap and still change the look.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Geo Metro: body, cut-outs and film

The Geo Metro vinyl wrap is sized for a body between 147.4 in (3,745 mm) and 164.0 in (4,166 mm) long. The convertible, two-door hatchback, three-door hatchback, and four-door sedan all use less film than larger cars. A wrap on the convertible uses about 43 ft (13 m) of film. The sedan uses roughly 46 ft (14 m) of the same 60-inch (1.52 m) vinyl.

Metro wrap ideas usually start with handling the fabric top on the convertible. A fabric top is not wrapped and the film ends where it begins, while a folding hard top is wrapped as panels of its own. For the hatchback, a tailgate with the rear glass in it means the film ends at the edge of the glass. Any wrap job on these bodies needs clean cut-outs around the glass and trim.

How much vinyl to wrap a Metro depends on the trim and film choice. A plain color change wrap uses about 43 ft (13 m) to 46 ft (14 m) of standard cast film. A chrome or patterned film needs up to about 57 ft (17.5 m) because of the extra material for matching patterns. The difference is small between generations since there is only one generation in this catalog.

Questions about wrapping a Geo Metro

How much vinyl does it take to wrap a Geo Metro?

About 43 ft (13 m) to 46 ft (14 m) of 60-inch (1.52 m) cast vinyl wrap is needed for a Geo Metro. The lower figure suits the convertible and the higher figure suits the sedan. A chrome or patterned film can require up to about 57 ft (17.5 m) due to matching patterns.

Is the top of a Metro wrapped?

No, the top of a Metro is not wrapped when it is a fabric top on the convertible. The film ends where the fabric begins, so there is no vinyl over the soft top. A folding hard top is wrapped as panels of its own.

Which Metro body takes more film?

The sedan takes more film than the convertible and hatchback. A sedan needs about 46 ft (14 m) of 60-inch (1.52 m) cast film, while a convertible needs about 43 ft (13 m). The hatchback falls between those figures depending on its doors.

Can I wrap only the hood or the roof of a Metro?

Yes, you can wrap only the hood or the roof of a Metro. A partial wrap can cover the roof, hood, or mirror caps, and uses much less film than a full wrap. A Metro chrome delete covers window trim and badges with black film.