Wraps by car

Geo Prizm wrap

This page covers the Geo Prizm wrap for both cataloged generations. The Geo Prizm is a compact sedan produced across two generations in the catalog. A full wrap of the newest body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

2generations15 mof film for a full wrap

Geo Prizm, third generation, factory photo
Geo Prizm, third generation. Factory color shown.

Geo Prizm wrap colors and ideas

  • Prizm black wrap
  • Prizm white wrap
  • Prizm gray wrap
  • Prizm silver wrap
  • Prizm red wrap
  • Prizm blue wrap
  • Prizm green wrap
  • Prizm yellow wrap
  • Prizm orange wrap
  • Prizm purple wrap
  • Prizm pink wrap
  • Prizm teal wrap
  • Prizm brown wrap
  • Prizm gold wrap
  • Prizm chrome wrap
  • Prizm color shift wrap
  • Prizm carbon fiber wrap
  • Prizm camo and patterned wrap

How much vinyl to wrap a Geo Prizm

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1997–2002sedan (4 doors)174.4 in (4,430 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)
1992–1997sedan (4 doors)173.0 in (4,395 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Prizm wrap cost factors

Prizm wrap cost depends on the film area, the wrap type and the condition of the paint. A full color change on this compact sedan uses about 49 ft (15 m) of cast film. Partial jobs such as a roof or hood use less film and less labor.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Prizm wraps by generation

Swipe sideways. Tap a card for the full description.

Geo Prizm, third generation, factory photo
Factory color shown

1997–2002 Prizm sedan (third generation)

1997–2002sedan (4 doors)174.4 in (4,430 mm)

The third generation Geo Prizm ran from 1997 to 2002 and needs a paint check before a full wrap. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. A repainted panel can lift the film when it comes off, so an installer checks adhesion on a small area first.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Geo Prizm, second generation, factory photo
Factory color shown

1992–1997 Prizm sedan (second generation)

1992–1997sedan (4 doors)173.0 in (4,395 mm)

The second generation Geo Prizm ran from 1992 to 1997 and is a four-door sedan that fits the same film amount. The size and the body style of this car mean the number of panels and the amount of film are the same as the later body. The sedan has a hood, roof, trunk and four doors to cover in full wrap work.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Prizm

A Prizm chrome delete covers the window trim and badges with black film for a partial wrap look. Other partial wrap jobs on this car are the roof, hood and mirror caps. Paint protection film (PPF) is clear film on the front end for a low-key partial job.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Geo Prizm: body, cut-outs and film

The Geo Prizm vinyl wrap has one body style across both generations. The four-door sedan measures 174.4 in (4,430 mm) long in the third generation and 173.0 in (4,395 mm) long in the second generation. The single body style means every panel is a sedan panel with four doors and a trunk lid.

Prizm wrap ideas begin with a clean plan for the door handles, mirrors and trim. The door handles, mirrors, grille, badges and antenna need cut-outs or come off for a neat wrap. Removing the mirrors and handles lets the film tuck into the edges for a longer-lasting install.

How much vinyl to wrap a Prizm depends on the generation but not much changes between them. Both generations are about the same length and have the same four-door sedan body. The film estimate is the same at about 49 ft (15 m) for a full change of color.

Questions about wrapping a Geo Prizm

How much vinyl does it take to wrap a Geo Prizm?

A full wrap of a Geo Prizm takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. For chrome or patterned film the estimate is about 61 ft (18.5 m). The car's compact sedan body keeps the film amount similar across both generations.

Can I wrap only the hood or the roof of a Prizm?

Yes, a Prizm can be wrapped only on the hood or the roof. Partial wrap jobs for this car are the roof, hood and mirror caps. A hood-only or roof-only wrap uses less film and leaves the rest of the paint visible.

Is a Prizm hard to wrap?

A Prizm is not hard to wrap, but the door handles, mirrors and badges add work. The wrap installer must remove or cut around the door handles, mirrors, grille, badges and antenna. The sedan's simple flat panels make the main areas straightforward.

How many generations of the Prizm does this page cover?

This page covers two generations of the Geo Prizm. The second generation is from 1992 to 1997 and the third generation is from 1997 to 2002. Both are four-door sedans with the same wrap film estimate.