Wraps by car

Haval H6 Coupe wrap

This Haval H6 Coupe wrap guide covers the first-generation SUV built from 2017 to 2019 and the second generation produced from 2020 onward. A full vinyl wrap of the newer body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The catalog also explains chrome or patterned film needs and what changes between these two generations.

2generations18.5 mof film for a full wrap

Haval H6 Coupe, second generation, factory photo
Haval H6 Coupe, second generation. Factory color shown.

Haval H6 Coupe wrap colors and ideas

  • H6 Coupe black wrap
  • H6 Coupe white wrap
  • H6 Coupe gray wrap
  • H6 Coupe silver wrap
  • H6 Coupe red wrap
  • H6 Coupe blue wrap
  • H6 Coupe green wrap
  • H6 Coupe yellow wrap
  • H6 Coupe orange wrap
  • H6 Coupe purple wrap
  • H6 Coupe pink wrap
  • H6 Coupe teal wrap
  • H6 Coupe brown wrap
  • H6 Coupe gold wrap
  • H6 Coupe chrome wrap
  • H6 Coupe color shift wrap
  • H6 Coupe carbon fiber wrap
  • H6 Coupe camo and patterned wrap

How much vinyl to wrap a Haval H6 Coupe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2020–nowSUV (5 doors)180.7 in (4,590 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)
2017–2019SUV (5 doors)179.1 in (4,549 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

H6 Coupe wrap cost factors

The H6 Coupe wrap cost depends on the generation, the film type, and the amount of material. The first generation needs about 66 ft (20 m) of 60-inch (1.52 m) cast film, and the second needs about 61 ft (18.5 m). Chrome or patterned film raises the amount to about 77 ft (23.5 m) on the first and about 69 ft (21 m) on the second. Labor also varies with the number of cut-outs and removable parts, especially on the first generation.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

H6 Coupe wraps by generation

Swipe sideways. Tap a card for the full description.

Haval H6 Coupe, second generation, factory photo
Factory color shown

2020–now H6 Coupe SUV (second generation)

2020–nowSUV (5 doors)180.7 in (4,590 mm)

The second-generation Haval H6 Coupe is 180.7 in (4,590 mm) long and has a five-door SUV body. Its wrap estimate is about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) for chrome or patterned film. The only listed wrap fact is a tailgate with the rear glass in it, so the film ends at the edge of that glass. Fewer cut-outs and removable parts make this generation a straightforward full wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Haval H6 Coupe, first generation, factory photo
Factory color shown

2017–2019 H6 Coupe SUV (first generation)

2017–2019SUV (5 doors)179.1 in (4,549 mm)

On the first-generation Haval H6 Coupe, every trim has roof rails that must come off before wrapping the roof, or the film is cut along them. Removing the roof rails gives a cleaner finish and avoids visible seams. Cutting along them saves labor but leaves the rails in place and may show more film edges. This is one of several extra steps on this generation, along with sensors, cameras, and bright moldings.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on an H6 Coupe

A partial wrap on an H6 Coupe covers the roof, hood, or mirror caps only. H6 Coupe chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less vinyl and focus on specific areas instead of the whole SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping a Haval H6 Coupe: body, cut-outs and film

The Haval H6 Coupe vinyl wrap is a midsize SUV with five doors and similar lengths in both generations. The second generation is 180.7 in (4,590 mm) long, while the first is 179.1 in (4,549 mm). Both bodies have a tailgate with the rear glass in it, so the film ends at the edge of that glass. A wrap on either generation covers the same major panels, but the amount of film differs only slightly.

Planning H6 Coupe wrap ideas means accounting for cut-outs and removable parts. The first generation has more items to work around: every trim has roof rails, bright decorative moldings, parking sensors in the bumpers, cameras in the body, and fog lamps in the front bumper. Some trims also have a sunroof, so the roof film is cut around its opening. The second generation's data lists only the tailgate glass as a wrap fact.

To know how much vinyl to wrap an H6 Coupe, check the generation and the film type. The first generation takes about 66 ft (20 m) of 60-inch (1.52 m) cast film for a full wrap, while the second takes about 61 ft (18.5 m). Chrome or patterned film requires more material: about 77 ft (23.5 m) on the first generation and about 69 ft (21 m) on the second. These figures are estimates for a complete color change wrap.

Questions about wrapping a Haval H6 Coupe

How much vinyl does it take to wrap a Haval H6 Coupe?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap the newest Haval H6 Coupe. That figure is for a full color change wrap on the second-generation body, which is 180.7 in (4,590 mm) long. Chrome or patterned film would need about 69 ft (21 m) on the same generation.

Can I wrap only the hood or the roof of an H6 Coupe?

Yes, you can wrap only the hood or the roof of an H6 Coupe. A partial wrap includes the roof, hood, or mirror caps as separate options. This is less work than a full wrap and uses less vinyl. On the first generation, the roof job must handle the roof rails and possible sunroof.

Is an H6 Coupe hard to wrap?

An H6 Coupe is not hard to wrap, but the first generation adds work with its roof rails, sunroof on some trims, bright moldings, parking sensors, cameras, and fog lamps. The roof rails must be removed or the film cut along them. Those cut-outs and removable parts increase labor compared to the second generation. The second generation is simpler, with only the tailgate glass needing the film to end at its edge.

How many generations of the H6 Coupe does this page cover?

This page covers two generations of the H6 Coupe: the first from 2017 to 2019 and the second from 2020 onward. The newest generation takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. The earlier generation takes about 66 ft (20 m) of the same film.